I tried Docky and then uninstalled it. Then got a notification on a missing library item asking if I wanted to delete association. Now I have no open program tabs on my panel. So how do I get them back? And are there other program window management programs that might be of interest? If it matters, I'm using Ubuntu Studio.
View 2 RepliesKrusader crashes immediately on start-up at Karmic. This is new. Only changes to my system lately was a routinal FSCK while booting. This is the error message I get:
"Application: Krusader (krusader), signal: Segmentation fault
[KCrash Handler]
#6 0x0808aa88 in _start ()"
I thought about trying to reset Krusader's settings. I don't know where to locate them. I would expect a .krusader folder unde my home dir, but it's nowhere to be found.
Does anybody here has made experiences with tiling-WMs ?
- Are there any in our repos, and there?
- Do they run under the normal DE,or only solo?
- Can I use all programs with them?
Actually,I am using openSuse 11.3 with KDE 4.4.
I just installed Enlightenment from slackbuilds, but I'm not sure how to change over to it. Not trying to permanently switch to E, just wanting to play with it some, and use it when I need to free up resources from KDE4. How can I switch between the two?
View 3 Replies View RelatedI'm trying to figure out how to add enlightenment to my window manager list in kdm.
View 2 Replies View RelatedI'm having trouble starting non-kde window managers. From the start-up command line, I get an error message about the XServer when typing "fluxbox" in as a command. However, when I put fluxbox in as a command in konsole, it gives an error message (which makes sense because I was using kde). I also can't start xfce as it is not a recognized command.
View 8 Replies View RelatedAs the title says I am looking for window managers that support having a workspace per screen. Now I'm not talking xrandr, twinview, xinerma or anything. I don't think this feature is possible with metacity. Most tiling window managers are like this and I love it, it makes things so much more efficient.
View 1 Replies View RelatedI would like to try KDE and XFCE alongside the Gnome desktop but I cannot seem to find an easy way to simply install them. Add/Remove Software is completely useless with this.
View 14 Replies View RelatedI've installed Openbox from the repo and when I log out of gnome and go to log into openbox, GDM restarts. It does this with IceWM too, and even TWM. Am I missing something? A config file that needs modified?
View 9 Replies View RelatedI'm deciding to go with a window manager instead of a desktop environment. I want to go simple and lightweight, and I know a lot of you run window managers such as openbox, fluxbox, and some tiling ones like xmonad, awesome and dwm. I want to give xmonad a try. For those of you who run tiling window managers, how do you know what is running in the background? There is no system tray in a screenshot such as this: [URL]. I'll be playing around with xmobar because that seems to be a popular panel with xmonad, and that's what's in that screenshot.
Also, how do you run your programs? You don't run it always from the command line, do you? When I want to run Chromium, I have to start up a terminal and load it that way, having the terminal and the browser open when using the browser. I know other window managers like openbox provide a right click menu, but xmonad doesn't (or does it?). I know a lot of people who use tiling window managers also use a lot of console apps, and I like that feel, but I don't think I'd want text for everything, such as the web.
slash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
I'm in Gnome but if I logout I can get to a menu where I can choose KDE as well as other window managers. The problem is I have a program that's running inside Gnome and I don't want to stop it. Is there some way I can get into KDE without having to stop this program?
View 3 Replies View RelatedI tried to follow some internet instructions on how to disable the wheel click (that paste the clipboard contents) but I still can't make it work. I tried to add a button mapping to X11 conf file:
Option "ButtonMapping" "1 1 3 4 5"
I also tried by creating a hal policy:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2"> <device>
<match key="info.capabilities" contains="input.mouse">
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.x11_options.ButtonMapping" type="string">1 2 3 4 5 0 0 0 0 0 0 0</merge>
</match> </match> </device> </deviceinfo>
But nothing seems to disable the wheel click.
I am using Xfce 4.6.1 with Slackware 13.0. My Mouse is a Microsoft. IntelliMouse USB PS/2 compatible.
I've tried KDE, XFCE & fluxbox (this latter of which I think I prefer). They all work but they all have similar streaks & distortions on the GUI. Is this certainly a driver issue?
Also, after using them for a while they freeze.
In an earlier thread dc_eros suggested installing the latest openchrome, which fixed a similar problem he had with his first slack13.
I often swapped window managers between fluxbox kde and gnome back when I ran ubuntu to suit my needs. When I installed slackware, I picked KDE because of the convenient app suite. I don't wish to uninstall kde but I'd like to be able to pick which environment I use when I swap to a GUI. Something like a flag, startx --fluxbox.
View 2 Replies View RelatedI have followed to the letter the wiki HowTo on setting up VNC and it works (sort of). I get a VNC session (doesn't matter whether I connect locally, over ssh, or using a vnc client), but all I get is the dreaded black screen with an xterm top left. If I then execute 'startkde' from within the xterm I get my normal desktop up. What I am however getting, is a new desktop session. And this happens each time I start a vnc session. I.e. I end up with a LOT of user sessions for my username. (As shown up by a 'users' cmd.) Consequently, each new time I start a vnc session, I get <x> (representing the previous nr of vnc logins) number of xterm windows + 1 appearing. I never get the logged on session.
