I just installed oS11.3 on a new Aspire Revo R3610 which has the Intel Atom 330 chip and Nvidia ION graphics.
I noticed that the CPU is always running at 1600Mhz and doesn't throttle down when there is no load. Do the Atom cpus not throttle down or is there a setting in 11.3 that I can change?
I installed the 64bit of oS 11.3.
I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.
I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).
I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.
I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?
My Acer Aspire Revo 3700 installed fine. I did the commands on this page to prevent the system from hanging on shutdown and reboot, and it went fine.
Against my better judgement, I allowed the system to install a new nvidia driver a couple days ago. Some other stuff was updated as well, so I don't know where to pin the problem.
The Problem: Now, when I shutdown or reboot the system, the system hangs with the Ubuntu logo on screen.
Copy of my dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[Code].....
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies View RelatedIs it possible to install XBMC onto Ubuntu Lucid and still have passthrough audio to a connected receiver (i.e. a workaround with Pulse)? I have an Acer Aspire Revo R1600 connected via HDMI to my Onkyo reciever. I am able to get desktop sounds and play MP3 files from XBMC, but passthrough has been a bear. If I tell Pulse that my sound device is analog, for some reason I can get XBMC to pass through audio. However, I would like to keep system sounds and have the passthrough ability if it's possible. As I understand it (from about two weeks of fidgeting) this is a limitation of Pulse and it's lack of pass through support. It seems so simple. I've tried multiple different .asoundrc configirations none of which have gotten me there. I've upgraded Alsa. I'd rather not run XBMC live if I dont have to. I'd like to have the ability to have a workstation for when I need it. I've upgraded to the latest NVIDIA driver available from their website - 195.36.31.
View 9 Replies View Relatedwhen I connected to the L32 HDTV over the HDMI cable, picture came up, and I thought great, plug & play. But the title bar and taskbar were missing and I soon learned that this cheap Vizio TV has a native resolution of 1366x768 and simply upscales and chops off what it considers "overscan" when you drive it at the proper 720p 1280x720. To add to the problems, it doesn't report the correct EDID modes (look at your /var/log/Xorg.0.log to see the probes or install and use the read-edid package) so 1366x768 isn't an option out of the box. I spent days mucking around with /etc/X11/xorg.conf with custom Modelines, strange options and copying confs from other threads, trying to get it working at 1366x768 or 1360x768 or 1368x768 (some variations seem to work for some people)
In the end, I didn't have to touch xorg.conf at all =) All I had to do was install the newer NVIDIA 195 drivers!!! Then you get the lovely Overscan Compensation slider in nvidia-settings, and all is well. First, you will have to apt-get remove the old drivers (probably -185 or -180). Install apt-show-versions for an easy way to do that. I had a bunch of junk, I just removed all packages that had nvidia-someversionnumber in the package name.
[Code]...
i bought this computer yesterday and the wireless network isn't working. I read that a right click on the network manager icon (top right) should show a list of the available wireless networks, but for me none appear. Ive tried to manually connect to the network by putting the IP address etc, but this still doesn't work. I have been able to connect to the internet but with an ethernet cable. the wireless card is the Atheros AR5001. This is my first time using linux and any help would be great.
View 12 Replies View RelatedI installed the xbmc live linux distro on a revo aspire. It's basically a stripped down version of 9.10. It installed fine the first time, but somehow the OS got corrupted (i'm not entirely sure how) and it didn't have the ability to sleep or shut down without being manually powered off. Now when i use a bootable usb drive that i tested on another laptop, it sees the usb drive but when i select it the computer just boots to the hd instead. Is there a way to force boot off a drive? or has anyone seen something similar to this?
side note: when i try to shut down, the computer drops to cli with the user xbmc-gbr and i can shutdown the computer from there (shutdown -h now).
I just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies View RelatedI recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies View RelatedIts been a few years since I gave linux a go but having just bought an acer revo and enjoyed xbmc on myxbox I thought I would give it another go.I downloaded the 64 bit version to usb stick and got to the desktop of the live install.Everything looks great but no internet access over both wireless and ethernet.I'm used to the wireless being detected etc in windows and even though I found what must be the network manager and put in my 64 bit wep code etc it couldn't find my wireless connnection.
