I start this thread just to say publicly thanks to jdmcdaniel3 for his script mmcheck. It's very useful, and very well explained. As his thread is closed, I needed to start a new one. I would even suggest to make it a sticky.
View 7 RepliesI am running 11.4_64bit/KDE4.7.I decided to clean up a bit and ran mmcheck V235.I have two differences from the mmcheck results that I believe are OK:libdvdcss2 now appears in packman, which I assume is good as wellStep 4
Code:
4 . Show the libdvd* Packages are Installed for DVD Movies ...
Command: rpm --query --all --queryformat '%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH} -> %{VENDOR}
[code]....
I have been working and searching the forum for a solution to dvds not playing on my hp dv2000 laptop running openSUSE 11.2, 2.6.31.12-0.2-desktopHere are the post ask for in the ten step process. (lots of them)
#1 Check if there are missing dependencies
#1 LC_ALL=C zypper ve
linux-jh3c:/home/carl/11.2Setup/dvd # LC_ALL=C zypper ve
[code]...
I ran across this command the other day, and found it useful for a quick check to see if your webcam is working. If you have a webcam and have mplayer and mencoder installed just open a terminal and type:
Code:
And it should open a window with you webcam running. I would think it would work with any webcam. Just for the record, I am running on a Dell Inspiron 1521 laptop with a build-in cam. You can find this in mplayer man pages, but there are 191 pages even if you send the man pages to a text file. mplayer is a very powerful program and there are many more things you can do with it.
Anyone know a way to check if flash is running? From command line or script.
I've tried
Code:
But it also gives output if flash is blocked(by flashblock in firefox).
I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
I am trying to write a script to turn my HTPC off automatically and turn it back on again at a specified interval.
I've got the turn on off bit sorted using /sys/class/rtc/rtc0/wakealarm but I want the script to not turn the machine off if say something is downloading, I am currently watching something etc and i dont think I will have any trouble with that.
But what I would really like to be able to do is tell if my TV is currently on. I dont think anything x11 related would work here and this may not even be possible. Does Ubuntu "know" if it's display device is powered on or not? if so can I interrogate this somehow?
My DVD/CD burner is rather old now (going on 5 years), and I've had some "quality" issues when I've been burning stuff for the past year.
CD's: When I play a burned CD in my car stereo, the songs have a "skipping" sound to them on the low-volume levels of the audio. I use K3b as my burning software, and it seems to be the best, but am I wrong? Is this a common problem?
DVD's: Specifically video DVD's. After converting the .avi to an image file using DeVeDe Creator, it gives me a file that has the .iso and I burn the disc using K3b. It's really hit or miss.
The question: is there a way to test the performance of my DVD burner to make sure it's working properly? Is there a way to calibrate the mechanism? I have a new External DVD/CD burner that supports "LiteScribe" (I could be mistaken on the name, but it's a technology that allows you to create a picture on the opposite side of the disc), but my INTERNAL is a 5 year old Lite-On.
is there a way to "repair" or check the integrity of ogg files? They all work on my desktop but some seem broken on my mobile (Nexus One). I have the feeling my converter may have corrupted some files or the conversion was corrupted by the original file.
View 3 Replies View RelatedWhen trying to access "Multimedia" from System Settings, I get an error message as follows:
Code:
Cannot load library /usr/lib/kde4/kcm_phonon.so:(/usr/lib/kde4/kcm_phonon.so undefined symbol: _ZN6Phonon12GlobalConfig28setAudioCaptureDeviceListForENS_8CategoryE5QListiE)Cannot load library /usr/lib/kde4/kcm_phonon.so:(/usr/lib/kde4/kcm_phonon.so undefined symbol: _ZN6Phonon12GlobalConfig28setAudioCaptureDeviceListForENS_8CategoryE5QListiE)
Possible Reasons:
* An error occurred during your last KDE upgrade leaving an orphaned control module
* You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager. And then when I click OK, it closes, and that's it. how to prevent this, so I can access the multimedia settings and change them. The reason I want to see the settings, is because Amarok 2.3 won't play any songs (even though version 1.4 still works).
Normally I find everything I need either in the documentation or forum, but it's been months, and this time I'm stumped. I'm posting the results of my latest tests, so I'm really sorry about the length of this post.
I can't play DVDs unless they've been burned by myself or a friend. I had no problems until around the beginning of April. I was running 11.2 on both my laptop and desktop. I think an update changed something. This was before 11.2 was officially retired a week or so later. I wanted to upgrade to 11.4 anyway, so I began with my laptop. During installation I wiped everything from my hard disk by creating new partitions and formatting them. After installation I installed the multimedia packages using one-click (opensuse-guide.org, not opensuse-community.org, although I did read what they said). I know one-click is not ideal, but I was curious. The result was that I still couldn't play DVDs.
I did a fresh installation, just to be on the safe side. This time I installed the packages according to Multi-media and Restricted Format Installation Guide by caf4926. But I still couldn't play DVDs, so I went through the thread Check your multimedia problem in ten steps. Then I ran mmcheck (v2.35). I tried a few times, experimented, and in the end did another fresh install.
In the meantime, on my desktop, which still has 11.2 on it, I found the file which had been changed and changed it back, so I could play DVDs on it again. It was in /etc/udev/rules.d/, 70-persistent-cd.rules. This does not appear to be the problem in 11.4 on my laptop.
I have again installed the packages according to the multimedia installation guide, and done the ten-step check and run mmcheck and these are the results as they stand:
I couldn't find a package called mplayerplug-in. I used zypper to look for it.
I tried installing the totem packages in a previous installation, but they didn't make a difference, so I left them out this time.
I deinstalled my jdk, but it doesn't seem to have made a difference, except that I get an error notification everytime I want to use LibreOffice. And I need it, so I'm putting it back soon.
