I would like to try KDE and XFCE alongside the Gnome desktop but I cannot seem to find an easy way to simply install them. Add/Remove Software is completely useless with this.
View 14 Replies
I've installed Openbox from the repo and when I log out of gnome and go to log into openbox, GDM restarts. It does this with IceWM too, and even TWM. Am I missing something? A config file that needs modified?
View 9 Replies View Relatedslash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
Krusader crashes immediately on start-up at Karmic. This is new. Only changes to my system lately was a routinal FSCK while booting. This is the error message I get:
"Application: Krusader (krusader), signal: Segmentation fault
[KCrash Handler]
#6 0x0808aa88 in _start ()"
I thought about trying to reset Krusader's settings. I don't know where to locate them. I would expect a .krusader folder unde my home dir, but it's nowhere to be found.
Does anybody here has made experiences with tiling-WMs ?
- Are there any in our repos, and there?
- Do they run under the normal DE,or only solo?
- Can I use all programs with them?
Actually,I am using openSuse 11.3 with KDE 4.4.
I just installed Enlightenment from slackbuilds, but I'm not sure how to change over to it. Not trying to permanently switch to E, just wanting to play with it some, and use it when I need to free up resources from KDE4. How can I switch between the two?
View 3 Replies View RelatedI'm trying to figure out how to add enlightenment to my window manager list in kdm.
View 2 Replies View RelatedI'm having trouble starting non-kde window managers. From the start-up command line, I get an error message about the XServer when typing "fluxbox" in as a command. However, when I put fluxbox in as a command in konsole, it gives an error message (which makes sense because I was using kde). I also can't start xfce as it is not a recognized command.
View 8 Replies View RelatedI'm deciding to go with a window manager instead of a desktop environment. I want to go simple and lightweight, and I know a lot of you run window managers such as openbox, fluxbox, and some tiling ones like xmonad, awesome and dwm. I want to give xmonad a try. For those of you who run tiling window managers, how do you know what is running in the background? There is no system tray in a screenshot such as this: [URL]. I'll be playing around with xmobar because that seems to be a popular panel with xmonad, and that's what's in that screenshot.
Also, how do you run your programs? You don't run it always from the command line, do you? When I want to run Chromium, I have to start up a terminal and load it that way, having the terminal and the browser open when using the browser. I know other window managers like openbox provide a right click menu, but xmonad doesn't (or does it?). I know a lot of people who use tiling window managers also use a lot of console apps, and I like that feel, but I don't think I'd want text for everything, such as the web.
I'm in Gnome but if I logout I can get to a menu where I can choose KDE as well as other window managers. The problem is I have a program that's running inside Gnome and I don't want to stop it. Is there some way I can get into KDE without having to stop this program?
View 3 Replies View RelatedAs the title says I am looking for window managers that support having a workspace per screen. Now I'm not talking xrandr, twinview, xinerma or anything. I don't think this feature is possible with metacity. Most tiling window managers are like this and I love it, it makes things so much more efficient.
View 1 Replies View RelatedI tried Docky and then uninstalled it. Then got a notification on a missing library item asking if I wanted to delete association. Now I have no open program tabs on my panel. So how do I get them back? And are there other program window management programs that might be of interest? If it matters, I'm using Ubuntu Studio.
View 2 Replies View RelatedI tried to follow some internet instructions on how to disable the wheel click (that paste the clipboard contents) but I still can't make it work. I tried to add a button mapping to X11 conf file:
Option "ButtonMapping" "1 1 3 4 5"
I also tried by creating a hal policy:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2"> <device>
<match key="info.capabilities" contains="input.mouse">
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.x11_options.ButtonMapping" type="string">1 2 3 4 5 0 0 0 0 0 0 0</merge>
</match> </match> </device> </deviceinfo>
But nothing seems to disable the wheel click.
I am using Xfce 4.6.1 with Slackware 13.0. My Mouse is a Microsoft. IntelliMouse USB PS/2 compatible.
I've tried KDE, XFCE & fluxbox (this latter of which I think I prefer). They all work but they all have similar streaks & distortions on the GUI. Is this certainly a driver issue?
Also, after using them for a while they freeze.
In an earlier thread dc_eros suggested installing the latest openchrome, which fixed a similar problem he had with his first slack13.
I often swapped window managers between fluxbox kde and gnome back when I ran ubuntu to suit my needs. When I installed slackware, I picked KDE because of the convenient app suite. I don't wish to uninstall kde but I'd like to be able to pick which environment I use when I swap to a GUI. Something like a flag, startx --fluxbox.
View 2 Replies View RelatedI have followed to the letter the wiki HowTo on setting up VNC and it works (sort of). I get a VNC session (doesn't matter whether I connect locally, over ssh, or using a vnc client), but all I get is the dreaded black screen with an xterm top left. If I then execute 'startkde' from within the xterm I get my normal desktop up. What I am however getting, is a new desktop session. And this happens each time I start a vnc session. I.e. I end up with a LOT of user sessions for my username. (As shown up by a 'users' cmd.) Consequently, each new time I start a vnc session, I get <x> (representing the previous nr of vnc logins) number of xterm windows + 1 appearing. I never get the logged on session.
