Fedora Installation :: How To Install Epson DX8450 Printer On Acer Aspire One?
Mar 6, 2009
I wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.
I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
I have and acer aspire one and i'm trying to install fedora 11. Whenever i try to install it though it just comes up with a silver screen and an empty box which just dissappears.
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
I am trying to install Fedora 12 on an Acer Aspire AMD 64 2 with 1 GB of memory.
I downloaded the Fedora 12 live CD Fedora-12-X86_64-ISO.
When I try to boot from that CD, I get a message "irq 17 too bust" and the system hangs before finishing the boot process. So I have very little to go on.
Ps. I previously installed Kubuntu 9.1 without any problems.
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
I have installed fresh fedora 12 & installed many softwares in rpm & tar forms , also i used yum to do installation, all these attempts were successful. But i could not install & configure Epson Dot matrix FX-2175 printer. Epson Dot matrix FX-2175 printer worked fine in my earlier distro fc11.
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
Had the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
I've got an Acer Aspire AM3920 (Intel Core i5) Desktop PC. I want to upgrade my Ubuntu Maverick Meerkat to Natty Narwhal, but it just isn't working. I've tried to upgrade two times, both resulting in a crash while installing. When I try to install it from a Live CD, I'm getting a black screen and when I press a key in the purple screen of the Live CD and select nomodeset, it doesn't work either. So my question is: Is it possible to install/run Ubuntu 11.04 on this PC?
now the thing is im bit of a dumb girl when it comes to computers. Apparently I need to install some Java software just to get my pictures on my facebook. I have tried following the instructions at Java but i am a total newbie lol
I was hoping some of the boys here could help me , I did try look at some other threads but I just get even more confused. Please dont be mad if this is a dumb question coz some of us are not as smart as you guys here. I am also looking forward to making new friends here if you on facebook xx xx lol
After loading Ubuntu 10.10 on an Acer Aspire 5100, I find that the onboard LAN does not work. My router "sees" the laptop but my laptop does not "see" the router. Ubuntu says that the firmware is not installed.
I read earlier posts about an issue with Broadcom and later editions of Ubuntu but I haven't seen a definitive fix. With the LAN not working, it is not possible to connect to the Internet and further compounds the problem. My understanding is that the Acer Aspire 5100 uses a Broadcom LAN. How can I install the firmware that it is asking for?
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
The acer netbook D255e - N57 comes with a factory installed linux OS but Acer reps seem unable to fully instal Ubuntu 10.1 or 10.04. Even linux lite lacked the drivers to run several things. Is it possible to do this??? If it can be fully installed I will definitely go for a new cyber life with linux but if not I may have to remain a thrall to bill gates and go for a Eee PC netbook instead.
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following: 1. I tried rfkill unblock all with negative results 2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes 3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: ferris@sowerseed.aw
Acer Aspire S7-391 laptop, 64 bit install Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
STEP 1) Install Slackware 13.1 (everything works out of the box*) Gotcha: 3d isn't enabled in X Fix: Yes it is... run glxgears from a console or run glxinfo | grep render.
Gotcha: No CD drive to install from Fix 1: Get a usb CDROM drive Fix 2: Boot off of a thumbdrive using the usbboot.img (found on disc 6) Gotcha: Card Reader (ENE Technology) doesn't work Fix: You have to use the MMC driver-modprobe mmc_core modprobe sdhci modprobe mmc_blockIt should now show up in dmesg and /dev/mmcblk0p1 should be created if it is an SD card. NOTE: SD Card portion works using SDHCI driver. NO DRIVERS for XD and MS cards yet. *Card reader is gimped due to ENE Technology being evil.
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
When trying to hybernate the system tries to prepare to hybernation but when it is going to complete the operations it does not hybernate but finally suspends.
note that it is not exactly the same as choosing to suspend. In fact, it seems to me that when choosing to hybernate the system is unable to do it and consequently it chooses "at least" to suspend.
I have an Acer Aspire 5610 and since installing Ubuntu 9.10, the computer tends to shutdown by itself while I'm using it. Does this happen to anyone else? I would like to know what's causing this so I can either fix/solve it. I never had this problem on Ubuntu 9.04, 8.10 or 8.04. Checking the system log file viewer hasn't given me any clues to what's causing this. I just know the issue started when I installed 9.10.
I am a new user of Ubuntu, I use Ubuntu 10.04 Lucid Lynx on my laptop Acer Aspire 4741G and the specification are:
1. Intel(r) Core(tm) i5-430M Processor 2. Intel(r) HD Graphics 3. 2GB Memory 4. HD LED LCD
I have a problem in adjusting brightness, before this laptop, I used Ubuntu on my Acer Extensa, all shortcut buttons are working properly, include Fn button. To adjusting brightness, I only have to push Fn button + arrow left or arrow right. And now, I try in Aspire 4741G, it does not work. I also try to type command via terminal:
