CentOS 5 :: Can't Seem To Get A Fresh Install To Boot On A Acer Aspire T160 Desktop Computer?
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
ADVERTISEMENT
Feb 11, 2016
Acer Aspire S7-391 laptop, 64 bit install
Previous was Debian 7.6, no issues.
Not doing anything special, just browsing the web and I get a few of these soft lockups. Cannot reboot, have to power it off and on when it happens. USB stops working also.
Code: Select all[ 7002.597774] BUG: soft lockup - CPU#1 stuck for 22s! [khubd:93]
[ 7002.597777] Modules linked in: tun hid_generic hidp rfcomm bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) cfg80211 cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace 8812au(O) ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev joydev media x86_pkg_temp_thermal intel_powerclamp intel_rapl acer_wmi sparse_keymap coretemp iTCO_wdt
[Code] ....
lspci output:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
[Code] ....
View 11 Replies
View Related
Jun 7, 2011
after i have installed suse 11.4 on my acer m1300 my computer (desktop) won't auto boot. if i boot it manually my computer freezes. only if i boot it in revovery mode it continues with automatic confiration and it installs suse. but even than it won't reboot and i have to shutdown the hard way. when i restart the computer freezes and won't open opensuse.
View 9 Replies
View Related
Dec 29, 2009
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies
View Related
Jul 23, 2010
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
View 1 Replies
View Related
Apr 24, 2011
My sd slot is not working at all, doesn't recognize it. I think it may have something to do with having the desktop version installed but I could be wrong. I was only introduced to linux 4 weeks ago and am not very familiar with it, but already know I like it more than windows! I have tried three different sd cards and they all work in my other laptop with Windows 7.
View 5 Replies
View Related
Mar 18, 2011
I recently installed ubuntu 10.10 on my aspire 3000 and everything seemed to work just fine... until I tried to activate desktop effects. tu put it simple, it just don't work. I checked and doubled-checked the lsmod | head to make sure that my drivers (sisfb / sis_drv.so) were installed and loaded. they were. I then made sure that my pc was opengl-supporting (Glxinfo | grep "direct rendering". The answer was positive. With that in mind, I tried many different ways to run compiz(compiz --replace, appearance-desktop effect, run app-compiz) but neither if these gave any results.
View 1 Replies
View Related
Oct 30, 2010
Today my Menu Bar and WiFi icon disappeared from my desktop. How can I get it back as I am no longer able to connect to the internet , seee my battery status or log out ?
View 3 Replies
View Related
Feb 17, 2010
Aspire One D250 wlan/ethernet not working on centos 5.4i have tried alot, searchingon net to findout the both lan card drivers for my new aspire one d250 but coudn't find out. Please help me in finding and installing the drivers. infact i have seen alot people searching for the same but no one has successfully installed any of the lan.
View 2 Replies
View Related
May 31, 2010
I have installed the 13.1 usbboot.img to a usb stick and tried to boot up an acer aspire one aod751 but it hangs when it come to the onboard webcam.I am guessing that there is no driver for this webcam.There is no way to disable the usb cam in the bios setup.Is there a command that can be given at boot so that there is no attempt to load the driver for this webcam?
View 6 Replies
View Related
Aug 29, 2010
I usually used freebsd. Now I decided to try linux and selected CentOS 5.5. I installed it on my notebook Acer Aspire 5930G (I tried both i386 and x86_64 versions) and I have problems with cable networking. I selected static network configuration during install. Internet access is working via NAT on freebsd server.
I can ping anything in my LAN, I can ping any host in internet, nslookup works fine, but nothing else isn't working. I can't wget even in my LAN, can't connect to FTP server in my LAN etc. The same with internet hosts. Iptables turned off, iptables -l shows that all chains are in ACCEPT. SElinux turned off. NAT for accessing internet works fine - when I reboot to windows 7 with same network config internet is working. I guess this could be problem with driver for my NIC - Marvell Yukon 88E8071 PCI-E Gigabit Ethernet. But I can't change it on notebook :)
View 2 Replies
View Related
Dec 14, 2010
I was using Ubuntu 10.04 for the last 6 months, recently I have upgraded to Ubuntu 10.10, it worked fine for around four days, Now the problem is When I power up the system using power button, the system do not power up, I tried to boot from cd both Ubuntu and Windows XP, none works, I tried to go to BIOS setup using F2 and F12 (Acer Aspire 5920 model laptop), but i could not, just a blank display appears, here are some symptoms:
1. When powered on - LED indicating pocressor operation glows for a moment and disappears, few other LEDS indicating batter, music play, forward,stop LEDs glows as as usual,
2. Only blank screen appears
3. tried to switch on the wifi and bluetooth buttons, both did not glow indicating it is not working.
4. Paculiar thing is this symptons appears first time, suddenly all stop glowing and after 2 to 3 seconds again the system comes to this state and remains forever.