So, these are my packages:
And this is what happens when I try to play a DVD using Kaffeine (since I don't an error message except from Kaffeine, and I've forgotten where my logs are):
And then comes Read error from: Error reading from DVD over the GUI.
And nothing else happens... I get no feedback from smplayer whatsoever. It opens, trys to read the DVD, and sits there. Even on the console.
I have a GeForce 8600M GS card in a Dell Vostro 1710, which has appeared to be playing up lately, but I'm unsure whether it's the hardware itself or have I not properly set things up.
I have Ubuntu 10.04 installed with compiz, and 'rotate cube' enabled. The 'deformation' is set to cylinder. I recently tried using rss-glx (really slick screensaver) when the slow-down and screen freezes happened.
The symptoms:
Odd behaviour begins after attempting to log in after the screensaver has blanked the screen, i.e. screensaver ran for a while then the screen blanked. When logged back in, a 'cylinder' rotate freezes and the screen does not refresh. Clicking around the screen refreshes it somewhat. Switching between screens becomes next to impossible and a restart is required.
In general rotating the cube is OK, rotating the cylinder seems a task on the video card and rotating the sphere is horribly slow.
Things done so far:
Each time I log in, I need to open the NVidia settings and change the powermizer to 'prefer maximum performance'. On next reboot I will try this in xorg.conf code...
My questions are:
- How can I verify the card is working correctly, enough to be able to decide whether it's hardware or software at fault?
- If the hardware is proven to be OK, what am I then leaving out?
Is their any software in Linux which tells about audio sound quality (frequency,bits/s etc...?
which is special designed for all Audio_quality-features. Moreover, I have tried Themonospot software but its only for Video formats. I want soft 4 audio formats only.
i have ubuntu studio 10.04 installed and this is my second installation of the system. now that i have updated the system, got the fglrx drivers for my ATI HD5750, installed compiz-config-settings and glx-dock (aka cairo-dock). the first time i started the glx-dock, half of the dock was visible and it was distorted all over. so i ran compiz-config-settings for the first time and saw that it wasn't also working. then i tried to find a solution for a few valuable hours because it was essential to customize the feel of an OS but i think i have came to a point that i should stop trying to learn things that i see for the first time but ask and hope for the best (soon). anyway i should say that compiz and cairo dock was working the first time i installed the system. now when i run compiz-check, it gives the following output:
Code: Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Device 68be
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia) ok AIGLX doesn't start, so i check Xorg.0.log and it says: (it has loaded and initialised AIGLX but maybe i misunderstand something, anyway you should see for yourself)
Code:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=826145cb-591c-4a6e-9d6c-62fba6898f38 ro quiet splash
Build Date: 10 December 2010 05:53:04PM
[Code]....
I was using THIS guide to install restricted multimedia codecs. I got to the part where I had to switch system packages to the Packman packages. It came up with a number of dependency errors. I then had a stupid moment and told it to ignore the dependencies and break the applications. Now Xine won't even start, and Amarok seems to have disappeared on my computer. Oh and I also got a bunch of weird dependency problems when I was trying to install some of the packages from Packman too as listed on the guide. I also told it to ignore them when it couldn't find the dependencies. I'm scared I fudged multimedia up so badly I would have to do a clean install to get it back. BTW, I'm running openSUSE 11.2. I don't know if there are other specifications that matter.
View 4 Replies View Relatedi can't install multimedia codec, after installing i restart PC and then linux writes error kde4int i hadn't this error before, it begins after installing new monitor Samsung syncmaster B1940
View 9 Replies View RelatedI am trying to install missing codecs to my openSUSE 11.4.I found this.How to Install Multimedia Codecs in Linux - Softpedia.I downloaded file all-20110131.tar.bz2.There is no instructions where to download this file so i downloaded to /home/downloads.Before i use this i have a question - is this install all required codecs?I need codecs to play mkv, mp4, H264(x264), avi, no DVD
View 4 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
Has anyone ever successfully installed sabnzbd on opensuse? It works great on Ubuntu and is easy to install, but on opensuse, I can't figure it out.
View 4 Replies View RelatedSomehow I cannot get sound on my newly installed opensuse 11.3, KDE 64 bit..I tried the sound panel and it looks allright. I also followed the multimedia guide an installed packman repositiry and vlc, - i might have done it wrong?
View 9 Replies View RelatedUbuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies View RelatedHow to install Multimedia Codecs under Lenny with Gnome?
View 3 Replies View RelatedUsing Debian stable. 64-Bit. I can play videos and music using Totem and VLC. And I can play audio files with audacious and Rhythmbox. And I can play flash in firefox and google-chrome. But, if I open audacious and then play a flash file in Firefox or google-chrome audacious crashes as well as other multimedia players that I have open such as Totem, VLC and/or Ryhthmbox.
Would like to know if you can offer some troubleshooting steps to take so that I can play a flash file in a browser and still play an mp3 file in the audio player without having to kill those processes and restart.
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
View 3 Replies View Relatedso i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
I bought an iPod classic and am currently looking for alternatives to replace iTunes on openSUSE. As far as I understand the following are to be considered: Amarok, Banshee, Floola, gtkpod and Yamipod.
View 3 Replies View RelatedI want to stream .avi *divx/xvid* (because of the nice compression and quality) online and have all streams accessible through a web based library type thing. Something like Jinzora ( http://en.jinzora.com/ ) is what I am looking for, but it's buggy. I would even be satisfied with a web based library of streams that you click and open with an external program. I have searched a lot for this and the only thing I found that can do this how I want (if it worked right) was jinzora. I don't want to convert to mpeg4 or flv because of size and quality issues.
View 5 Replies View Related