OpenSUSE Multimedia :: Applications Recognize Gnome Shortcuts For Multimedia Keys?
Jan 8, 2011
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
View 4 Replies
ADVERTISEMENT
Mar 17, 2010
I have recently added a new keyboard layout - international U.S with dead keys - so I can type accentes and so in spanish. Ever since that gnome-terminal doesn't recognize the shortcuts keys like <ctrl>r or <ctrl>c and I get my other language charecters instead. thats happen with any keyboard layout I swith to. Furthermore, <alt><ctrl>+F1...F9 doesn't work either.
View 5 Replies
View Related
Jan 10, 2011
I use gnome-mplayer 1.0.0 and Totem Movie Player 2.30.2 to view videos Both read subtitles well from srt files. But both are not able to read {a6} command in the srt files.
NOTE:- {a6} command serves the purpose of putting the subtitles on top of the screen, making it possible for subbers to display lyrics/additional footnotes on top, while at the same time, having the dialogues to show in their usual position.
Is there are way to force either of them to read the special commands properly?
View 9 Replies
View Related
May 26, 2011
Surviving without mouse or touchpad I have been looking for this without initial success: only 2 oldie questions like the one I was going to place:
[URL]... But I found it!!: [URL]...
So the key keyboard shortcut is:
CTRL+ALT+TAB
With it you change the focus from the desktop to the panel, and vice versa When the focus in in the panel you can move from icon to icon with TAB (to the right) or SHIFT+TAB (to the left). Then Enter key (sometimes F10 instead) makes the same as left-clicking with the mouse, and SHIFT+F10 makes the same as right-clicking with the mouse. ESC key (sometimes Enter instead) takes the menus out.
There is something about this in: [URL]...
View 2 Replies
View Related
Jan 4, 2010
Is it possible to have gnome's display settings recognise higher refresh rates than 56hz, as my nvidia is set to 85hz, but gnome display still thinks its 56hz, and I believe this is causing many programs I'm using to refresh at 56hz. Compiz works beautifully after overriding the refresh rate inside it, as it too thought I was using 56hz instead of 85 but many games aswell as CairoDock as jerky, which makes me think it is a refresh issue.
How can I make gnome know I'm using 85hz?
View 5 Replies
View Related
Aug 14, 2010
i have 2 boxes w/ squeeze/gnome. my home one has bigger HDDs (to me anyway), so i can install/trick out for days. my work box however, has a single paltry 12Gb HDD (and no, i can't afford to run out and buy a bigger one).my question is this: can i slim down my gnome install my removing what are to me at work, non-essential apps (evolution, totem, etc)? if you try to remove any of these in synaptic, it says it will ALSO remove gnome altogether.
View 7 Replies
View Related
Dec 31, 2015
I have did a clean installation of Debian Jessie today on my laptop and my computer.I use the Gnome 3.14.1 Desktop environment.
I installed Spotify-Client via PPA, and i installed the gconf-editor, gufw and Google Earth. Those 3 applications are not visable in the Gnome applications menu.
If i run then via the terminal, e.g. spotify-client, gconf-editor, gufw and google-earth, the applications are started. They seem to be installed correctly. I tried either running apt-get purge spotify-client gconf-editor google-earth-stable gufw, and reinstalled those applications, to no avail.
I even tried installing another desktop environment, mate-desktop. The shortcuts to the applications do exist in /usr/share/applications. Only not in the Gnome 3 menu. It's strange, because this problem happens both on my desktop and my laptop computer.
I run:
Debian Jessie 8.2.0 with Gnome 3.14.1.
Kernel 3.16.0-4
amd64 architecture
I also tried reinstalling Gnome-Shell and GDM. But it doesn't work.
Before, Debian Wheezy 7.9 was installed, and there was no problem. My Debian installation is fully up-to-date.
View 9 Replies
View Related
Jun 23, 2011
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
View 1 Replies
View Related
Jan 28, 2010
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
View 3 Replies
View Related
Sep 25, 2010
I used YAST to set my keyboard layout to Belgium AZERTY. But my '{}@' keys dont work. [ALT]+[CTRL]....
View 3 Replies
View Related
Mar 19, 2010
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies
View Related
Nov 26, 2009
banshee seems unable to recognize and mount ipods. once connected they are seen by nautilus (and songbird) but not banshee..
View 4 Replies
View Related
Jul 20, 2010
My K3B doesn't seem to recognise a blank CD in the drive tray.
I'm on OS 11.2, K3B & codecs from 11.2 packman, and 11.2 KDE4 factory (ie kde4.4).
When I put a blank cd in, the kde4 device notifier shows me a blank cd and offers to create a project with k3b. I create a data project & click burn, the burn dialog has a greyed out Burn button, and the media selector dropdown says please insert an empty or appendable medium.
If I eject & re-insert the disc at this point, the device notifier again tells me I've inserted a blank cd, k3b's dialog freezes for a second (seems to notice something has happened) but still does not list my cd and remains as it was before.
k3bsetup reports no problems. Burning from commandline (cdrecord) works fine. Dolphin also knows about the blank cd. I've burned to these discs before with no problems (K3B used to work quite recently, perhaps 4 or 5 weeks ago). Updates have been applied in the meantime.
