OpenSUSE Install :: Window Managers Won't Start When Logging In From Kdm
Jul 12, 2010
slash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
View 1 Replies
ADVERTISEMENT
Mar 20, 2011
I've installed Openbox from the repo and when I log out of gnome and go to log into openbox, GDM restarts. It does this with IceWM too, and even TWM. Am I missing something? A config file that needs modified?
View 9 Replies
View Related
Jan 23, 2011
Does anybody here has made experiences with tiling-WMs ?
- Are there any in our repos, and there?
- Do they run under the normal DE,or only solo?
- Can I use all programs with them?
Actually,I am using openSuse 11.3 with KDE 4.4.
View 9 Replies
View Related
Nov 3, 2010
I would like to try KDE and XFCE alongside the Gnome desktop but I cannot seem to find an easy way to simply install them. Add/Remove Software is completely useless with this.
View 14 Replies
View Related
Nov 25, 2010
I just installed Enlightenment from slackbuilds, but I'm not sure how to change over to it. Not trying to permanently switch to E, just wanting to play with it some, and use it when I need to free up resources from KDE4. How can I switch between the two?
View 3 Replies
View Related
May 10, 2011
I'm trying to figure out how to add enlightenment to my window manager list in kdm.
View 2 Replies
View Related
May 7, 2011
I'm having trouble starting non-kde window managers. From the start-up command line, I get an error message about the XServer when typing "fluxbox" in as a command. However, when I put fluxbox in as a command in konsole, it gives an error message (which makes sense because I was using kde). I also can't start xfce as it is not a recognized command.
View 8 Replies
View Related
Jul 7, 2010
In Ubuntu or Fedora I would install wine from their software managers then simply see it with my applications so I could use it. however I installed it on Suse but dont see it anywhere, in software manager it says its installed- so what am i missing.
View 9 Replies
View Related
Jan 6, 2011
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
View 2 Replies
View Related
Nov 1, 2010
I'm deciding to go with a window manager instead of a desktop environment. I want to go simple and lightweight, and I know a lot of you run window managers such as openbox, fluxbox, and some tiling ones like xmonad, awesome and dwm. I want to give xmonad a try. For those of you who run tiling window managers, how do you know what is running in the background? There is no system tray in a screenshot such as this: [URL]. I'll be playing around with xmobar because that seems to be a popular panel with xmonad, and that's what's in that screenshot.
Also, how do you run your programs? You don't run it always from the command line, do you? When I want to run Chromium, I have to start up a terminal and load it that way, having the terminal and the browser open when using the browser. I know other window managers like openbox provide a right click menu, but xmonad doesn't (or does it?). I know a lot of people who use tiling window managers also use a lot of console apps, and I like that feel, but I don't think I'd want text for everything, such as the web.
View 14 Replies
View Related
Aug 8, 2010
I'm in Gnome but if I logout I can get to a menu where I can choose KDE as well as other window managers. The problem is I have a program that's running inside Gnome and I don't want to stop it. Is there some way I can get into KDE without having to stop this program?
View 3 Replies
View Related
Dec 29, 2010
As the title says I am looking for window managers that support having a workspace per screen. Now I'm not talking xrandr, twinview, xinerma or anything. I don't think this feature is possible with metacity. Most tiling window managers are like this and I love it, it makes things so much more efficient.
View 1 Replies
View Related
Feb 8, 2011
I tried Docky and then uninstalled it. Then got a notification on a missing library item asking if I wanted to delete association. Now I have no open program tabs on my panel. So how do I get them back? And are there other program window management programs that might be of interest? If it matters, I'm using Ubuntu Studio.