However I've also noticed my .xsession-errors file filling up. I've googled around enough to get the impression that the reason I'm not getting the logged-on session up in vnc is due to a missing window manager. but haven't hit on the right google combo to fix the issue. I can believe there being a missing window manager due the following related story;About a year ago, I went to switch from KDE to Gnome. Decided I didn't want to and then set out to switch back to KDE. Each time I installed/uninstalled via the GUI "Add/Remove Software". Eventually I got back to KDE and it appeared to work since, so I left well enough alone.t is only now attempting to set up VNC, I have come across all these issues. I firmly believe VNC will work as expected if I can resove the apparent missing window manage issue.xstartup
#!/bin/sh
# Ensures an xterm is always available
( while true ; do xterm ; done ) &
[code]....
I dislike dependency ridden applications or applications that do something useful designed for a specific window manager. So I am starting a thread specifically for requests for applications in Gnome and KDE that aren't immediately available in XFCE, Fluxbox,Blackbox, IceWM, LXDE etc. For instance, I am personally creating a graphical sudo application for the lesser window managers. What other applications would you like to see? this is NOT a request for applications for Linux is general, ONLY ones already available in Linux.
View 1 Replies View RelatedI've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm.
Its hard to explain, so please see the screenshots: [URL]
Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
I've installed Fedora from the Live CD (Fedora 13). The Installation Guide says that if you install from the DVD (or, as I understand it, the five or so CDs) you get the choice of installing lots more software. I've now got a copy of the CD. But how do I use it to install the extra software it contains? The Installation Guide says use the Add/Remove Software tool. But that tries to download stuff from the Internet. Nothing about installing from the DVD.
View 4 Replies View RelatedI installed FC14 on my Lenovo Thinkpad T410.
I want know if is possible to install additional graphics driver and how to.
I need to run a proprietary VPN client (Aventail) that can't use the openssl libraries that are packaged with 64bit F10:The Fedora openssl package does something differently from the original openssl.org package that makes it incompatible with Aventail (see bugzilla ticket 477073) I also believe the Aventail client software requires 32-bit libraries. So, I've determined I need to install 32bit openssl directly from openssl.org, then link my Aventail client to that. Note that I don't want to replace the 64bit openssl libraries currently on my system.
Based on the Bugzilla ticket, I believe I know how to hook up Aventail before I install it simply by supplying a few specific soft links if I can make/compile/whatever the 32bit openssl.org libraries and keep them in their own isolated directory. how to get the 32bit openssl libraries installed in a little corner by themselves on my 64bit system. give a step-by-step on on the commands necessary to place a 32bit version of openssl all by itself in a directory of my choosing?
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
In Ubuntu or Fedora I would install wine from their software managers then simply see it with my applications so I could use it. however I installed it on Suse but dont see it anywhere, in software manager it says its installed- so what am i missing.
View 9 Replies View RelatedI'm looking for a way to install kdebase 4.7 with no additional dependencies. My target is home desktop and I only want these : kdm, plasma, ark, dolphin, kdesu, konsole, okteta, kwrite, kate, kmix, ksnapshot. There are things I don't use but they get installed anyway and break kdm if removed. These things are : akonadi, strigi, nepomuk, virtuoso, kfind, kgreeter and a couple of others, including libqtzeitgeist0 and PIM in general. Also I don't want kdm 4.7 features hence I use kdm3 as a login manager. Is there a 4.7 build that doesn't mind the removal of so called base components? If not, is there a 4.4 repo for 11.4?
View 9 Replies View RelatedAfter I upgraded from 9.10 to 10.4 I could see Ubuntu One in the Places menu. (and subsequently have access to my files etc there).I have now installed 10.4 on a new machine (clean install) and I don't seem to have access from 'Places' now. The only way I can get to it is via a web browser.Is it just hidden away somewhere? Or do I need to install some additional packages?
View 1 Replies View RelatedAfter a recent update, when ever I attempt to open a ".ogv" extension from within Dolphin File Mananger in KDE4.4.2, I get a window that pops up every time for Checking For additional Software to install. It does this in spite of the fact I already have several players and the default set to SMPlayer to play the files. How do I turn this behavior off? It's really annoying because you either have to wait for it to finish checking (and finding nothing BTW) or Cancel it in order to play the file. This just started recently. I don't see anything obvious in Dolphin configuration, but I'm not even sure it's related to Dolphin at all.
View 9 Replies View RelatedI got to go to a competition and I have to use debian and win server 2008 in that comp. With the smallest (about 300MB) image, I couldn't add functions because the computer isn't allowed to connect internet, no APT. then, do I need to download all the images? I saw that full image was really huge.
View 3 Replies View RelatedI recently migrated from Ubuntu 10.10 to Opensuse 11.3
I sometimes need lxsplit to join splitted files.
In Ubuntu I installed lxsplit from the repos but I can't find it in the Add/Remove software, here in opensuse.
Do I need to enable any additional repos to install lxsplit?
I have seen how simple it is for Mac OS to generate pdf from a document without additional software to install. But I am looking for this functionality in Linux. One scenario, for example, if I have myDocument.txt that contain an article, how can I convert this into pdf? My next question is, assuming that myDocument.txt is a 3-paged document, will it generate a 3-page continuous pdf and not just 3 separate pdfs?
Any tools for linux that does this? (GUI is fine, but commandline is preferable)
wanted to try kubuntu without all the additional programs how to install it?
View 1 Replies View Related
