Debian :: Soft Lockup On Fresh 8.3 Install On Acer Aspire S7-391 Laptop
Feb 11, 2016
Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
View 11 Replies
ADVERTISEMENT
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Jan 17, 2010
I recently bought a new Acer Aspire and installed Lenny, I can get a wired network/internet connection however not a wireless connection. I use wicd. Bluetooth doesn't work either though I suspect that it might be the same issue.
Don't know if it helps however when I tpye iwconfig I get:
ladb:/home/nigel# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
View 14 Replies
View Related
Oct 14, 2010
I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.
View 4 Replies
View Related
Jun 18, 2010
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
View 2 Replies
View Related
Aug 18, 2015
i'm trying to Debian 8.1.0 on my notebook Acer Travelmate 2200. Currently i have very outdated version of Linux Mint. It works fine but I prefer keeping system updated. Only way to get updated system now is install new one, and here i have a problem. After CD/ISO booting, installation looking for a mountd devices, etc. then i got statement that CPU stuck for x sec. The same statement appears every 20sec. I was trying it on other linux distr's they give the same error. I didn't overclocked my notebook, his temp is ok. I'm working on it few hours each day, it didn't overheat. Someone told me thats bug of 2.6.x kernel but I'm trying install new system with 3.16.x.
View 4 Replies
View Related
Mar 23, 2011
11.4 Boot Freeze That is there is a BUG: soft lockup - CPU#0 stuck message and the boot hangs.The modprobe/migration codes are not identical with the linked thread. I'm stuck with CPU#0 at [modprobe:138] and #1 stuck at [migration1:8]. Generally after 61 or 63s.
This is a zypper dup from latest 11.3.The machine boots with acpi=off, luckily. But I'd like to have it all working.The forum says I can't post attachments; hwinfo output seems a bit copious to quote inline. But I'd be happy to provide any additional info obviously.
View 5 Replies
View Related
Jun 12, 2010
I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
View 3 Replies
View Related
Aug 26, 2010
I have a ACER Aspire laptop with a webcamera. how to use it? I have Ubuntu 10.04 installed.
View 5 Replies
View Related
Oct 20, 2010
I want to install Ububtu Desktop 10.10 on my old Acer Aspire 3693WLMi laptop. Where can I find drivers for this hardware? I think the main problem will be WLAN adapter driver.
And what's about Russian localization in current Ubuntu release? All is OK, am I right?
View 1 Replies
View Related
Apr 8, 2010
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
View 4 Replies
View Related
May 1, 2010
I upgraded my wife's old Acer Aspire 1350 laptop to Lucid Lynx, which works fine, except for the fact that the splash screen both when the OS boots and is shut down is completely garbled and unreadable. The screen is also unreadable when accessing a tty via CTRL+ALT+F2 etc. The GNOME desktop resolution is completely unaffected and is perfectly usable. The splash screen works on MY desktop PC, but it does seem to be using some strange video timings, as my monitor recognises it as 640x480 but doesn't seem able to centre the screen properly. I strongly suspect that this is the cause of problem and my wife's laptop display just does not like the video mode. If I plug my wife's laptop into my monitor, it displays OK.
View 2 Replies
View Related
May 6, 2011
I can get wired internet if i connect the laptop to the router, but no wifi since I think I dont have the drivers. i dont see anything in aditional drivers.
View 2 Replies
View Related
Jan 14, 2010
I have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
<6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
[code]...
View 4 Replies
View Related
Feb 25, 2010
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
View 7 Replies
View Related
Jul 25, 2011
My landlord upstairs just got a new modem and WiFi by Clear.com and when trying to get the WiFi to work...it just wouldn't connect with my laptop. They have 2 computers upstairs, one laptop and one desktop that recognized the WiFi and don't have any trouble using it. Wondering if there is something I have accidently clicked or changed to make it not connect. It does not have an error message, it just does not connect completely.
View 1 Replies
View Related
Jan 24, 2011
I have an Acer Aspire 5742Z with an Intel HD Graphics card and if I connect an external monitor I have no troubles using RHELS 5, but nothing on my main laptop monitor.
View 2 Replies
View Related
Apr 30, 2010
I recently installed 10.4 on my laptop and I love it, so I wanted to install it on my desktop. It's a somewhat older computer, AMD3000+ nForce 2, 1.5 gigs of Ram and a Radeon x1650. Whenever I try to start the Live CD I get the error soft lockup - CPU#0 stuck for 61s and it doesn't continue.
View 9 Replies
View Related
Jul 30, 2011
I cannot boot into Ubuntu at all. I have two kernels installed, 2.6.35-28 and 2.6.35-30. The first thing that happened today was that I wasn't able to boot into the latter. I was shown the (in)famous "BUG: soft lockup - CPU#0 stuck for 61s". At this point I could still boot into the 2.6.35-28 kernel. But after shutting down and starting again an hour later, I got the same message when trying to boot into 2.6.35-28. I have tried leaving out the boot options "splash" and "quiet" on both kernels and also adding in "noapic". No combination helps. Needless to say, booting into recovery mode doesn't work either. Up until today, I have been able to boot into both kernels with no problems.