However I've also noticed my .xsession-errors file filling up. I've googled around enough to get the impression that the reason I'm not getting the logged-on session up in vnc is due to a missing window manager. but haven't hit on the right google combo to fix the issue. I can believe there being a missing window manager due the following related story;About a year ago, I went to switch from KDE to Gnome. Decided I didn't want to and then set out to switch back to KDE. Each time I installed/uninstalled via the GUI "Add/Remove Software". Eventually I got back to KDE and it appeared to work since, so I left well enough alone.t is only now attempting to set up VNC, I have come across all these issues. I firmly believe VNC will work as expected if I can resove the apparent missing window manage issue.xstartup
#!/bin/sh
# Ensures an xterm is always available
( while true ; do xterm ; done ) &
[code]....
I dislike dependency ridden applications or applications that do something useful designed for a specific window manager. So I am starting a thread specifically for requests for applications in Gnome and KDE that aren't immediately available in XFCE, Fluxbox,Blackbox, IceWM, LXDE etc. For instance, I am personally creating a graphical sudo application for the lesser window managers. What other applications would you like to see? this is NOT a request for applications for Linux is general, ONLY ones already available in Linux.
View 1 Replies View RelatedI've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm.
Its hard to explain, so please see the screenshots: [URL]
Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
My task bar is quite broad. so when ever i open more than 6 windows at a time then the task bar adjusts the tabs in two row. how can explicitly specify the width for those tabs. so that they all fit in one line.
View 1 Replies View RelatedFirefox is sometimes slow opening new tabs/switching between tabs. If I click on the kickoff application launcher button, it takes a few seconds to open, and typing something in the search makes it hang up for about 20 seconds before it does the search. Clicking on an app takes 16 seconds before the menu window closes and the program begins to start. Then it takes another 30sec-1min before the app is usable. smplayer plays video with tearing.
Like right now I tried taking a screenshot, and it tells me
Error launching /usr/share/applications/kde4/ksnapshot.desktop. Either KLauncher is not running anymore, or it failed to start the application.
while the app worked fine.
I also tried running glxgears right now, and it runs but the gears don't move, and terminal states
15 frames in 19.0 seconds = 0.789 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 48 requests (48 known processed) with 15 events remaining.
If I'm on dolphin, and I click a video to start smplayer, it takes about 1 minute for it to start.
Memory is using 1.4GB out of 3.6GB, with 0.08GB/2GB swap
Top shows an average usage of less than 10% average. Xorg is always 25%, kwin is always 10% and then rest of the apps are less than that.
CPU: AMD Athlon(tm) II X4 620 Processor
Integrated VIdeo: HD4200 with fglrx driver
When I ssh into the computer with x tunneling, the programs start up faster than being on the desktop
I'm using multiple screen windows and am wondering if it's possible to add a tabbed interface to it, with tab names and keyboard shortcuts for moving between the tabs.
View 1 Replies View RelatedRunning Netbook Remix on a laptop and lost the app list. So now when the application is full screen there's no close button on the tab as found on the default install of Netbook Remix.I have gone into the ~/.gnome/apps/panel and backed up the configuration files to see if forcing the default would work or not
View 1 Replies View RelatedI just upgraded to 10.04 (from 9.10) and I must say that I absolutely hate the new window layout with the buttons on the left. I found a post that helped me switch them back to the right however, when I open any system applications (like control panel) the window has no top panel at all. Really annoying.
View 1 Replies View RelatedI changed the Panel and Window Manager.I'm using Unity 2d and I forgot what the default values are.I did it using Ubuntu Tweak but you can also do it with gconf-editor or throught the terminal, of course.Using Ubuntu Tweak under Startup > Session Control what are the default values for Panel and Window Manger?
View 2 Replies View RelatedI'm running Ubuntu 10.04, with the default appearance of a top and a bottom panel. You know how window titles appear in the bottom panel, and you can re-maximize minimized windows by clicking on that window title?ell, those window titles are no longer appearing. So when I minimize a window, I don't know how to bring it back.The bottom panel is still there, with the "show desktop" and the trash can icon on it.But no window titles.nd I don't have any idea what I did to make this happen.
View 2 Replies View RelatedSo I was thinking of having my bottom panel just for harbouring active windows. I thought also to uncheck expand so it will grow larger when more windows are active. All of which is not a problem. But there's one thing stopping me from doing this.
Currently the active window stops when it reaches either panel.
[forgot to edit the green bar out. Ops. Ignore it.] So in either bottom corner nothing is displayed. How can I get the active window to go all the way to the bottom of the screen. Whilst the panel still appears above the active window? [Probably won't have transparent panel when doing this.]
I just moved from the netbook remix of Ubuntu to the normal version... I really didn't like the desktop layout of UNR. One feature I did like, though, was that every time a window was maximized, the title bar was integrated into part of the top panel... which saved a lot of space on this tiny little screen. Is there a nice way to get that feature on the normal version of Ubuntu?
View 4 Replies View RelatedI have Ubuntu 10.04 and I use a left panel to show window selector.
I have the problem that Window Selector continuously change the window list from one column to two columns of windows icons.
It is so impossible to click on a window icon to select it.
I've tried to set the size to larger and different sizes. I've tried to show or hide the panel. I've tried to group or ungroup windows.
Is there a way to tell windows selector to stay in one column windows list?
I am a bit green in Ubuntu Linux. I installed Java JRE and when I check using Java website I get the confirmation that it is indeed installed. I am unable to run the Java control panel window.
View 9 Replies View Relatedrecently my window list in the bottom panel (where it shows all the minimized windows, etc.) got removed. When I added it back,'s not aligned all the way to the left as expected, it's more towards the middle
View 3 Replies View Related