View 2 Replies
View Related
Sep 9, 2010
I tried to follow some internet instructions on how to disable the wheel click (that paste the clipboard contents) but I still can't make it work. I tried to add a button mapping to X11 conf file:
Option "ButtonMapping" "1 1 3 4 5"
I also tried by creating a hal policy:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2"> <device>
<match key="info.capabilities" contains="input.mouse">
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.x11_options.ButtonMapping" type="string">1 2 3 4 5 0 0 0 0 0 0 0</merge>
</match> </match> </device> </deviceinfo>
But nothing seems to disable the wheel click.
I am using Xfce 4.6.1 with Slackware 13.0. My Mouse is a Microsoft. IntelliMouse USB PS/2 compatible.
View 2 Replies
View Related
Apr 26, 2010
I've tried KDE, XFCE & fluxbox (this latter of which I think I prefer). They all work but they all have similar streaks & distortions on the GUI. Is this certainly a driver issue?
Also, after using them for a while they freeze.
In an earlier thread dc_eros suggested installing the latest openchrome, which fixed a similar problem he had with his first slack13.
View 9 Replies
View Related
Jun 9, 2010
I often swapped window managers between fluxbox kde and gnome back when I ran ubuntu to suit my needs. When I installed slackware, I picked KDE because of the convenient app suite. I don't wish to uninstall kde but I'd like to be able to pick which environment I use when I swap to a GUI. Something like a flag, startx --fluxbox.
View 2 Replies
View Related
May 19, 2010
I have followed to the letter the wiki HowTo on setting up VNC and it works (sort of). I get a VNC session (doesn't matter whether I connect locally, over ssh, or using a vnc client), but all I get is the dreaded black screen with an xterm top left. If I then execute 'startkde' from within the xterm I get my normal desktop up. What I am however getting, is a new desktop session. And this happens each time I start a vnc session. I.e. I end up with a LOT of user sessions for my username. (As shown up by a 'users' cmd.) Consequently, each new time I start a vnc session, I get <x> (representing the previous nr of vnc logins) number of xterm windows + 1 appearing. I never get the logged on session.
However I've also noticed my .xsession-errors file filling up. I've googled around enough to get the impression that the reason I'm not getting the logged-on session up in vnc is due to a missing window manager. but haven't hit on the right google combo to fix the issue. I can believe there being a missing window manager due the following related story;About a year ago, I went to switch from KDE to Gnome. Decided I didn't want to and then set out to switch back to KDE. Each time I installed/uninstalled via the GUI "Add/Remove Software". Eventually I got back to KDE and it appeared to work since, so I left well enough alone.t is only now attempting to set up VNC, I have come across all these issues. I firmly believe VNC will work as expected if I can resove the apparent missing window manage issue.xstartup
#!/bin/sh
# Ensures an xterm is always available
( while true ; do xterm ; done ) &
[code]....
View 11 Replies
View Related
Oct 31, 2010
I dislike dependency ridden applications or applications that do something useful designed for a specific window manager. So I am starting a thread specifically for requests for applications in Gnome and KDE that aren't immediately available in XFCE, Fluxbox,Blackbox, IceWM, LXDE etc. For instance, I am personally creating a graphical sudo application for the lesser window managers. What other applications would you like to see? this is NOT a request for applications for Linux is general, ONLY ones already available in Linux.
View 1 Replies
View Related
Mar 17, 2010
I've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm.
Its hard to explain, so please see the screenshots: [URL]
Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
View 7 Replies
View Related
Feb 18, 2010
Kde 4.3.1 started booting slow, real slow, real slow.. and logging out real slow. I tried un-instsalling everything since my last update. I then tried moving to the kde 4.3.5. Same problem. Any clues or should I just do reinstall? I am running a ACCER laptop Intel(R) Celeron(R) CPU 550 @ 2.00GHz. I have been using Linux for 10yrs.
View 5 Replies
View Related
Dec 17, 2010
I have a problem loging into SUSE 11 64 bit as well as 32 bit. While installing it doent ask me for the ID and password. I tried to install the OS twice...but again it doent asked me anything.