View 1 Replies
View Related
Feb 2, 2011
I have a system running CentOS 5.5 (194.32 Kernel) that has been working fine for about 8 months. I found it stuck one morning dumping a Soft Lockup Kernel message every 10 seconds and have been trying to find out what is going on - here is what I've done and found.
System is a Core i3 with 4Gb DDR3 ram and 2 1.5Tb SATA drives - everything is less then 1 year old with not too much load (this is a backup system for my server - a twin and the other works fine)
Intel Mobo: DM55HC
Rebooting the system (after doing a fsck on the drives with lots of errors) it runs for about 20 hours or so and then drops back into this problem.
Prior to going into the soft lockup it reports that the Journal has aborted on one drive or the other and drops into a Read Only FS.
There is nothing in the logs apart from the aborting journal message and the soft-lockup)
Tried fsck with badblocks check on the 2 mountpoints for both drives (dunno how to check the swap partition) - nothing I could see there.
I have tried memtest for about 36hours. No errors
I ran smartctl long tests on both drives. No Errors
View 14 Replies
View Related
Jun 7, 2011
I've recently acquired a little 10" netbook (Acer Aspire One D255) and am running Debian squeeze on it. It runs great except for the internal SD card reader, which doesn't do anything. If I have a USB card reader handy then it works fine, but it would be nice to have the internal card reader working if possible.
/var/log/messages says this:usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: New USB device found, idVendor=0cf2, idProduct=6250
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
usb 1-5: Product: UB6250
usb 1-5: Manufacturer: ENE FlashBut no device is created and nothing can be mounted.
Doing a little searching reveals many similar complaints from last year, without particularly satisfactory solutions, but I can't find anything more recent. Does anyone know if there's a Debian fix for this yet? By which I mean a simple fix involving adding a module package or maybe upgrading to a wheezy kernel or something like that?
View 11 Replies
View Related
Feb 25, 2009
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies
View Related
Jan 9, 2010
I am trying to install Fedora 12 on an Acer Aspire AMD 64 2 with 1 GB of memory.
I downloaded the Fedora 12 live CD Fedora-12-X86_64-ISO.
When I try to boot from that CD, I get a message "irq 17 too bust" and the system hangs before finishing the boot process. So I have very little to go on.
Ps. I previously installed Kubuntu 9.1 without any problems.
View 2 Replies
View Related
Dec 29, 2009
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies
View Related
Jan 19, 2011
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
View 3 Replies
View Related
Mar 14, 2011
I have an Acer 4810T laptop with Intel graphics. I run openSUSE 11.3, and am about to upgrade to 11.4. But both systems still have a very bad bug with screen brightness. The Fn+Arrow keys do change screen brightness, but after using them the system is rendered extremely sluggish and unresponsive. This sluggishness is most pronounced with a very important Wine app I need to use. The only way to fix the sluggishness is to reboot. With 11.4, the problem is worse because the system boots and automatically partially dims the screen, thus making it even more necessary to change the brightness. Neither Gnome nor KDE are able to change the brightness via their power managers. This means that I can't dim my screen automatically upon disconnecting the A/C power.
I have read many experiences from Ubuntu and openSUSE users, who all have the same problem. I have tried both intellegacy and the new intel drivers, and they both have the problem. I have read that some users have improved the situation by upgrading or downgrading the BIOS. Others have been experimenting with kernel patches:
[URL]
View 1 Replies
View Related
Jun 19, 2010
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
View 12 Replies
View Related
Jun 4, 2015
After upgrading to Kernel 3.1.16-0-4 my Acer Aspire ES1-311 freezes during startup. I can still enter the recovery mode maintainer shell (sometimes), but sometimes it also freezes after giving me the root shell prompt.
View 12 Replies
View Related
Apr 1, 2011
I tried to create an xorg.conf because I didn't have one already. I put the configuration for the synaptics touchpad in it and in the gnome preferences/mouse my touchpad actually was recognized by its name. But still it didn't work :/ I tried deleting my xorg.conf and making a xorg.conf.d directory with synaptics.conf because I saw someone recommend it in another thread. But now the gnome/mouse settings doesn't see it and it still doesn't work. I've read several threads from Arch Linux's forums saying it may be that the module is loaded twice, but I really have no idea.
Here's the /proc/bus/input/devices:
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
[code].....
View 5 Replies
View Related
May 21, 2011
I have an Acer Aspire 5102 notebook computer with the infamous Broadcom 4318 chipset. In the past I have had to install FW cutter & proprietary drivers to get this chipset to work with Ubuntu. With the release of Ubuntu 10.10 Marverick Meercat I seem to remember the WiFi working immediately after installation; although I could be mistaken.
Will I have to go through similar gymnastics to get Debian to work on my system; or do you think it will work right away?
View 1 Replies
View Related