I thought then that mabey the preinstall ubuntu doesn't do internet.Just to see if this was the case tried it with the netbook version on this I can get ethernet access but on removing network cable no access at all.I've got an old netgear router which I am replacing soon in case thats the problem.I don't want to install ubuntu unless I can get wireless internet/network access.Being a total linux newb some of the guides I've tried to follow on the net presume I have too much knowledge.So I end up getting lost.I go into wireless connections psecify name of network (SSID ie Wireless) put in the Mac code of my router and the 64bit WEP key. I don't touch the lpv4 and 6 settings as don't know what they do Still no joy
I wonder if anyone out there has a revo 64 bit version of ubuntu working and could help mme find my wireless connection.Just an update I reput the settings into the netowrk manager and it worked although very slow.Is this because its a live install. I'll now try it with ubuntu 64 bit and see if I can get access...I seem to be getting there although very slow
xbmc 9.11 HTPC (confluence skin) on an acer revo 3610 running ubuntu 9.10 can someone possibly help me as I cannot get WOL to work. Went into BIOS under power management and enabled WOL.I have used this guide to set up. HOWTO: Set your system up for Wake On LAN (WOL my ipconfig is
Quote:
xbmc@xbmc-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 90:fb:a6:2c:b2:1f
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::92fb:a6ff:fe2c:b21f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I then tried to follow this guide HOW-TO set up Wake-On-Lan (Ubuntu) and followed those steps also still nothing. I deleted this script however as it did nothing and didnt want to have two scripts that might be interfering with each other.How can I check that the magic packs are being received by the computer? I think it has something to do with the MAC address but Im a linux noob and gettng kinda lost now, ANY help would be much appreciated. I also have a another linux computer hooked up on the network to test however I want to WOL via the internet incase I am traveling and need to wake up my htpc. Can anyone please help me as I think I have the scrips installed and Im just not doing something simple like configuring the magic packs correctly to send the information.
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
Had the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
I'm running the latest version of Ubuntu, and have upgraded the NVIDIA drivers to the latest ones from the website (not sure if that's part of the problem). I've got XBMC installed and it seems to be working, but I can't for the life of me get anything but Stereo passed over HDMI, according to my Onkyo 606 amp that is anyway.Can anyone tell me if it's actually possible, or if they've actually managed it, to get surround sound playing over HDMI on an ACER Revo running Karmic?
View 1 Replies View RelatedI've just been setting up my new Revo with Ubuntu for use as a HTPC with XBMC etc..
Previously I had audio coming out through HDMI, but now I have lost all devices under the sound settings.
I was using alsa mixer, is there any way of getting this working again? A HTPC without sound is a bit useless!
I can't really say what I've done, as I took a few approaches to it, but I've tried to remove everything so it's back to normal. I think maybe it happened after updating some NVIDIA drivers..
I need a new web cam to work under currently 10.04 but by the end of the week 10.10! Anyway the revo is not that powerful specs here:
Processor: Intel Atom Dual Core 330 1.6GHz
Memory: 2GB
Graphics Card: nVidia ION
good cams that work well on the revo's low power?
I've just installed ubuntu 11.04 on my recently purchased acer aspire revo 3700. After completing the initial install of ubuntu, running all available critical and recommended updates, and installing and activating the 3rd party driver for the nvidia card I'm having trouble. I am getting good video through the hdmi cable to my sony bravia 32" tv, but no sound (sound works fine in regular tv or xbox use).
I'm relatively inexperienced with linux so I'm not entirely sure what information would be relevant and helpful to assisting me with deciphering this issue, but I will do my best.I've found no proprietary driver for sound through the nvidia ion processor, only one for the graphics arm. I would assume they are sharing a driver, but as its not stated I cannot be sure. The 'additional drivers' control panel calls it the 'NVIDIA accelerated graphics driver (version current)' The chip is the nvidia GT218-ION. Settings in sound preferences are high definition audio controller digital stereo (hdmi) selected for output.
results from aplay are:
UR@UR-Acer:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
[code]...
Ultimately nothing so far has worked. I'm not getting any sound from any application or the sound tests in the preferences hardware tab.