View 6 Replies
View Related
Dec 3, 2010
I've noticed on other Linux distributions that after boot up and logging off the console screen clears and provides basic information like the Linux distribution and then under it the login prompt. How can I do this for openSUSE 11.3?After I install or reboot I still have all the boot up stuff shown and when I logout after performing some work my commands are still shown. I boot the system to runlevel 3 and barely use the GUI but would like the screen to clear everything after boot up and logging out.
View 6 Replies
View Related
Apr 29, 2011
I'm using opensuse 11.4 kde 4.6. When I (try) to start libreoffice, splash window appears but program doesn't start.
When I launch it from console as normal user i don get any clue, but as root user i got this:
Code:
I run "export $(dbus-launch)" and libreoffice works, but only launching it as root user.
View 4 Replies
View Related
Jan 27, 2010
Since update yesterday to kde4.3.5 I notice this am - after logging in with password the loading desktop stalls. In cat /var/log/messages I grabbed part that seems possible.
Jan 28 03:17:39 SUSE11-2 SuSEfirewall2: Firewall rules successfully set
Jan 28 03:17:42 SUSE11-2 kernel: [ 70.264865] bootsplash: status on console 0 changed to on
[Code].....
View 1 Replies
View Related
Apr 17, 2011
My install of 11.4 has been running perfectly for for several weeks now. But- (always a but) today it started acting up. I cannot log in to any user account including Root after logging out. After a cold boot I can log in again anywhere but after logging out I have to reboot again then I can get back in to any account once. After logging out any attempted log in causes the splash screen to blank for a few seconds and then it comes back with the previous successful user name log in but typing in the password blanks the screen a few seconds again. Clicking on a user account also blanks the screen a few seconds and then it again comes back with the previous log in users name.
View 1 Replies
View Related
May 7, 2011
I have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
View 6 Replies
View Related
Sep 1, 2011
I just recently switched to openSUSE 11.4 from Ubuntu 10.10 so I am very new to this distro and Linux in general. My question is this.Is there a way to make it so that I don't have to keep entering my root password in order for the OS to connect to my wireless?Every time I login the KDE Wallet Service pops up and asks for my passwordI know that it is there for security and what not but it'd be nice if I could just login and the laptop connects to the point without needing a password every time
View 1 Replies
View Related
Feb 7, 2010
Newly installed Debian system from years with Fedora. Ran system update and system got hosed, booted but no Gnome. Got Gnome back after MANY 'aptitude upgrade's. Xemacs disappeared! Along with other things I installed. Tried to install Xemacs but it is broken and will not install, complains about dpkg TOO current(?). So downloaded Xemacs for Xemacs.org and compiled source, installed.
Now when I start Xemacs is does not run in an X window but runs emacs in a terminal window. If I run it from a script, it complains about 'not in tty window'.
My env show:
Code:
The Xemacs install on Debian ( Bug written ) Install and configuration of Xemacs from source. A better understanding of the Debian upgrade process.
View 5 Replies
View Related
Dec 23, 2015
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
View 14 Replies
View Related
Sep 1, 2010
I have a troubling issue. I log into Linux Mint 9 (fully up-to-date) on my Samsung Q320 laptop with power connected and after a few minutes it seems like the entire X session dies, I am logged out, all processes are killed and I am presented with the normal GDM login screen. When I first installed Linux Mint, this never happened. I have the NVidia closed-source driver installed and when the system logs me out, it immediately restarts X loading the NVidia driver which flashes the logo on screen. This all happens instantaneously, so it is not a reboot of the machine, just a restart of the display manager it seems.
There does not seem to be any cause for this. I have disabled all screen saver and power management settings that may lead my system to auto-logout of Gnome. The system log doesn't indicate anything unusual happening. Confused about where to to take it from here bar and fresh install of the OS. Perhaps there are some X11 logs I should be checking.
Update: Moved to Ubuntu 10.10 and its recommended NVidia driver and have not experienced this problem since.
View 1 Replies
View Related
