Since update yesterday to kde4.3.5 I notice this am - after logging in with password the loading desktop stalls. In cat /var/log/messages I grabbed part that seems possible.
Jan 28 03:17:39 SUSE11-2 SuSEfirewall2: Firewall rules successfully set
Jan 28 03:17:42 SUSE11-2 kernel: [ 70.264865] bootsplash: status on console 0 changed to on
[Code].....
I have a problem loging into SUSE 11 64 bit as well as 32 bit. While installing it doent ask me for the ID and password. I tried to install the OS twice...but again it doent asked me anything.
View 6 Replies View RelatedI'm installing 11.4 KDE on an Acer D255 Netbook. (dual core Atom, 1Gb RAM)
The OS runs perfectly on this PC when booting from a thumb drive, but when I install to the HDD I can't get to a GUI desktop.
If I boot "normally" I just get to a CLI with a white background in the upper left 1/4 of a black screen. It appears that it's using init 5, just no desktop. (the installer added boot option vga=0x314, I tried booting both with and without that option, and I tried nomodeset too just for chuckles, no luck.)
If I boot to Failsafe Mode I can get to a GUI desktop (boots to init 3 then I go to init 5 and startx.)
The basics: Ubuntu 10.04 Lucid x64 with Firefox 3.6.11 on a Thinkpad T61p 2gb ram/500gb HD. When I try to access my email via Squirrelmail, Firefox hangs on loading. If I stop the page from loading, wait a few minutes, then try again, I have a 50:50 chance of it loading this time.
I've run the update to make sure I have the most recent versions of software, but it still hangs. I've tried a few cursory searches, but find nothing referencing Lucid or that is otherwise current.
I have installed OpenSuse 11.4 as a Xen guest on a host system running SLES11 and it gets stuck just as it reaches run level 3. I can ping it and various network ports are open but the virtual text console is unresponsive and I cannot ssh to the machine. Port 10080 (Amanda backup) is also open but not functioning properly. The odd thing is that this problem happened when I first installed the guest and then went away only to reappear when I rebooted after installing the latest kernel via Online Update.
Here are the last few messages on the console:
Starting NFS client services: sm-notify idmapd..done
Mounting network file systems ...Starting rpc.statd .....done
..done
Starting sound driver..done
..done
Starting irqbalance ..done
Starting java.binfmt_misc ..done
Setting up (remotefs) network interfaces: .....
Here are the last few messages from ssh:
debug1: Authentications that can continue: publickey,keyboard-interactive,hostbased
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/bobv/.ssh/id_rsa
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug1: Authentication succeeded (publickey).
Authenticated to stafflinux ([134.219.205.140]:22)
debug1: channel 0: new [client-session]
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session.
Note that I have set RUN_PARALLEL="no" in /etc/sysconfig/boot
I have console=xvc0 as a kernel startup parameter. How I might debug this?
I have installed successfully a couple of times... But not today! I have a Gateway Solo 5300 384 MB RAM.penSUSE 11.1 on CD. When I attempt an install it seems to be successful (I watch the logging) then it comes to what I presume is the enter your options screen and the video scrambles. Then it cycles through what seems to be 3 scrambled screens. The first screen is always the same, the second screen is different each time
View 1 Replies View RelatedI want to give my users option of logging to the system. They should have posibillity for choosing option betweend logging to the system with their default password or one-time password OTPW. I installed OTPW in my Debian. Here is my /etc/pam.d/sshd file:
[Code]....
hello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
View 9 Replies View RelatedI've downloaded Ubuntu 10.04 from the UK mirror of the Ubuntu site. When I try to install the OS from the CD it stalls at various different places. I have been able to get it to a max of 25% of installation before stalling, but more often than not it stalls when I'm trying to choose the keyboard type, or when I'm trying to setup my username / PC hostname.
I've carried out an md5sum on the iso and it shows no errors. I've downloaded the iso a second time and carried out the same check, and similarly no errors.