View 9 Replies
View Related
Nov 14, 2010
Do you know any dvd playback app that can recognize inputs from a remote control (like play, pause e.t.c) and at the same time when I launch it to check the dvd rom and resume playback from last time. I used vlc but it does not seem that works like the way I do.
View 3 Replies
View Related
Mar 5, 2011
I have Timidity++ 2.12.0 in Windows and a Soundfont customized by myself named Collection.sf2. everything I had to write in Timidity.cfg file was:
dir ctimidity
dir ctimiditysndfont
soundfont Collection.sf2
And just with that Timidity recognizes all presets in all banks of my soundfont. (This soundfont has more than 600 presets in more than 30 different banks.) I tried Timidity++ 2.13 for Windows with the same soudnfont and cfg file and it didn't work. 2.13 version recognized only the 127 presets of the first bank. so I went back to 2.12.0 version. The same now happens when I installed Timidity in Opensuse. etc/timidity.cfg file points to /usr/share/timidity/timidity.cfg file. In this last file I wrote the following:
dir /home/fernando/Soundfonts
soundfont Collection.sf2
I connected Rosegarden to Timidity and tried presets from several banks that use to be recognized automatically when I connect Rosegarden to Qsynth. But in Timidity no matter what bank I choose the sound comes only from the presets of the first bank. I tried the same connecting vkybd (a virtual midi keyboard found in multimedia repo) to timidity and even if i choose bank 2, 8, 16... the sound is always from instrumens of bank 0. it seems that Timidity 2.12 was the only version that recognized bank variations automatically just like Qsynth does. I could not succeed in this in any later version, neither in Windows nor in Linux.
View 9 Replies
View Related
Aug 12, 2010
I own a Microsoft Wireless Keyboard 1000 which I'm overall pleased with. The keyboard has some extra media and application launching keys which I try to assign in systemsettings>Input Actions. I believe the application is called khotkeys, however I'm not sure. Four different cases occurred as follows: The keys are recognized and can be assigned a command to run. When settings are saved the specified application launches. Examples of keys that works:
Code:
Physical key symbol : Recognized by khotkeys as : HEX code send by keyboard (obtained by showkeys)
Headphones : Tools : keycode 171 press, keycode 171 release
House : Home Page : keycode 172 press, keycode 172 release
All media keys (play/pause, next, prev, stop, vol-up, vol-down & mute)
[Code].....
View 1 Replies
View Related
Aug 18, 2011
I'm sure this is a painfully naive question, but I don't suppose it can possibly lower my reputationFor Good Reasons,use a custom build of the audio editor audacity rather than the version in the openSUSErepositories. What I can't seem to figure out is how to get it to find and load the LADSPA signal processing plug-ins. I have the regulation ladspa libraries (1.13-6.2) from the Oss repository installed. The files reside at /usr/lib64/ladspa . audacity is built with ladpsa support enabled, and indeed reports that it is enabled if I look at the Effects tab under preferences. I have even entered the ladspa library path in a "ladspa.conf" file under /etc/ld/so.conf.d, which may or may not help. Regardless, I don't seem to see the ladpsa effects listed when I run audacity
View 8 Replies
View Related
Mar 13, 2011
I recently upgraded to 11.4, but skype seems to mute all other application streams when a call is active. I can manually unmute them, but it is rather annoying especially when listening to music in the background using Amarok since everytime a new track starts it creates a new stream and is muted again.
I installed pavucontrol just to see if it had more options then kde's built in multimedia settings, but it doesn't (just has the cool how loud is the volume currently). I like the individual application (stream) volumes.
View 1 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Nov 5, 2010
With OpenSuSE 11.2, I would have a guest account running skype, and a media account running mythtv (both users logged in at the same time using switch user). I had skype on auto answer incoming calls, and I remember watching a movie when I suddenly heard my Dad's voice appear calling my name. That was cool!
Now that I'm using OpenSuSE 11.3 (both were using KDE), skype only plays audio when that user's session is active. Switching to the media account will prevent skype from starting to play any sound. Switch back, sound is normal. If I remember correctly, now the skype audio cuts out as soon as I switch user.
I also have a tv capture card which only STARTS to captures analog audio when the media session is active, mythtv being run by the user media. Once the show is started to record with sound, we can switch users and the show continue to record with sound.
The only thing that should be configured differently from the default install is that I compiled mythtv (it wasn't available as an rpm when I upgraded to 11.3, and haven't bothered to check since).
View 1 Replies
View Related
Feb 14, 2011
On the default GNOME installation, I noticed there were no option in Keyboard Shortcuts to bind keys to switch to specific workspaces (I.E. <ctrl>1 to switch to workspace 1, <ctrl>2 for workspace 2, etc).
I tried editing the entries in GNOME Configuration Editor under apps->metacity->global_keybindings, but the bindings weren't working.
how to set these? I'm somewhat new to openSUSE and Linux in general.
