I am trying to install Fedora 12 on an Acer Aspire AMD 64 2 with 1 GB of memory.
I downloaded the Fedora 12 live CD Fedora-12-X86_64-ISO.
When I try to boot from that CD, I get a message "irq 17 too bust" and the system hangs before finishing the boot process. So I have very little to go on.
Ps. I previously installed Kubuntu 9.1 without any problems.
I am not able to Install RHEL5 in my Acer Aspire 5742 Laptop, Need Help
View 2 Replies View RelatedI wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.
I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
View 2 Replies View RelatedI have and acer aspire one and i'm trying to install fedora 11. Whenever i try to install it though it just comes up with a silver screen and an empty box which just dissappears.
View 5 Replies View Relatedi bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies View RelatedI recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies View RelatedI have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
View 3 Replies View RelatedHad the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
now the thing is im bit of a dumb girl when it comes to computers. Apparently I need to install some Java software just to get my pictures on my facebook. I have tried following the instructions at Java but i am a total newbie lol
I was hoping some of the boys here could help me , I did try look at some other threads but I just get even more confused. Please dont be mad if this is a dumb question coz some of us are not as smart as you guys here. I am also looking forward to making new friends here if you on facebook xx xx lol
After loading Ubuntu 10.10 on an Acer Aspire 5100, I find that the onboard LAN does not work. My router "sees" the laptop but my laptop does not "see" the router. Ubuntu says that the firmware is not installed.
I read earlier posts about an issue with Broadcom and later editions of Ubuntu but I haven't seen a definitive fix. With the LAN not working, it is not possible to connect to the Internet and further compounds the problem. My understanding is that the Acer Aspire 5100 uses a Broadcom LAN. How can I install the firmware that it is asking for?
what version of flash player do i download for my acer aspire one using linux. and how do i install it when i have downloaded it?
View 5 Replies View RelatedI just installed Fedora 14 on an Acer Aspire 4930 Laptop. Everything works well, but i have to sound.
View 1 Replies View RelatedAcer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
STEP 1) Install Slackware 13.1 (everything works out of the box*) Gotcha: 3d isn't enabled in X Fix: Yes it is... run glxgears from a console or run glxinfo | grep render.
Gotcha: No CD drive to install from Fix 1: Get a usb CDROM drive Fix 2: Boot off of a thumbdrive using the usbboot.img (found on disc 6) Gotcha: Card Reader (ENE Technology) doesn't work Fix: You have to use the MMC driver-modprobe mmc_core modprobe sdhci modprobe mmc_blockIt should now show up in dmesg and /dev/mmcblk0p1 should be created if it is an SD card. NOTE: SD Card portion works using SDHCI driver. NO DRIVERS for XD and MS cards yet. *Card reader is gimped due to ENE Technology being evil.
When rebooting a fresh Fedora 15 install or even after the end stage of the actual installation itself, my Acer Aspire One (AOA110) with 16GB SSD and 3309 BIOS just stalls.
I have tried installing to the SSD and also to an external USB connected HDD.
In all cases the actual reboot process stalls when shutting down and I have to power cycle the netbook to reboot it. The boot process works perfectly and F15 starts up fine.
If I use a "poweroff" command instead of a "reboot" command, the netbook powers off correctly. It's just the reboot that doesn't work. All updates have been applied to F15.
I should mention that it works correctly under F14...
after messing with fstab + mtab, my aspire one netbook completely failed , so i rebooted using a live USB. My desktop and default settings were restored. When i tried to install firefox 3 (default browser is firefox 2 ), yum hangs and refuses to do anything. I tried deleting and reinstalling yum, and it was mostly successful until i tried the "make" command which according to bash does not exist. how to install make without using yum?
View 5 Replies View RelatedPackage gnome-bluetooth-2.28.6-2.fc12.i686 already installed and latest version so that's done.I'm certain I have a bluetooth adapter inside my laptop, however when I go to System > Preferences > Bluetooth, the started program says there are no bleutooth devices.There is a hardware button with the bluetooth symbol.
However :
[root@jonas Jonas]# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)[code].........
I'm absolotly not sure, if I'm right here. During start I see the message "unknown (unsupported) BIOS version Acer/Aspire 6920/V1.14 , please report, aborting!"but I did not found any Mail or URI, where I can report this one. So I paste the partof the boot.msg here. Hopefully it will be on the right place. If not :
Acer-6920:/var/log # cat boot.msg |grep 8.82
<4>[ 0.038082] [<c0208056>] show_trace+0x26/0x40
<4>[ 0.185822] [<c048ef1c>] acpi_tb_load_namespace+0x6e/0x136
<4>[ 0.185827] [<c048effa>] acpi_load_tables+0x16/0x4b
[code]...
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
I have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.
In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.
[Code]...
If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?
Have a dedicated Fedora 10 laptop so that I can learn everything I need to know. I am using an Acer Aspire 3000 with a fresh copy of Fedora 10 and KDE
The Aspire 3000 has a built in broadcom wireless card, with windows XP you activate the wireless using an LED button on the front of the laptop, but with Fedora I can't seem to do this.
I have found a couple of threads to fix this error on Ubuntu but nothing about fedora. I don't want to change OS as I have just about got this system running like clockwork. I have left the wireless until last as the normal LAN works fine.
Here is the result of my iwconfig:
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
I have a problem with my bluetooth on my notebook.
View 1 Replies View RelatedI just found it out now, after installed the skype and tried setup my web/audio on it, the webcam works fine but the mic doesn't work, so i went to the audio menu on fedora 14 and found it out the mic is dead.Someone had the same issue? Can someone let me know what can i do to fix that?
View 14 Replies View RelatedI just installed Fedora 12 x86 in an Acer Aspire One D250. Everything ran smoothly and was detected upon install but unfortunately after all updates were applied to it I ended with a device with no network connection (not even Ethernet).
This appears to be kernel-related because the old kernel (stock) works as expected. The problematic kernel version is (2.6.32.9-70.fc12.i686).
Is there any known workaround for this? Or am I condemned to run this older kernel until the other one gets fixed?
Another question, in the event a new kernel comes out I'd like to keep to older one as a back up, how can I arrange that?
My laptop is the one mentioned in the title. And it's completely offline at the moment.
Code:
$iwconfig
lo no wireless extensions.
Seem to have some troublesome chips.
Code:
$ lspci
03:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
05:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
code....
although in my case they should be for the 2.6.33.3-85.fc13.x86_64 kernel.
And I've been searching that repo for ages now, and I can't seem to find anything with kmod-wl or broadcom in there. I'm well aware that this is most likely because of my own ignorance as to the build up of said repo.