How big does the USB stick need to be? I'm using the ubuntu 9.10 Live download (706mb)
View 3 Replies View RelatedI have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
I have a Laptop PC Acer Aspire 1710 and OpenSuse 11.2 installed on it I tried to setup my wifi card but it doesn't workI checked the log system log file.Apparently the driver cannot be loaded :
<6>[ 8.556483] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>[ 8.560204] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
<6>[ 8.581966] cfg80211: Calling CRDA to update world regulatory domain
[code]...
Can I Overclock my CPU from Linux? In Windows I Can use Sysclock but is there anything in linux that can increase the clock speed of the CPU.
View 2 Replies View RelatedI'm absolotly not sure, if I'm right here. During start I see the message "unknown (unsupported) BIOS version Acer/Aspire 6920/V1.14 , please report, aborting!"but I did not found any Mail or URI, where I can report this one. So I paste the partof the boot.msg here. Hopefully it will be on the right place. If not :
Acer-6920:/var/log # cat boot.msg |grep 8.82
<4>[ 0.038082] [<c0208056>] show_trace+0x26/0x40
<4>[ 0.185822] [<c048ef1c>] acpi_tb_load_namespace+0x6e/0x136
<4>[ 0.185827] [<c048effa>] acpi_load_tables+0x16/0x4b
[code]...
I have installed Ubuntu 10.10 64bit on Acer Revo 3700. After a month of debug sessions and reading the threads in this forum, I still haven't got the audio working on HDMI. Strange thing is that, the HDMI works without any problem on Windows 7 (but alas, the 1080P graphics quality is very poor) The audio output is set to HDMI in the "Sound" settings. The audio is not muted and is set to full volume. I'm using Alsa version 1.0.23 with latest nVidia drivers on Ubuntu I went through the below thread:[URL]but it did not help me either.I've attached most of the command outputs and content of my ~/.asoundrc (as per thread #1670681)
View 1 Replies View RelatedI haven't done Linux since before it had Wireless support, and have never had to tinker with network settings, so I am at a loss.My searching may be weak, but when I tried, I found nothing relevant except to determine some of the things usually asked for in threads of this nature.The symptom is very slow connection when using wireless, but it does fine when I hardwire it. Using Windows 7 on the same system it flows nicely.
View 4 Replies View RelatedI have an Acer 4810T laptop with Intel graphics. I run openSUSE 11.3, and am about to upgrade to 11.4. But both systems still have a very bad bug with screen brightness. The Fn+Arrow keys do change screen brightness, but after using them the system is rendered extremely sluggish and unresponsive. This sluggishness is most pronounced with a very important Wine app I need to use. The only way to fix the sluggishness is to reboot. With 11.4, the problem is worse because the system boots and automatically partially dims the screen, thus making it even more necessary to change the brightness. Neither Gnome nor KDE are able to change the brightness via their power managers. This means that I can't dim my screen automatically upon disconnecting the A/C power.
I have read many experiences from Ubuntu and openSUSE users, who all have the same problem. I have tried both intellegacy and the new intel drivers, and they both have the problem. I have read that some users have improved the situation by upgrading or downgrading the BIOS. Others have been experimenting with kernel patches:
[URL]
i tried to install ubuntu 9.10 in my acer aspire lap. i got the ubuntu CD by parcel.i was able to select the language, then second option -install ubuntu also went rite, after that nothing is happening. how can i correct it?
View 3 Replies View Relatedi have a acer aspire one ssd version. and have installed ubuntu 10.04, and my webcam has stopped working.
it always used to work in 9.10. but has now programs such as cheese says that i do not have a camara plugged in.
now the thing is im bit of a dumb girl when it comes to computers. Apparently I need to install some Java software just to get my pictures on my facebook. I have tried following the instructions at Java but i am a total newbie lol
I was hoping some of the boys here could help me , I did try look at some other threads but I just get even more confused. Please dont be mad if this is a dumb question coz some of us are not as smart as you guys here. I am also looking forward to making new friends here if you on facebook xx xx lol
i bought an Acer aspire one through an official acer website and i got it for cheaper than a XP one, i got it with Linux on it. As i am someone that looks for a great deal. i took it, I then realized that Linux is pretty hard to operate.can i replace linux with window?
View 3 Replies View Related