View 4 Replies
View Related
May 17, 2010
I'm using Ubuntu 9.10. All of a sudden several of my function keys stopped working and several keyboard shortcuts that I had setup involving function keys stopped working as well.
For example, when I go to preferences->keyboard shortcuts and try to set "Toggle fullscreen mode" to Alt+F11, the text "XF86AudioRaiseVolume" appears where it should just say "Alt+F11". Pressing Alt+F11 does nothing.
All of my function keys somehow got mapped to XF86AudioBlahBlah and no longer work. How do I undo this? I recently installed ffmpeg and gtk-recordmydesktop but I don't think I installed anything else.
View 1 Replies
View Related
Jun 5, 2011
Is there any way to disable shortcut keys in XFCE Terminal ? I can't seem to bind the shortcut keys, and F1 especially really gets in the way for some programs. Have no clue who thought it would be a good idea to bind F1 to a stupid help screen, when many terminal programs need this. I am using fluxbox, so maybe this has something to do with it.
View 1 Replies
View Related
Sep 18, 2010
I am using OpenSuse 11.2 + Gnome
After following the message "check your multimedia problem in ten steps", I still have no sound.code...
View 3 Replies
View Related
Aug 29, 2011
i have openssuse 11.4 installed kde 4.6.0.0 when i search on yast online updates for vlc i get three options vlc-gnome or vlc-qt or vlc-nox which one goes with opensuse kde
difference between gnome vs qt?
View 6 Replies
View Related
Dec 18, 2010
I installed a new login theme and I noticed that my shortcuts for changing workspaces don't work anymore. When I went to my keyboard shortcuts menu I found a completely different list of shortcuts, so I believe that I'm using a different Windows Manager than I've been using since installing Debian.
Guess I was wrong, I went into gconf-editor, went to metacity's keyboard shortcuts, and found mine disabled. I set them up again there and now they work again, even though they don't show up in the Keyboard Shortcuts menu.
View 1 Replies
View Related
Apr 4, 2011
More specifically, I am referring to the arrow (forward and rewind) keys. When I press them to rewind, it jumps back 15 seconds. I would like to change this so that pressing the arrow keys make it jump just five seconds forward and backwards.
View 3 Replies
View Related
Nov 14, 2009
I normally run KDE, but installed GNOME as well on my netbook (running openSUSE 11.2) to try out. However, I noticed there is no longer any volume control applet. The GNOME panel control is labeled 'deprecated', and the volue Fn keys, which work fine in KDE, do not work at all. I tried launching the PulseAudio Volume Control app, but it gives me a "Connection Failed: Connection Refused error". I still have sound, and I can adjust the volumes in alsamixer, but is rather inconvinient. What is the "right way" to adjust volumes in 11.2's GNOME?
View 9 Replies
View Related
Dec 12, 2009
i have a fresh installation of opensuse 11.2 32-bit. my soundcard is terratec ewx 24-96. the card is detected in yast, and i can play test sound from the yast/sound panel. all volume sliders are set to maximum values (i have also double checked it in alsamixer).
i *can* hear the sound when doing this test from the gnome terminal:
speaker-test -dplug:front -c2 -l5 -twav
however to make this test work:
speaker-test -c2 -l5 -twav
i had to remove the asound-pulse.conf file. after removing this file the second test (speaker-test -c2 -l5 -twav) works. removing this file also solved the problem of missing sound in videos videos played in firefox. the original contents of the asound-pulse.conf file was:
pcm.pulse {
type pulse
}
ctl.pulse {
[code]....
the problem is i can't play any audio files (.wav or .mp3) in banshee.
i am sure the .wav file i use while testing is ok as i can play it with aplay.
when i try playing the .wav file, banshee does not complain about any missing codecs. the slider moves as the file is being played. i have also started banshee with the --debug option, but there were no errors in the output.
so my guess is that banshee is playing the files, it's just that it sends the data to the wrong device/channell or whatever it is.
all of the gstreamer packages i have installed are from the packman repository.
when i run gstreamer-properties, the only setting on the audio tab that gives me sound is: alsa (for the plugin) and default (for the device).
View 2 Replies
View Related
May 23, 2010
I'm having issues getting VLC to work again (openSuSE 11.2 GNOME). It used to work fine, but I think I broke its ability to use Qt when I was attempting to upgrade it and install some dev tools for something I wanted to try. When I run VLC, I get these errors:
[0x81b3090] main generic error: no dialogs provider module matched "any"
[0x806f758] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0x806f758] skins2 interface: skin: subX author: Martin Poehlmann
From what I can tell, the Qt4 plugin is in the correct location (/usr/lib/vlc/gui/libqt4_plugin.so), so I'm not sure what's causing it to fail. As far as I can tell, it's some conflict among Qt packages between existing ones and ones that I tried to upgrade. Is there a way to get a list of all qt packages that come installed by default and their versions so I can attempt to revert back to it?
View 7 Replies
View Related
