I was doing a kernel update and can no longer boot into 11.3. I am dual booting with XP. I get Grub screen but no longer see Suse as a boot option, only Windows. I have tried to reinstall, but for some reason I can't get it to boot with DVD. So, is there a way that I can repair my computer without doing a reinstall?
View 9 Repliesdefault in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
Recently i add a lot of repositories for new apps but do0ing a zypper up after that left left many things broken ,first the my system has added 2 more entries in grub menu namely, opensuse 11.3 desktop-2.6.34.7 and opensuse 11.3 desktop-2.6.34.7-(failsafe) why are these added and now when I simply boot opensuse11.3 from menu though it starts but has no sound and typical errors shown .
Firefox is broken. how could I reach a stable state now I have these repos only code...
just updated to the kernel 2.6.36.2 contained in this repository: Index of /repositories/Kernel:/stable/openSUSE_11.3 The x86_64 type. And im getting a kernel panic after about 15 minutes of machine usage. Is it an error in packaging or what?
View 9 Replies View RelatedSo I know I should have known better then to turn my updates back on after the 15 and 16 kernel updates crashed ubuntu and grub but I did anyway and once again after a new kernel gets installed I'm stuck at the grub sh prompt.
Been down the road before... tried using
linux /boot/vml....... root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
When I use the 16 or 17 kernel I get an error stating "invalid imaginary number"...
So I use the 14 kernal and enter
initrd /boot/initrd.....
boot
And it boots like it did the last time this crashed. I went to the terminal and entered
sudo apt-get install grub 2
sudo update-grub2
And then rebooted like I did last time expecting the problem to be fixed and at least be able to boot up the 14-generic. It didn't fixed this time. So now what do I do to fix grub and what do I do about having 2 unbootable kernals??
After updating to version 2.6.31-20-generic, my desktop computer with an ATi HD4850 graphics card, using the fglrx driver, now won't boot to X. It goes through the boot process and displays the splash screen, but after that there is nothing on the screen. Choosing an older kernel version from GRUB doesn't make a difference. I don't even know how to diagnose the problem properly. I can boot into recovery mode and get to the command line, however, starting x from there only leaves me with a blank screen.
so the source of the problem is that I had installed the catalyst driver from amd.com, which needs to be reinstalled with every kernel update. I didn't know this in advance, so now I'd like a way to revert back to fglrx from the repos. Sadly, the community docs only seem to cover the graphical way of doing this, which is kind of useless to me at the moment.The ATi driver docs gave me a way to uninstall the catalyst driver using only the command line. So now I've booted back into Ubuntu and selected to install the fglrx driver from System → Hardware Drivers. However, now when I boot up, I get the message: "(EE) Unable to initialize PCS database
After i updated to the kernel version 2.6.34.7-61.fc13.x86_64 my wireless stopped working!
My network card is a Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
The interface is not listet anymore under ifconfig, under the network icon i see only wired networks.
If i boot using the old kernel (2.6.34.7-56.fc13.x86_64) everything is fine.
when i run lshw -C network i can see that the driver is not loaded correctly
Code:
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
[Code]....
Ubuntu 10.10 latest kernel 2.6.35-28.49 update is broken. update just stalls when it gets to this.Quote:
Sub-process /usr/bin/dpkg returned an error code (1)...generating grub.cfg I have tried the following to no avail..Quote: sudo apt-get install -f sudo dpkg --configure -a sudo apt-get update && sudo apt-get upgrade
I have not changed any hardware.
I use Arch Linux and the kernel got upgraded, and it broke VirtualBox. It says to run "/etc/init.d/vboxdrv setup", but such a file does not exist. The Arch Wiki says "/etc/rc.d/rc.vboxdrv setup", but that doesn't exist either. What should I do?
And is it possible to write a script that runs on startup that automatically fixes VirtualBox whenever the kernel is upgraded?
I am currently working to get to a stable dual boot Win7/CentOS 5.5 configuration on a Dell Latitude E6510 with the Intel 82577LM chipset. I haven't gotten the Centrino N WiFI chipset working yet, but the Eth0 device was working just fine.However, yesterday I did a system update. I did not pay close attention, but I believe the update did mention networking, because I thought it might help me get my wireless going. Now, Eth0 fails with the message, "Determining IP information for eth0... failed; no link present. Check cable?" It does this at boot up and if we try reactivating it once the system is up. We have tried unstalling and re-installing the driver.The Window 7 boot sees the adapter and runs just fine. I was at a different site location yesterday when everything was working, but my co-workers and I can't help but think it might be related to the update yesterday, since everything worked prior to the update and Windoze 7 works fine with the adapter.
I have not been able to mount my NTFS harddrive on the CentOS side, despite installing fuse, and I don't have wireless, which makes it difficult to get access to new drivers. I also have a FAT32 partition that would be great to share between the boots for passing info, but I haven't found a way to mount a FAT32 partition in CentOS.
The kernel-PAE-2.6.30.5-43 upgrade will not boot on my Dell 1545 notebook. The initialization stops and the systems freezes right at the point that the login prompt should appear. I do not have invidia drivers. I have Intel video drivers. Also there is a loud 'pop' in the sound system early in the initialization sequence. For the time being, I have removed the 2.6.30.5-43 upgrade via yum.
