I cannot use my tv card in opensuse 11.3. All were working fine in opensuse 11.1. it seems to be that my car is well recognize but channels search doesn't work at all. My Tv card is a Hauppage Wintv (bttv 878). Here the result of lsmod command :
Module Size Used by
ip6t_LOG 5898 6
xt_tcpudp 2859 2
xt_pkttype 1288 3
[code]....
Sound should be easy. Far more easy than video, but i experience more problems with sound, than with my Nvidia GFX-card.It seems OpenSUSE use several type of sound-systems like Alsa-sound, Pulseaudio and OSS. Then its somthing called Xine and GStream that i've never heard about.I have OpenSUSE 11.3 64bits with KDE4.6.1What should i use and what can i uninstall?Now it seems i'm using PulsAudio with Xine-backend.
View 3 Replies View RelatedI have an external USB Sound Card (Audiophile Fubar II DAC) that worked flawlessy up to one or two months ago when suddenly it stopped to make any sound. The card, speakers, etc. are working, I tried it from another OS running on the very same PC. The card is detected, but it's dumb
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[code]....
The card appears under System->Preferences->Sound->Hardware but there are two unusual things (if I remember correctly). 1. The green sound card icon on the left is not shown, it's not gray, there is nothing (but the USB Headset, that works well, doesn't have the icon either so maybe it'ok).
2. From the Profiles dropdown I can only choose from four options (off, analog mono, analog stereo and digital duplex). Before there were more (digital output only, etc.).I checked the levels several times. Another external USB card (SB Xi-Fi 5.1) works well.
I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.
View 7 Replies View RelatedWhen I had UBUNTU 10.04 sound WORKED!I have post several threads about this issue, I hope this would be the last one, My OS version is Ubuntu 11.04, my hardware is: Nvidia GTS 450 video Card EGS; and an integrated sound card reference: Via Azalia HDAC VT1708/A; After installing ubuntu I had no audio through my integrated sound card, I cant use my NVidia HDA card because I need for it an HDMI AUDIO, and I dont have any HDMI sound devices like dvd or TV. So I need to use my integrated default Via soundcard. I Updated the OS, nothing changed. After typing aplay -l it showed this:
aplay -l
**** Lista de PLAYBACK dispositivos hardware ****
tarjeta 0: NVidia [HDA NVidia], dispositivo 3: HDMI 0 [HDMI 0]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
[code]....
Am using ACER Aspire 5745G which has switchable graphics. I recently installed Ubuntu 11.04 - the Natty Narwhal i updated everything after the installation. Now the issue is that when i go to NVIDIA X Server Settings, its giving me an error message:- " You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. " Error.jpg also tried searching in the forum but it was so confusing, as am Newbie i have no idea where to start.
View 2 Replies View RelatedI can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
I'm in a real mess I have been reading loads of forums and wikis for a week now, trying to work out how to configure mythtv and ALSA to pick up the audio output from my hauppauge HVR 1300. I am using it to watch the RF output from a sky box, so there is only one channel which I have managed to tune ok.
I can listen to other sources of audio such as dvd mp3 etc. and I have run speaker test pointing at ALSA:default and I get audio, but when I point mythtv at ALSA:default I get glorious silence which for once is not what I want.
I have read some comments about having to redirect the audio output with sox but have not really understood how, and there are other comments about connecting a cable between the tv card and the aux in of the sound card but have not hmanaged to find a way of doing that either. If there is someone who have used this card and configured the analog audio I would love to know how you did it.
I'm running Amarok 1.4 and I frequently need to restart the sound daemon. As far as I can tell; no applications are using it at the time, but alsa cycles through my playlist without playing anything (i.e. loads track, doesn't play it, moves to the next track, so on and so forth).
I'm pretty sure this would have something to do with another process using the sndcard. I just don't know which one so I can kill it and troubleshoot why it's doing it.
I have 2 sound cards : one is on board and other is Creative sound blaster.I want to play sounds just on Crative.The problem is when I reboot the PC the sound is change,sometime the default sound card is Creative sometime is the onboard card.I want my default sound card to be only Creative.
View 2 Replies View RelatedHow to configure sound card in opensuse 11.1. I tried some of the solutions like alsaconf but its not working .... Also please tell me how to find model of sound card that I have in my laptop. Laptop that I am using is DELL inspiron15r, core i5.
View 1 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedHas anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).
View 9 Replies View RelatedInstalled a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
After some difficulties I succeeded to run this TV card under SUSE 11.1 with kaffeine 0.8.8.Everything works fine except for that the card refuses to tune on a DVB-S2 transponder. (For Example TP 11 on Astra 19.2E)The terminal output looks like this:
Tuning to: Das Erste HD / autocount: 1
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11362000 h 22000000
[code]....
A few days ago I setup a pc. It contains an "Intel ICH5" sound card. Before I begin posting all the configuration stuff I've tried so far what the standard procedures are to set it all up for recording the sound card output (with Audacity)?
