Fedora Hardware :: Detecting NTFS Partitions In 13?
Dec 3, 2010
My computer has 2 O.S.- WindowsXP and Fedora13, and also two 500GB Hard Disks. For HD1 Partition1 is NTFS, a few FAT partitions and last one is Fedora13. HD2 has 2 NTFS of equal size. Fedora13 always showed NTFS partitions on HD1 as 30GB HD, FAT partitions correctly and HD2 as a single 500GB HD with the contents of 1st partition of this HD i.e. contents of 2nd partition of HD2 were never shown in Fedora13. XP showed everything correctly. Recently XP is becoming hung on start up as 2nd HD is connected. But Fedora is showing as previousPl. suggest me the solution as I have a lot data on the 2nd partition of HD 2.
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
I've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:
[code]....
I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.
I know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.
I've been running ubuntu 9.10 until this week without any problems. I've just done an in-place update to 10.04 and now cannot boot my windows XP partition.
looking at grub.cfg it appears to be referring to sdb1 as the XP partition whereas the disk utility says the correct partition is sdb5.
sdb1 is a data partition formatted ntfs but not bootable.
When I choose XP from the grub menu all I get is a black screen with a flashing cursor at the top, which would suggest it is trying to boot the data partition.
I've tried update-grub and also startupmanager and it makes no difference. I would just try to edit grub.cfg but the next update would presumably wipe out my changes.
I bought the new harddisk so was doing a fresh install of ubuntu (Already installed win7)
But ubuntu setup is not detecting the partitions correctly it is showing 4 partitions but I have 5 (and +1 which is created by win7 of 100mb for system usage)
Setup is showing total 4 partitions and clubing all the partitions together and showing as 785gb and one partition is not detected at all and the other 3 partitions only one is correct 100mb win7 system usage partition.
I have 4 partitions ntfs and 1 partitions exFat, I had created exFat hoping ubuntu setup will detect it as different partition but that is not shown in partitions selection menu.
I have just managed to install OpenSuSE 11.3.When I try to access a NTFS partition (holding my .MP3s) I get the error message.There is no application installed that can open files of the type block device (inode/blockdevice).Do you want to install one? Attempting to install one doesn't seem to lead anywhere othe than the same sequence. I used to be able to read NTFS partitions with 11.2 - what has changed?
I am using jaunty. I have it installed in a 80 GB ext3 HDD. (This is sdb) I have another 500 GB. Its NTFS. (This is sda) It has 3 partitions. Download, Movies, Dump. They are probably sda1, sda2 and sda3 respectively. Few days ago when I was using intrepid, all three partitions were showing in the Places menu. But I was being able to mount Movies and Dump. Not the Download one. It was continuously saying 'unable to mount'. Now, after fresh installation of jaunty (not upgraded from intrepid) only Download partition is showing in the Places menu. There is no option for the other two partitions.
until recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code: Mountall mount /media/win7 [1089] terminated with status 21 My fstab has not changed but here it is: Code: /dev/fd0 /media/floppy0 vfat noauto 0 0 UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
Using: Debian Lenny. I want to mount 2 NTFS partitions in my /etc/fstab file, so that I needn't manually mount them when I want to use them. One of the partitions is the primary partition on the same hard disk as my Debian /, /home, and /swap partitions. The other is a 2nd internal hard disk.
a) Should I use ntfs-3g instead of ntfs as the /etc/fstab filesystem? I want to be able to read and write to the partitions as a user and not just as root.
b) I have read on the forum that "mounting NTFS partitions through fstab is not a great idea" - I thought that any dangers of doing so were ancient history. Why would it not be a good idea?
c) Which options should I use?
d) If I use 'user' instead of 'users' so that one specific user (me) can use the partitions, how do I specify which user name? (The man page is annoyingly unclear about this).
I'v recently migrated from Ubuntu to Debian. however when attempting to browse one of my ntfs partitions I get the following error "Invalid mount option when attempting to mount the volume 'a' a is the name of the ntfs partition i'm trying to browse.I'm using Debian lenny
I have two ntfs partitions I use to store music and data. I've been using them in all my linux boxes without any problems. Simply use Ntfs-3g with noatime and everything works great.
However, since the update to OpenSuse 11.3 writing to my NTFS partitions takes FOREVER. I've specified noatime, relatime and norelatime successively without success. The partitions have plenty of space and are defragmented.
When copying large files, It starts fast at first, but in the last hundred MB it slows down to about 1.5MB/s. Even after the transfer is supposedly done, the HD led remains on and all other read/write activity involving the partition is completely halted. This can take between 5 minutes to 10 or more depending on the size of the file. When copying several small files, (100 MB or less) it starts at about 1.5MB/s from the beginning.
