my sound did work and i ripped on CD in Banshee and now it does not have any sound. tried looking for a related forum question and on page 2 there is a post "11.3 Gnome, totem, banshee no sound" that followed with no success. how do i get my sound on? tried all the normal checks to make sure it was not on mute.
View 4 RepliesI did a clean install of 11.3 and everything went good but i have a problem. There is no sound when i try to watch a movie in VLC, Kaffeine, SMPlayer and xine. But when i open the movie (.avi format) with Dragon player it plays as it should be. I have sound when i test the output in KDE system settings and i listen to music as i write this message. I tried with Xine and GStreamer output but the problem stays. I have all the multimedia codecs that are needed installed. Here is my repo list:
Code:
[code]....
I am unable to capture sound from the sound card. I used to be able to do this with ease in SuSE 10.0 and 11.2. Now I have 11.4 and not only do I NOT have access to the sound card's channels (for base, treble, turning the mic on/off, and line in, Analog Capture Boost, etc) but now I can't seem to get at the settings for capturing sound coming from the sound card. I have tried using the Alsa mixer by way of the terminal and went to the Capture section and turned all of the settings all the way up. I didn't see any settings for Capture Boost as was available with 11.2's Alsa mixer GUI. Here's more of my info:
[Code]...
Isn't there ANY GUI sound mixer available that will give me access to all the channels I require? I not only record sound from my sound card, but I also use my mic at times for Skype and I like to be able to turn it off when not in use, rather than unplugging it all the time. I used to be able to do this with 11.2 and 10.0 and I really liked it that way. BTW, the plug for the mic is in the back of the computer and it's not convenient to have to plug/unplug it from there each time. For some apps, it's just a good thing to have all the sound settings done and in place before starting up the app. This I cannot do right now because of the changes to KMix and the Alsa GUI. I really really don't like this at all.
Sound should be easy. Far more easy than video, but i experience more problems with sound, than with my Nvidia GFX-card.It seems OpenSUSE use several type of sound-systems like Alsa-sound, Pulseaudio and OSS. Then its somthing called Xine and GStream that i've never heard about.I have OpenSUSE 11.3 64bits with KDE4.6.1What should i use and what can i uninstall?Now it seems i'm using PulsAudio with Xine-backend.
View 3 Replies View RelatedI have Hp Pavillion dv4-1235ee Notebook PC with windows vista.there is no sound coming from internal speakers, 3d sound blaster pro compatible sound 16 bit integrated.
View 1 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies View RelatedopenSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies View RelatedI have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
I have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies View RelatedI have a 3 monitor setup with a 9800GT and a 6800GT. The 9800GT is linked to my main monitor (20" viewsonic 1680x1050) and a 40" Toshiba 1080p LCD TV. The 6800GT powers a secondary 1280x1024 dell LCD. I have the SPDIF connector plugged into the 9800GT and in sound preferences Hardware tab I have Digital Stereo (IEC95 output selected, but I get no sound on the TV. PS All three are on separate x-screens.
View 4 Replies View RelatedIve recently switched to Ubuntu from Windows XP and me and a friend had finally got things going for me, with everything running pretty darn well. A couple days ago we decided to install VirtualBox with Windows 7 and for a day everything worked well enough but yesterday I discovered that I had no sound whatsoever on Ubuntu but oddly Win 7 on VB had audio running without any discrepancies.
View 4 Replies View RelatedWhen ever I install windows I have to manually install this [URL]Well. I downloaded wine and tried it and it said Unknown error. So, how would I go about getting my sound driver then? I really need sound I do not have anything under Hardware, Output or Input in the Sound preferences. I've already tried OSS, I think I installed ALSA but I do not know how to work it. I've downloaded a tar.bz2 pack for alsa, where is a deb. I hate configuring stuff, I want something I can click and install.
Code:
Audio
Sound Card
SigmaTel High Definition Audio CODEC
Playback Devices
Digital Output Device (S/PDIF) (SigmaTel High Definition Audio CODEC)
[code]....
Prior to the release of the update 11.04 I had sound working perfectly. When the update came out, I lost all sound. I have run through all the forums and threads and websites I can find trying to find a fix, no luck. I have no start up sound, no sound from any program. I installed PulseAudio and it shows that there should be sound, but neither speakers nor headphones have sound coming from them.
View 7 Replies View RelatedI am using mpd and ncmpcpp as a music player. Until today it worked perfectly fine but now when I play a song it begins playing but with no sound (yet sound works in every other program). I am using a creative x-fi xtreme gamer sound card.