On my older computer it all worked fine but now I only get silent recordings. However sometimes (when I played on the controls the right way...) I get recordings where you can (amoung some noise) recognize the stuff I actually wanted to record very low... Apart from Audacity I've also tried
Code:
arecord -vv -fdat audio.wav
which didn't work either. That's why I think the problem is not related to Audacity but to the system.
Is the combination of OpenSuse 11.2 + ALSA + Intel ICH5 commonly known to cause such trouble?
I have a Pinnacle IEEE 1394 card which according to Yast/Hardware Information seems to be installed and recognised correctly.
Trying to use Kino to download from a Camcorder via IEEE 1394 nothing happens and looking at Kino Preferences IEEE 1394 tab it tells me:
"The IEEE Subsystem is not responding. The raw 1394 module must be loaded, and you must have read and write access to /dev/raw1394."
I do not have an entry /dev/raw1394 on my system. Files libraw1394 and libraw1394-8 were installed by default(SUSE 11.3 64bit), and I have since installed any others offered which were libraw1394-8-32bit, libraw1394-devel, libraw1394-devel-32bit but to no avail.
Had a well working sound system until I bought a USB webcam with microphone. Sound still works well except with flash. As mentioned here my problem is making flash use my normal sound card instead of the USB webcam microphone.
View 2 Replies View Related1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
Just switched to openesuse and kde enviroment few days ago, and now I'm snooping around etc.
Anyway I'm having this problem, I'm running a file server at home for my video, data, music and so on. I've used ubuntu untill now (server is also running ubuntu), and I've used vlc to watch the files directly from the server, I never had any problems with it until now (in ubuntu gnome). I navigated with nautilus to a location on the server double clicked and the video opend in my local vlc. Now I'm getting the tittle error, using opensuse 11.2 kde 4 and dolphin. Also I'm told to check the log...
While back I installed dolphin in my gnome on ubuntu, and i remember I got the same error when i tred to open the file on a server and tried to play it in vlc tru dolphin. So...Is this a known issue? Could this be related to dolphin/kde? Where is the vlc log file in opensuse 11.2? Where can I find some workarounds or something?
I've already went thorough "Check your multimedia problem in ten steps" and "Multi-media and Restricted Format Installation Guide", but still no luck. When I try to play video Kaffeine just throw out big red cross and then nothing palys.
Code:
LC_ALL=C zypper ve
Loading repository data...
Reading installed packages...
Dependencies of all installed packages are satisfied.
Code:
rpm --query --all 'libav*' 'libpostproc*' 'libswscale*' '*xine*' '*gst*' MPlayer '*vlc*' | grep -v avahi | sort
bluez-gstreamer-4.56-1.1.1.i586
gstreamer-0_10-0.10.28-999.pm.1001.1.i586
[code]....
my sound did work and i ripped on CD in Banshee and now it does not have any sound. tried looking for a related forum question and on page 2 there is a post "11.3 Gnome, totem, banshee no sound" that followed with no success. how do i get my sound on? tried all the normal checks to make sure it was not on mute.
View 4 Replies View RelatedI have installed Open Suse 11.2. I am unable to play mp3 files. The player open and stops
View 1 Replies View RelatedMy video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
i use kde 4.4when i try to start amarok (2.2.90) i get:
amarok: symbol lookup error: /usr/lib64/libamaroklib.so.1: undefined symbol: _ZN6Plasma7WebView10itemChangeEN13QGraphicsItem18GraphicsItemChangeERK8QVariant
I'm running openSUSE 11.1 32-bit and I'm trying to use my external USB DVD-RW drive. I've tried loading two 11.1 discs in the drive and both of them fail.After putting the dvd in the drive I mount with::mount/dev /scd0 /media/cdrom
and it comes back with:mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so.Second question is can I use this external USB DVD-RW drive to install linux from, or does it have to be an internal drive? If so is there anything special I need to do to get it to look at the drive during boot. I take it this is dependant on a BIOS setting. This is all assuming of course I can get my dvd's to read.
I have the 64bit version of SuSe 11.2 installed on my PC. For some reason it cannot read a Jessops photo cd which reads ok on a windows pc or any other cd with photos on it, it has no problem reading other cds with program files on them.
View 9 Replies View RelatedI did a clean install of 11.3 and everything went good but i have a problem. There is no sound when i try to watch a movie in VLC, Kaffeine, SMPlayer and xine. But when i open the movie (.avi format) with Dragon player it plays as it should be. I have sound when i test the output in KDE system settings and i listen to music as i write this message. I tried with Xine and GStreamer output but the problem stays. I have all the multimedia codecs that are needed installed. Here is my repo list:
Code:
[code]....
Isn't the scrobbler (or whatever it is called) built into the newer Amarok as it used to? I recently upgraded to 2.3.1 and I can not find any possibility to connect with Last.fm. Do one have to install it separately instead?I am on OS 11.2 and upgraded through KDE application update repo.
View 2 Replies View Related