I am running 11.4_64bit/KDE4.7.I decided to clean up a bit and ran mmcheck V235.I have two differences from the mmcheck results that I believe are OK:libdvdcss2 now appears in packman, which I assume is good as wellStep 4
Code:
4 . Show the libdvd* Packages are Installed for DVD Movies ...
Command: rpm --query --all --queryformat '%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH} -> %{VENDOR}
[code]....
I start this thread just to say publicly thanks to jdmcdaniel3 for his script mmcheck. It's very useful, and very well explained. As his thread is closed, I needed to start a new one. I would even suggest to make it a sticky.
View 7 Replies View RelatedI'he just arrived in Linux openSuse 11.3. Wy camera is not recognized by the system and i'm not able to see my photos: how can I do?
View 7 Replies View RelatedWhen I insert a DVD movie, it won;t show up to play. I can't see it when I click on the My Computer icon, and it doesn't show up in the device notifier. I have tried a couple of different DVD's and a couple of different OpenSuse 11.4 computers. This would leave me to believe that it is a setting issue that I am missing. I have never had this issue before with other OpenSuse versions. All I had to do was install all the codecs required and voila!
View 9 Replies View RelatedI have install the openSUSE 11.2. During install several error messages were shown. "I/O error" and "Error 2". The operating system works normally but icons of files and toolbar buttons are not shown. What should I do?
View 5 Replies View RelatedI have an Nvidia GT9600 card and want to load the Nvidia drivers. As per the 1 click install I set nomodeset and installed the drivers from 1 click. On reboot, well there was'nt a reboot just got a blank monitor, no BIOS screen, nothing. After stuffing around with my system for about 1 hour clearing CMOS and unplugging and re-plugging just about everything I managed to get my system back.I do not like the New Neuoveaux (or however you spell it) Graphics drivers, get some wierd artifacts on my monitor?
View 3 Replies View RelatedOnce in a while I stumble on this (after I install something which probably conflicts). I was able with the sticky notes to correct the problem few times but this time is a bit more complicated at least for me.What is strange is that I cannot find the ALSA-Configuration.txt in my system.
View 9 Replies View Relatedwhen trying to install bibblelite-4.10.1-1.i386.rpm on my brandnew openSUSE 11.2 system I get
error: Failed dependencies:
libstdc++.so.5 is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(CXXABI_1.2) is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(GLIBCPP_3.2) is needed by bibblelite-4.10.1-1.i386
libstdc++.so.5(GLIBCPP_3.2.2) is needed by bibblelite-4.10.1-1.i386
Is there a general problem with Bibblelite on 11.2 or shall just install the packages listed in the error message? Where do I find libstdc++.so.5 for 11.2
System tray with clock just moved to left, where quick start panel is and I cant see opened windows.
View 2 Replies View RelatedUpgraded from v11 to 11.3Now when I'm using my voip application and open a ..... video the sound from both applications mixes. It seems also that I have less kmix control.
View 9 Replies View RelatedHow to make win32 codecs (package w32codec-all) work on 64 bit system? Simple install of "w32codec-all" package doesn't help. I tried to compile mplayer from sources. After finishing configure, the script returned that win32 codes will be unavailable because of 64-bit system.I need to view some avi-files coded in Intel Indeo 4. As I understand, this codec exists only in win32 codecs.
View 9 Replies View RelatedMy sound was working fine except I couldn't get system sounds (notifications) to work. So I decided to install pulseaudio to see if it would fix it. Now I get system sounds and my other sounds, but now in most things (such as firefox and warcraft 3) the sound is choppy. I've tried SDB:AudioTroubleshooting - openSUSE and a couple other things I've googled but it's not working for me. I'd like to be able to fix it or at least go back to the way it was.
View 5 Replies View RelatedI am attempting to set up a machine to use as a movie/video viewer. When I connect this machine using an HDMI cable to an HDMI TV, I get video, but no audio. No beeps, no system sounds, no noise of any kind.
I've run the following mixers and set all volume controls to maximum:Gmixer, Kmix, AlsaMixer and pavucontrol.
When playing a video, pavucontrol meter shows signal from the application and shows output signal to the HDMI device, but where that output is going to is beyond me.
Using the Sound setup of Yast, I attempt to play a test sound on the HDMI, nothing.
Built in Audio adapter works fine. I have disabled it in pavucontrol in attempts to get the sound directed to the HDMI output, but, silence is all I get. I've also tried enabling and disabling simultaneous output with no difference in results.
I've tried a few suggestions from other posts with the same issue (creating /etc/asoundrc.conf, modifying /etc/pulse/default.pa), but no joy.
If I boot up that other operating system (starts with a W), all sounds (system & video) show up on the HDMI input with no adjustments needed.
Why must this be so difficult?
The technical details:
Suse 11.4
EVGA GeForce 8400GS Video card (HDMI)
All commands below were issued while HDMI cable connected, and video playing (using VLC).
Output of alsa-info.sh: [url]
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
My problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
openSUSE 11.3 64-bit fully updated, running the latest K3B, 2.0.1. from the Packman repos with the codecs installed. Sometimes it starts up and runs fine, others the splash and then nothing. And again other times it will start and never show up until I reboot and then there it is. When I go to system monitor it will show under CPU% "disk sleep" if that helps. FWIW I have similar issues with Nero 4. I've added myself to the cd rom group and all of that.
View 5 Replies View RelatedIv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies View RelatedI recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
Happens on Jessie AMD64 with mate, I can't go to a tty to kill mate system monitor, mouse stop working, keyboard stop working. I tried changing the theme, and now it freeze opening mate system monitor.
View 0 Replies View RelatedI'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View Relatedwe have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedCan itunes be setup to run on a opensuse 11.3 system ? I've been trying to setup itunes 10 with no luck at all.
View 2 Replies View RelatedI tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)