Questions:
1. Is it possible to be hardware problem?
2. If it a software problem the suspect can be Ubuntu 10.10 version?
View 4 Replies
View Related
Jul 6, 2011
Boot fail symptoms: Stuck at Syslinux first boot line.Ctrl+alt+del can't work. need to shut down whole system by holding the power button for 3 secs.
System:
-New Acer Aspire 5750, a supposedly popular model.
-i5 2410M + HM55
Remark:
Can boot from CD Ubunutu 11.04.
But, what is a new laptop when it cant boot Ubuntu from USB??
View 5 Replies
View Related
May 13, 2011
I currently have an Acer Aspire One netbook 120GB drive which came with Linpus lite preloaded. I have set-up dual boot a year or so ago. It now dual boots to either Linpus or Vista (yes I know!) via the Linpus grub.conf ( I got the instructions I think from here: [URL] I want to get the latest Ubuntu 11.04 build on this as a third boot option. If this work OK I may ditch the Linpus or Vista build at some point. So I've used Gparted on a USB drive to setup up three extended Logical Partitions (sda5, 6 and 7).
I then loaded Ubuntu s/w via an external drive with
/boot on 100MB /sda5
Swap on 1GB /sda6
/ on the 40GB+ /sda7
When I was asked for the bootloader location in the Ubuntu install gui I chose /sda5 (out of complete ignorance) All fine at this point. What do I have to get the linpus lite /boot/grub/grub.conf to see and start ubuntu?? Or is there something else I need to do?? Also, how does Ubuntu know which swap partition to use, as there is already one for the linpus lite install.
View 14 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Feb 25, 2009
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies
View Related
Jan 9, 2010
I am trying to install Fedora 12 on an Acer Aspire AMD 64 2 with 1 GB of memory.
I downloaded the Fedora 12 live CD Fedora-12-X86_64-ISO.
When I try to boot from that CD, I get a message "irq 17 too bust" and the system hangs before finishing the boot process. So I have very little to go on.
Ps. I previously installed Kubuntu 9.1 without any problems.
View 2 Replies
View Related
Jan 19, 2011
I have an aa1 with the original set up but fire fox is to old for some sites how can I instal a new vertion Sorry, its is an acer aspire 1 with linpus, I think, it comes pre installed with fire fox but an old version.
View 3 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
Jul 27, 2010
I have an Acer Aspire One and I would like to boot from an SCHD card installed into the system Expansion port. It works fine when used in a USB stick. When I check the boot order the expansion port is not listed as an option. There is an option for doing a network expansion. Are there any bios updates that would read that port on startup?
View 1 Replies
View Related
Nov 13, 2010
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
View 9 Replies
View Related
Dec 21, 2009
Had the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
View 9 Replies
View Related
Mar 3, 2011
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
View 4 Replies
View Related
Nov 5, 2010
I am not able to Install RHEL5 in my Acer Aspire 5742 Laptop, Need Help
View 2 Replies
View Related
May 12, 2011
After loading Ubuntu 10.10 on an Acer Aspire 5100, I find that the onboard LAN does not work. My router "sees" the laptop but my laptop does not "see" the router. Ubuntu says that the firmware is not installed.
I read earlier posts about an issue with Broadcom and later editions of Ubuntu but I haven't seen a definitive fix. With the LAN not working, it is not possible to connect to the Internet and further compounds the problem. My understanding is that the Acer Aspire 5100 uses a Broadcom LAN. How can I install the firmware that it is asking for?
View 9 Replies
View Related
Nov 3, 2010
what version of flash player do i download for my acer aspire one using linux. and how do i install it when i have downloaded it?
View 5 Replies
View Related
Mar 6, 2009
I wonder if you can help me please. I purchased an Acer Aspire One netbook running Linpus Linux on it for my daughter. She absolutely love it and so far I have managed to update Open Office to Open Office 3.0.1, installed Skype and installed Firefox 3.She has been doing her homework and would like to print it off but I can't get my Epson DX8450 to work with it. I tried installing drivers from http://www.avasys.jp/lx-bin2/linux_e/spc/DL1.do (which is where Epson tell you to go). I installed some drivers and the printer started to print it was doing some strange things like printer two lines of the same single line, missing the top off the letters and putting two line spaces in between each line.
I am all new to this but does anybody advice or even provide step by step instructions on how to install the printer (if they have this model printer themselves).Also how to I remove the drivers that I installed last night that obviously are incompatible?
View 1 Replies
View Related
Feb 24, 2010
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
View 5 Replies
View Related
Jun 18, 2010
I newing to utilize linux I want to ask I install redhat enterprise 4 4 on laptop acer aspire 4736, and all hadware I am not detected comprise wifi card and lan card. how detects my hadware that? one again of making ad-hoc at ubuntu 7.10
View 2 Replies
View Related