I Just Installed Opensuse 11.3 on Dell INSPIRON N5010 laptop in dual boot with windows 7 installed.The laptop boot up(OpenSuse GUI is seen during boot) to run level 5 with only two errors;1. Failed service in runlevel 5 nscd2. Skipped services in runlevel 5 cif nfs.there after it give me a login in in like command line(no GUI mode loaded but on the background I see the OpenSuse Icons like the desktop was loaded), I can login in a that command line and get the laptop receive IP and do other service like ssh/telnet and other command line functionality but I don't have the KDE4 Desktop to allow me launch applications in GUI mode
View 9 Replies View Relatedbeen using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
Kde 4.3.1 started booting slow, real slow, real slow.. and logging out real slow. I tried un-instsalling everything since my last update. I then tried moving to the kde 4.3.5. Same problem. Any clues or should I just do reinstall? I am running a ACCER laptop Intel(R) Celeron(R) CPU 550 @ 2.00GHz. I have been using Linux for 10yrs.
View 5 Replies View Relatedslash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
I've noticed on other Linux distributions that after boot up and logging off the console screen clears and provides basic information like the Linux distribution and then under it the login prompt. How can I do this for openSUSE 11.3?After I install or reboot I still have all the boot up stuff shown and when I logout after performing some work my commands are still shown. I boot the system to runlevel 3 and barely use the GUI but would like the screen to clear everything after boot up and logging out.
View 6 Replies View RelatedI work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
My install of 11.4 has been running perfectly for for several weeks now. But- (always a but) today it started acting up. I cannot log in to any user account including Root after logging out. After a cold boot I can log in again anywhere but after logging out I have to reboot again then I can get back in to any account once. After logging out any attempted log in causes the splash screen to blank for a few seconds and then it comes back with the previous successful user name log in but typing in the password blanks the screen a few seconds again. Clicking on a user account also blanks the screen a few seconds and then it again comes back with the previous log in users name.
View 1 Replies View RelatedI have Open Suse 11.3. I normally use GNOME or KDE sessions. Yesterday I was just thought of trying other Desktop Environments. so I logged out to choose a different session. I tried LXDE and logged back out. After that I found "metacity" in the sessions list and tried it. But no desktop appeared. All I got is black screen a with the mouse pointer/cursor. I waited for quite some time but no desktop, panel, etc loaded or was visible.
I could not figure out how to log off so I hit the start button. After reboot the system automatically chose the same session (It always reuses the last used session) and I was in the same sticky situation. I tried starting in Safe mode as well but still I get the same black screen with just the mouse pointer.
I just recently switched to openSUSE 11.4 from Ubuntu 10.10 so I am very new to this distro and Linux in general. My question is this.Is there a way to make it so that I don't have to keep entering my root password in order for the OS to connect to my wireless?Every time I login the KDE Wallet Service pops up and asks for my passwordI know that it is there for security and what not but it'd be nice if I could just login and the laptop connects to the point without needing a password every time
View 1 Replies View RelatedI am having some trouble logging into my machine: it seems to not accept my password. I am fairly sure I am typing it correctly. I can work around it easily enough by logging into the console and changing the password, but it is annoying.
View 6 Replies View RelatedAny idea how to log a user in without a password in GDM? I've found this archived thread but it doesn't appear to do anything when I tried what it says: [URL] I'm not looking for auto-login. I'd simply like one user to be able to click on his name and it will log in without prompting for a password.
View 3 Replies View RelatedI have 11.3 Gnome installed on a Dell Optiplex380, and I can fully shutdown, but the system hangs when I try to Restart. The Geeko logo is there and the white bar retracts, once it hits all gray it stays there until I force a hard-shutdown holding the computer power-button.What steps can I take to fix this or start troubleshooting?
View 3 Replies View RelatedI've noticed this weird behavior where kTorrent would just stall downloading stuff if left on its own for a few hours. Once you activate kTorrent window from the panel it just gets on with the job, changing status from "stalled" to "downloading" in a few seconds.
Could it have something to do with the external disk I'm downloading on (some of the downloads, not all) being physically different one and connected via usb but mounted in a home directory?
I suspect this because Windows machine connected via samba also loses connection after a while as if there's some "time expiration" set on mounting drives into home.