Here are my configs:
~/.mpdconf:
Code:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
[code]....
I get no sound. Not even the little signature tune you're suppose to get when you start up ubuntu. When I go
Code:
aplay -l
I get:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
Then I tried the alsamixer just too make sure that the speakers was not muted.
Code:
alsamixer
The last thing I tried was adding my user name to the /etc/group. Before it was
Code:
audio:x:29:pulse
but now it says
Code:
audio:x:29:myusername
is where some bullet proof way to test the sound card? Now I'm running some random mp3 which might have some fault in itself. what must I do to get the sound to work?
my suse 11.2 no detected sound my asus p5kpl hda7 i am install alsa driver's not work i need
View 1 Replies View Relatedso I have vlc 1.0.4 and when I try to play .flv files they won't load and when I try to play .mp4 files they play but after 1 or 2 vidoes there is no sound at all. I can get sound form other applications such as amsn and ice weasel when it happens
View 3 Replies View RelatedMB: Gigabyte 790XTA-UD4 boards, with internal sound
4Gig Mem, Phenom II CPU, 1 TB HD
HD in: 2 pc5500 TV cards
HD Out: GeForce GT240 out,
I'm getting very frustrated, having dropped a substantial (for me) amount of money trying to get a DVR setup, and Myth TV has punished me every step of the way.At this point, the extreme frustration is that sound *was* working earlier - not going to the TV via HDMI (Which seems like it should be easy but I've yet to get it to work) but I had speakers working - right up to the instant I installed restricted extra's to run mp3's - the instant I got totem to play sound, I completely lost all sound from myth TV, even playing back digital files it has recorded have no sound now.
alsamixer seems to have been used numerous times to fix these issues, but doesn't actually show as a valid package when I check the repository - I installed the gnome version instead, but nothing I do there seems to have any effect.I'm not entirely sure if I need/should be using the patch from the pc5500 cards into the sound card line in - as near as I can tell, that's only for analog signals, and it *was* running happily without it.
As mentioned - sound is fine from everything else, but even playing a recorded file I have no sound playback (Note: I had not recorded anything I can verify *had* sound before). I've gone through various guides, and I got nuthin'. All the actual cards and hardware have every appearance of working.
I am running Ubuntu 10.10 which is great but since yesterday i have not been able to get a sound out of the speakers?
View 3 Replies View RelatedI have a Asus EeePC 1001px with ubuntu 10.10 and I'm unable to record sound from the webcam microphone. Does anyone know how I can solve this?
View 3 Replies View RelatedAfter installing and uninstalling a couple backports modules in synaptic and reinstalling almost every alsa package, I have no sound in ubuntu after the boot chime.In my sound preferences, No hardware is listed and only "dummy output" is available under the outputs option.
View 9 Replies View RelatedI can't get any sound to come out of my laptop through Kubuntu. Please help me by giving me step by step instructions, because I'm a total noob at such things. I've went through the Comprehensive guide as well -to no avail. to sum it up:
Kubuntu 9.10
Realtek ALC880
No sound
I have an external USB Sound Card (Audiophile Fubar II DAC) that worked flawlessy up to one or two months ago when suddenly it stopped to make any sound. The card, speakers, etc. are working, I tried it from another OS running on the very same PC. The card is detected, but it's dumb
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
[code]....
The card appears under System->Preferences->Sound->Hardware but there are two unusual things (if I remember correctly). 1. The green sound card icon on the left is not shown, it's not gray, there is nothing (but the USB Headset, that works well, doesn't have the icon either so maybe it'ok).
2. From the Profiles dropdown I can only choose from four options (off, analog mono, analog stereo and digital duplex). Before there were more (digital output only, etc.).I checked the levels several times. Another external USB card (SB Xi-Fi 5.1) works well.
I tried to OSS workaround to get sound running but instead my sound card disappeared totally from the system. I restored ALSA (I think) but my sound card is still missing in action. If I could get some help on how to restore that I think I could figure the rest out. I tried the sound problem sticky but I ran into the part where the poster has no solution as well. Any assistance is greatly appreciated and I'm slowly learning how the terminal works.....pretty much what windows does for you but it's more flexible at the same time. I learned on DOS so it's not totally alien....just different commands.
I also found Realtek drivers for the HL 272 which is my sound card for linux but I can't make heads or tails of the instructions to install.....