View 8 Replies View RelatedI just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko
i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format
I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?
I installed the new 2.6.34.4-0.1 security update earlier today. Now, the login screen no longer responds to my keyboard. In particular, I cannot type my password to log in. If I reboot into failsafe mode, the keyboard works and I can log in.
I'm running 11.3 on a white MacBook 4,1.
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf:
Code:
Section "Device"
BoardName "ATI Radeon HD 3200 Graphics"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "true"
Option "Capabilities" "0x00000000"
Option "OpenGLOverlay" "off"
Option "FSAAScale" "0"
Option "FSAAEnable" "off"
Option "VideoOverlay" "on"
Screen 0
VendorName "ATI"
Rolling back to kernel 2.6.27.37 fixed the problem.
After the lastest update 11.2 also suffers from the problem already reported here for 11.3. I am lucky to have two linux partitions and was actualy able to boot into the second partition. From this second system I could repair this or at least a quick-n-dirty fallback to be able to boot.
1. Copied the 2.6.21.12-0.2 version for initrd and vmlinuz from /boot to /first_partition/boot
2. Copied the /first_partition/boot/grub/menu.lst.old to /first_partition/boot/grub/menu.lst to reset to the old menu.
After boot the system could start but modules were not loaded.
3. copied /lib/modules/2.6.31.12-0.2-desktop from the second partition to the first.
4. The same for /usr/src/linux-2.6.31.12-0.2*
Now my system will boot and start modules such as network and sound. Still, was this correct? I don't know for sure if there are some issues that I haven't discovered yet. And obviously, what will happen with future updates (either kernel or other)?
I'm trying to figure out how to update the kernel in 11.4 from the repository. I have the stable repo added, but i'm not sure how to get it updated.
View 9 Replies View RelatedI have several xen virtual machines but the issue is occurring only on the one of them. Sometimes (4 times per month) the server hung. I can ping this server on the network but I am not able to login to server using local console or ssh session.
[Code]...
I sounds like the issue is caused by some Java application. But I am not sure is this message is related to root cause or the Java is impacted as a result of issue.
Could you help me with this? I need more details regarding error message described below and I also need to identify the root cause and resolve the issue. Is there any way how to determine which Java application is causing this issue?
After upgrading kernel, system (AMD 780G)refuses to start in graphic mode. Computer services running fine, but there's nothing or some trash on screen when X started. And no way how to get out except restarting or shutting down from remote computer.
Reinstalling, unistalling ATI driver doesn't help. Also manipulations with xorg.conf (install, safe etc previous file versions)doesn't help.
Sax2 detects videocard correctly, but result is same regardless which resolution@Hz is specified.
In logfiles I just can find this
Jan 19 04:12:55 www kdm_config[4226]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 19 04:12:55 www kdm[4225]: X server died during startup
Jan 19 04:12:55 www kdm[4225]: X server for display :0 cannot be started, session disabled
the normal auto updater ran and installed a new kernel for security vulnerability and it was a .pae version. So after restart I now have 4 options on the boot screen, which includes the normal "SUSE" and a 'SUSE pae" version. defaulted to the new pae version and booted up. I got the video definition not found and had to enter a value manually. The system comes up but not into x system. It gives me a login prompt and startx yields a "terminal not found." Ran SaX2 and startx now works. Unfortunately my KDE desktop is messed up now. There are none of the normal "taskbar" at boot up started processes there. So what should I have done? how do I get my system back to normal and roll out the new kernel and all these changes?
View 6 Replies View RelatedSince the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies View RelatedI updated the Kernel to 2.6.34.4-0.1-desktop. First problem was in order to do that I had to uninstall ndiswrapper. Now I have multiple entries in the bootloader, the default, the desktop, and the openSUSE 11.3 -2.6.34-12. Since I am new to linux what am I suppose to do with all those entries?
View 9 Replies View RelatedAfter reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback)
2. sound card driver is missing (nVidia MCP79)
3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
View 9 Replies View RelatedHere's what to do right after applying the latest kernel security patch (2.6.34.7-0.4) to get the ATI driver back to work. Do not reboot yet make sure the update installed the headers and sources for kernel 2.6.34.7-0.4: rpm -qa | grep 2.6.34.7-0.4 should print the files in red on a 64bit system:
[Code]....
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies View RelatedThis is just a nit, but I have noticed that whenever the kernel is updated, the background picture that I have set up for the login screen seems to be reset to "default_blue". No other setting seems to be disturbed.
After each update, I have to go into Configure Desktop->Login manager and set my background picture again. Why is this happening? Is there a way to fix this?
I am running Suse 11.3, KDE v4.4.4.
I am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
Recently I did a kernel update (compiling it manually with help of SuSE Automatic Kernel Compiler). Everything works fine and I am happy with my own settings, however there is one thing that I would to enable. On the stock kernel there is a openSUSE bootsplash on startup and a nice looking openSUSE background image in console mode. On my newly compiled kernel there is no such a eyecandies. My question is: How to enable them on my own compiled 2.6.38 kernel?
P.S In the attachment you can see what i mean with that background image in console mode, so you get my point. This is the image found on the internet, my system is openSUSE 11.4 (64 bit)