Here is the fstab line for the suspected mount:
/dev/disk/by-id/usb-Seagate_FreeAgentDesktop_3QK0A0N7-0:0-part1 /home/stan/Seagate ext2 acl,user_xattr 1 2
I'm trying to use Gnome's built in remote desktop viewer, Vino, to remote to my PC. When I use the vnc client on another computer to get to my OpenSuse 11.1 box, it lets me type in a password and pauses. If I look at the screen on my OpenSuse box it is waiting for the gnome keyring password and it wanting it for vino-preferences. It specifically says: The application gnome remote desktop (/usr/bin/vino-preferences) wants access to the default keyring but it is locked.
Does anybody know how to bypass needing the password for this? I'm not sure how to begin to figure this out. I've been a longtime Fedora user and vino worked fine there so I don't think this is the way it is supposed to work.
when I move the mouse to the top left it shows the 4 desktops. But I have switched it to 2 desktops, plus I also undid the screen edge section in personnel settings. How do I turn this ANNOYING feature off, as I have the tradition menu there & makes life difficult. It locks the desktop to reenter the password after 5 minutes. I turned the screen-saver off & unchecked the lock desktop setting in there also. I tried to search for these, but ever time I did it would tell me it was to generic of a search.
View 5 Replies View RelatedI'm trying to use Gnome's built in remote desktop viewer, Vino, to remote to my PC. When I use the vnc client on another computer to get to my OpenSuse 11.1 box, it lets me type in a password and pauses. If I look at the screen on my OpenSuse box it is waiting for the gnome keyring password and it wanting it for vino-preferences. It specifically says: The application gnome remote desktop (/usr/bin/vino-preferences) wants access to the default keyring but it is locked. Does anybody know how to bypass needing the password for this? I'm not sure how to begin to figure this out. I've been a longtime Fedora user and vino worked fine there so I don't think this is the way it is supposed to work.
View 4 Replies View RelatedGot latest version of ubuntu, installed skype and i keep logging in it keeps saying incorrect pw. than i made a new account and tried that, still incorrect pw?
View 1 Replies View RelatedI am trying to install opensuse 11.3 but the PC restarts itself before loading the installer dvd. When I run the installer dvd from 11.2 i can see all the files there, i click on auto run and it gives me an error msg saying cannot find autorun program also have a live gnome desktop cd and same problem, cant boot install media. This were both created on opensuse 11.2 using k3b for the first one and brasero for the second one. I have put both on an xp laptop and the installers start with no problem, both media check are fine, no error. On top of that I have some ubuntu dvd and some xp dvd, I have tried both on my pc and they boot fine, so its not a boot problem,
this ones were created on this same pc before I had opensuse, seems only cd or dvd created in opensuse fail, but it only fails when booting on my opensuse pc and work fine when I put them into xp laptop. I have been trying all day and I cant find any info on this problem. The only thing I can think of, that I have not tried is to try to burn a dvd using xp and try that one.
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
Total noob here. I am trying to install Mythbuntu 10.10 on a computer with and empty hard drive using a CD.The install start fine, I make a couple of selections to tell the installer I want to use the entire harddrive, select the timezone and the install starts without any problems. Unfortunatly after about 30min or so, the installation seem to be stalled out with the progress bar at the 85-90% range. There are no obvious errors in the log.
I have successing installed Ubuntu in the past (although not on this hardware). The PC includes an IDE based DVD-R, 120Gb sata based ssd, 939 dual core processor. 8600GT video card. 2Gb memory. One possibility is that I don't have a TV tuner card installed yet. Was going to do that after I got Ubuntu up and running but perhaps the installer is looking for a tuner card. I realize I am not giving anyone much to work but I am not sure what I could post.
I have a peer-to-peer network with 25 WinXP Pro computers. I have built a Linux (SuSE) server for the purpose of backing up My Documents, PST files and favourites. Each user has their own folder containing the sync'd files. Each folder is password protected. I have configured each users machine with a mapped 'S' drive, which is the sync'd data folder on the Linux computer. All of the computers seem to end up with a "disconnected network drive" status after either logging out for the day or after some time has elapsed. Some will connect with a double click but others prompt for a password. I have tried mapping the drive using the option "Connect using a different user name", which is fine until the user logs out and back in again. I use SyncToy as a scheduled task, but can't connect to these mapped drives automatically, so the sync process will not work unattended.
View 3 Replies View Related