OpenSUSE Install :: Mount A Live Compressed File System For Reading & Writing From A LiveCD/DVD Image?
Jul 9, 2011
On a Linux CD/DVD, there are compressed filesystem images for the live version for KDE or Gnome for example, but they have no extension, but they are clearly an image file ( compressed filesystem images for the live version before installation ) !!
I was wondering, How do I mount these compressed filesystem images, after I copy the ISO content of the CD/DVD on my system .... I want to edit some files or packages and make some changes, like if I want to customize a live version of gnome for example ! ... ( I know you might be tempted to tell me to use KIWI etc to customize etc ..... ) ... but I want to be able to mount the compressed file system image, then edit it for reading and writing while it is in a subdirectory on its own ... i want to open it ! ... is there a way to do this ??? ... these type of files have no extension ...
i can open this compressed filesystem image then to edit for read & write ... before I roll it back again ..... If and when I succeed .... what should I watch out for ? ... will the same compressed file image but slightly modified work again ?
PS. that same question could be kind of translated or be extended like : how do I use unionfs/squashfs programs on the command line to mount these image files with no extension for read & write mode ???
I have a problem, I'm trying to make my own LiveCD, but I can't mount compressed SquashFS file system. Here I give you my limited LiveCD version... If somebody would take a look [URL]
I was following this tutorial on How install the rpmfusion nvidia drivers in Fedora 13Here's the tutorial:Quote:Originally Posted by leigh123linuxF13 Howto for the rpmfusion nvidia drivers This is a Three-Step Process. If you don't follow all three steps, your install will fail!1. Install the nvidia driver. ( if you have 4Gb of RAM or more you will probably have a PAE kernel [32bit only] so follow the PAE part )For GeForce 6, 7, 8, 9, 200 & 300 series cards
Code: su rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-
I have problem to mount a compressed (ISZ) image under Linux, which was created by e.g. UltraISO? I am aware about user-space fuseiso, but it fails to mount these images, as I have reported in Debian bugtracker (correct me if I ddi something wrong). I ask the community for a help: I need a proved solution to mount these images without decompressing them.I believe that CONFIG_ZISOFS kernel option cannot help, as it refers a special RockRidge extension (per-file compression with mkisofs -z or mkzftree).
I'm getting this error trying to install Live GNOME 32bit v11.3 or 11.4 build 11:
Code: Couldn't find Live image configuration file
I'm installing from a USB stick. I can install v11.2 the same way no problem. USB stick created using SUSE Studio Image Writer and Win32DiskImager give same results.
I want to create a compressed ISO image file and mount that file to one of the virtual drives and access the content (read-only) without worrying about manual decompression/extraction.For Windows and Linux (Ubuntu) OSes.
I am trying to make a liveUSB(my DVD drive run out monthes ago), I use this iso image: openSUSE-11.1-KDE4-Reloaded-LiveCD.x86_64-4.3.1-Build4.1.iso I just cp the file in the iso into the usb, and cp the L : ootx86_64loader*.* into my usb, mv the isolinux.cfg into syslinux and run with syslinux command to install the bootloader. and boot with my usb drive,get Error: .. Loading device nodes with udev Boot logging started on. ... No devices matches MBR identifier: 0x5b265f15 reboot Exception: error console at Alt - F3/F4 ...
I am trying to read a file character wise and trying to write the same character to another file. In this process, I unable to read and write white spaces successfully to the new file. The script reads the white spaces but while writing the white space is lost. The section of the code, is given below. Please advice how can i read and retain the white space while writing to a new file.
Code:
if [ -s f_test.txt ] && [ -f f_test.txt ]; then echo "File Exists !!" while read -n1 char; do
There is the Archive::Zip I think I can use with Perl 5.10 but I don't know how. I don't want to read or write any files, just zip something in memory, with best compression, like
$text = "this is a test"; $zippedtext = &Zip($text); sub Zip {
I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?
After the reboot of computer this text appears: ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Unknown keyword in configuration file. Loading Invalid or corrupt kernel image. boot:
I've been able to get access to our Netgear NAS, I can browse it, copy files etc. just fine. But I don't have "direct access" in as far as, Open Office won't open any files residing on the NAS, neither can I save directly to the NAS form a program and when I get a "Browse for File" form field on a website (eg attachments in GMail etc.), I can't browse to the NAS either. My XP box does do all of this, either through my mapped network drive or even through browsing the network. How can I make openSuse 11.2 use the NAS with my login credentials as if it was a local disk?
I have a system built and running in exactly the basic configuration I want, with my recompiled kernel, extra packages, special drivers, everything works, life is good. What I want to do is take this exact setup and create an image I can copy onto a bootable USB stick. Is there a way to essentially take the contents of my hard drive and copy that onto a USB stick and then boot directly from that? The use case behind this is that I am building an embedded system of which I may have hundreds of boxes with identical hardware and software configurations. Instead of hard drives, I am going to use USB sticks for cost efficiency and maintenance. My idea is that when it's time to upgrade, I could just image a hundred new sticks and go out and swap them.
My issue is that a standard LiveCD install gets me maybe 25% of the way to a finished system. I need to recompile the kernel for realtime support with my CPU, add some fidgety drivers for some specific hardware, and install a whole bunch of additional packages. I suppose I could create a makefile(s) to replicate all the manual steps of the buildout but that seems like a lot of unnecessary complexity IF I can just image that running system as it is.