I have the latest versions of fuse and ntfs-3g installed
I first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
I'm new to OpenSuse 11.2, In Yast partitions configurations, I've mounted all NTFS partitions successfully without ticking "read-only", and according to this webpage: NTFS - openSUSE I checked my fstab file, there's no "-ro" in the file. But I still couldn't write to any mounted NTFS partitions, I can't do paste file, can't save changed files into NTFS partition.
I have installed ubuntu on my notebook, and there are 4 partitons in the hdd, all are NTFS, only one is ext4.
the problem is i deleted some hidden folders(in ubuntu which are not hidden, such as recyclebin and file information table folders) in ntfs partitions, now i need to reinstall the windows 7 back, i have a doubt that even windows will ever recognize those partitions again?
On my laptop I have Windows and Ubuntu, and I use Ubuntu very often. How can I auto-mount the NTFS partitions once I run my Ubuntu without the need to manually ask to mount it and confirm with the root password each time and for each partition?
i want to mount at kubuntu startup some ntfs drives now, i have, on dolphin, to click the ntfs partitions to mount them and after doing that, this lines are included on /etc/mtab
but when i add that lines to /etc/fstab and reboot, i can't access the ntfs drives. dolphin says than only "root" can mount /dev/sda1 on /media/WD10EADS (for example) i tried this too:
I have U1004 dual boot with MSW7 and sometimes want to mount those NTFS partitions for mostly reading operations. Ubuntu makes it easy by a single click in Nautilus. How to change this behavior and allow mount NTFS partitions with user's password only, like sudo behavior, for example? In addition, how to mount them read-only?
Note: I mount those NTFS partitions occasionally and there is nothing in fstab about it.
I am having a dual boot setup with Lucid Lynx and Windows 7. I want to automatically mount the NTFS partitions whenever I login to Lucid. I am looking for a graphical tool to set this up. Kindly suggest one.
How can I hide NTFS partitions so that can't be mounted?I noticed when I'm working on Ubuntu that I can delete files on my Windows NTFS partition, I think that's a risk
I was running Windows XP SP3 when one of my drives (or partitions) suddenly wasn't accessible. I booted into an old ubuntu Live CD I had (version 8.X) and tried mounting it. I could see the other partitions at this time. I rebooted the machine a couple of times (for normal reasons) and after a particular reboot none of my partitions were present! All seemed to have gone! I didn't do anything except mount the partition from Ubuntu Live CD. Made no write operations .
fdisk -l gives me this:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
to list the files and I get:
Code:
Can't open filesystem. Filesystem seems damaged.
I originally had 6 partitions (including my primary). What do I make of the above screen and how do I proceed? Mot of testdisk documentation says "Choose the paritions to recover..." but I do not have a partition. What do I do to recover my data? I don't mind reformatting my entire HDD, but I need to get some jpegs and movie files off it first.
I've recently installed Arch on my main PC, and I decided to use Xfce4 desktop environment as appose to gnome that I use on my laptop. Firstly, I had to search round for an icon theme to get any of the icons working (they were all just papers with red crosses in them to start with), which I think is taking lightweight a bit too far :P, but just my opinion.Now i've got that sorted I turned to the problem of auto-mounting partitions. I'm having some trouble getting HAL to auto-mount my NTFS partitions which have my documents and music on. They are NTFS because i've got dual boot windows, and had windows before Archlinux so NTFS was the logical fs type to use. I think HAL is auto mounting dvd's etc. (can't be sure as I aren't in Arch at the minute)I can mount the NTFS partitions manually using:mount -t ntfs /dev/sda(number from 1 through 3) /mnt/sda(1 through 3)
However, I can only access this via root, so I carried out: mchmod scott.scott /mnt/sda(1-3)or something similar and that works fine, so I know they can be mounted successfully. I've tried auto-mounting them using fstab but can't seem to get this working, and I would rather not have fstab auto-mount them, I would rather let HAL sort all that out for me.I have checked that dbus, hal, consolekit and xf86-input-evdev are all installed (although im not sure what xf86-input-evdev does).Has anyone got any ideas why its not auto-mounting the NTFS partitions. My laptop mounts the NTFS windows partition fine using gnome.
i have a window xp////on the same machine i installed linux mint9.....mostly i am using linux mint9.....i want to operate my NTFS (Window XP) Partitions from linux mint9..
I have installed Redhat Enterprise Linux Server 5 on my laptop. I have also installed Windows 7 Operating system on the laptop. I want to access windows 7 created ntfs partitons on RHEL 5 server. I tried installing the following rpm's on the rhel5 for accessing the ntfs partitiins.