I am trying to install 11.2 on a Dell Poweredge 2550 - two processors,all scsi, raid disabled, ATI grahpics. Fails at "failure to mount clich file system" - reboot.
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers. [URL] It's a straithfoward proces so I dont understand what I did wrong. I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04 Also the partition is mounted at /home, so I dont know if that makes any difference.
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers.I've used help from the official site http://www.fs-driver.org/and this tutorial http://www.dedoimedo.com/computers/l...s-windows.html It's a straithfoward proces so I dont understand what I did wrong.I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04Also the partition is mounted at /home, so I dont know if that makes any diferance.
My main workstation incorporates a mixture of ext3, ext4, and NTFS partitions scattered across a number of hard drives. Several of the ext4 partitions are encrypted, and I intend to encrypt the rest of the Linux partitions in the near future.I run VMware workstation, with several Windows OS guests, including Win2K, WinXP and Win7. My Win7 VM is installed on a virtual hard disk, and that virtual hard disk is encrypted using VMware facilities.So this leaves me with a bunch of NTFS partitions that are not encrypted. These are physical partitions on a couple of different hard drives. The reason I have them is ancient and historical, and as I have upgraded my system over time I have maintained the architecture due to the extreme difficulty of rearranging Windows systems.I still need to maintain Win2K and WinXP support, and rearranging those virtual machines would represent a hideous nightmare for me; I really want to maintain the same hard drive partition architecture.But I want to encrypt the NTFS partitions, in a fashion that can be handled by any of the Windows operating systems, AND can be accessed for read and write from Linux.Is this possible? If not using Windows facilities (I don't think ntfs-3g handles encryption, and there are known backdoors in the Windows facilities anyway), is there any third party solution that would work? Would True Crypt do the job in a fashion that would permit access from all the various operating systems, as required? I do generally mount the NTFS partitions in whichever Windows VM is appropriate, then share them out via SMB, but there are circumstances (like when a VM is not running) where I will directly hit them from Linux. So, it is possible for me to contemplate a solution that only works from Windows, but this would cost me the ability to repair/modify those filesystems directly from Linux, which under certain circumstances (a malfunction of the VM, for instance) could be a problem.
I am about to write a program to listen and read data from /dev/ttyS0 and write the data to /dev/ttyS1 after processing. Also, the same time I need to listen to /dev/ttyS1 and write to /dev/ttyS0 if any data arrived at /dev/ttyS1.
I would like to write a program that can read every ethernet frame arriving on a specific hardware NIC, without a TCP/IP stack otherwise doing anything on that NIC. Likewise I want to be able to write out to that NIC. So every arriving ethernet frame, of all types, would be readable (probably one at a time to preserve frame boundaries). And every write of exactly that same data would send frames out. The data read and written would be the whole ethernet frame. The kernel would do nothing else with this data, but other NICs would still operate as usual.
What I would be doing is that on 2 separate NICs, copying frames from one to the other, as in bridging. But I would also be doing modifications per what my program needs to do (not at liberty to say what that would be). What facility would I need to be looking at to do this? There is no ethernet device file. Would raw sockets be able to do this? The programming language will be C.
I want to be able to access my email account from the console. I'm reading all day about fetchmail, postfix, sendmail etc. but all the stuff I found is related to building whole mail system. All I want to do is to read my emails and write some. Which is the painless way to do this? I successfully configured Evolution for this purpose but I want to do that from the console.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
Yesterday I did follow exactly the description how to build a live system on a USB Stick with the additional second partition for the data of Live_USB_stick. So far I had success, as my Netbook did start booting and loaded the OpenSUSE 11.2. Then I rebooted the Netbook and it never again comes up with the 11.2. It looks as if it would stop somewhere at starting the graphical system, but I'm not sure.
Today, second try, I created the USB stick with the 11.2 Live System only (no second partition). My Netbook starts booting and shows the 11.2 system successfully, also further boots are the same successful. Then having created the Live system with the second partition again, results in a un-bootable Netbook again (not even the first time it comes up).
What I wonder when I did check the USB partitions: the one (sdg1) with the Live-CD can be mounted and the content is readable. The second one (sdg2) cannot be mounted; shouldn't it be mountable and shouldn't it be formated with a file system? Did anyone have some experience on this? Or, at least, the people having a running persistent live system, what does the partition them show up?
I am too stupid to run a live Linux on a Macbook air. I used both, an openSUSE 11.3-KDE Live-CD and a Live-USB key and tried several boot options.
(i) I held down "C" to boot from CD → didn't work. It's an Apple CD drive but came with an older Macbook air a few years ago. (ii) Found the bootmenu by holding down the option (ALT) key. Neither Live-CD nor Live-USB were shown. You can only choose the harddrive (and available wireless networks). (iii) "Command-Shift-Option-Delete" to boot from an external drive didn't work either. I assume my USB key is an external drive, right?
I don't want to install openSUSE on the mac I just want to run a live system from time to time. Therefore I want to bypass Boot Camp or rEFIt and that's probably why I am stuck here. I wonder, if I really have to setup one of them to boot into a live system? The wiki article "openSUSE on a Mac" is under review right now.
Does anybody know of a program that can make make images of the entire hard drive while it's in use? Like Ghost and Acronis can do? I have a production ubuntu system that I need backups of, however, I can't power it off.
