I'm in Gnome but if I logout I can get to a menu where I can choose KDE as well as other window managers. The problem is I have a program that's running inside Gnome and I don't want to stop it. Is there some way I can get into KDE without having to stop this program?
View 3 RepliesDoes anybody here has made experiences with tiling-WMs ?
- Are there any in our repos, and there?
- Do they run under the normal DE,or only solo?
- Can I use all programs with them?
Actually,I am using openSuse 11.3 with KDE 4.4.
I just installed Enlightenment from slackbuilds, but I'm not sure how to change over to it. Not trying to permanently switch to E, just wanting to play with it some, and use it when I need to free up resources from KDE4. How can I switch between the two?
View 3 Replies View RelatedI'm trying to figure out how to add enlightenment to my window manager list in kdm.
View 2 Replies View RelatedI'm having trouble starting non-kde window managers. From the start-up command line, I get an error message about the XServer when typing "fluxbox" in as a command. However, when I put fluxbox in as a command in konsole, it gives an error message (which makes sense because I was using kde). I also can't start xfce as it is not a recognized command.
View 8 Replies View RelatedI would like to try KDE and XFCE alongside the Gnome desktop but I cannot seem to find an easy way to simply install them. Add/Remove Software is completely useless with this.
View 14 Replies View RelatedI've installed Openbox from the repo and when I log out of gnome and go to log into openbox, GDM restarts. It does this with IceWM too, and even TWM. Am I missing something? A config file that needs modified?
View 9 Replies View RelatedI'm deciding to go with a window manager instead of a desktop environment. I want to go simple and lightweight, and I know a lot of you run window managers such as openbox, fluxbox, and some tiling ones like xmonad, awesome and dwm. I want to give xmonad a try. For those of you who run tiling window managers, how do you know what is running in the background? There is no system tray in a screenshot such as this: [URL]. I'll be playing around with xmobar because that seems to be a popular panel with xmonad, and that's what's in that screenshot.
Also, how do you run your programs? You don't run it always from the command line, do you? When I want to run Chromium, I have to start up a terminal and load it that way, having the terminal and the browser open when using the browser. I know other window managers like openbox provide a right click menu, but xmonad doesn't (or does it?). I know a lot of people who use tiling window managers also use a lot of console apps, and I like that feel, but I don't think I'd want text for everything, such as the web.
slash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
As the title says I am looking for window managers that support having a workspace per screen. Now I'm not talking xrandr, twinview, xinerma or anything. I don't think this feature is possible with metacity. Most tiling window managers are like this and I love it, it makes things so much more efficient.
View 1 Replies View RelatedI tried Docky and then uninstalled it. Then got a notification on a missing library item asking if I wanted to delete association. Now I have no open program tabs on my panel. So how do I get them back? And are there other program window management programs that might be of interest? If it matters, I'm using Ubuntu Studio.
View 2 Replies View RelatedI tried to follow some internet instructions on how to disable the wheel click (that paste the clipboard contents) but I still can't make it work. I tried to add a button mapping to X11 conf file:
Option "ButtonMapping" "1 1 3 4 5"
I also tried by creating a hal policy:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2"> <device>
<match key="info.capabilities" contains="input.mouse">
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.x11_options.ButtonMapping" type="string">1 2 3 4 5 0 0 0 0 0 0 0</merge>
</match> </match> </device> </deviceinfo>
But nothing seems to disable the wheel click.
I am using Xfce 4.6.1 with Slackware 13.0. My Mouse is a Microsoft. IntelliMouse USB PS/2 compatible.
I've tried KDE, XFCE & fluxbox (this latter of which I think I prefer). They all work but they all have similar streaks & distortions on the GUI. Is this certainly a driver issue?
Also, after using them for a while they freeze.
In an earlier thread dc_eros suggested installing the latest openchrome, which fixed a similar problem he had with his first slack13.
I often swapped window managers between fluxbox kde and gnome back when I ran ubuntu to suit my needs. When I installed slackware, I picked KDE because of the convenient app suite. I don't wish to uninstall kde but I'd like to be able to pick which environment I use when I swap to a GUI. Something like a flag, startx --fluxbox.
View 2 Replies View RelatedI have followed to the letter the wiki HowTo on setting up VNC and it works (sort of). I get a VNC session (doesn't matter whether I connect locally, over ssh, or using a vnc client), but all I get is the dreaded black screen with an xterm top left. If I then execute 'startkde' from within the xterm I get my normal desktop up. What I am however getting, is a new desktop session. And this happens each time I start a vnc session. I.e. I end up with a LOT of user sessions for my username. (As shown up by a 'users' cmd.) Consequently, each new time I start a vnc session, I get <x> (representing the previous nr of vnc logins) number of xterm windows + 1 appearing. I never get the logged on session.
However I've also noticed my .xsession-errors file filling up. I've googled around enough to get the impression that the reason I'm not getting the logged-on session up in vnc is due to a missing window manager. but haven't hit on the right google combo to fix the issue. I can believe there being a missing window manager due the following related story;About a year ago, I went to switch from KDE to Gnome. Decided I didn't want to and then set out to switch back to KDE. Each time I installed/uninstalled via the GUI "Add/Remove Software". Eventually I got back to KDE and it appeared to work since, so I left well enough alone.t is only now attempting to set up VNC, I have come across all these issues. I firmly believe VNC will work as expected if I can resove the apparent missing window manage issue.xstartup
#!/bin/sh
# Ensures an xterm is always available
( while true ; do xterm ; done ) &
[code]....
I dislike dependency ridden applications or applications that do something useful designed for a specific window manager. So I am starting a thread specifically for requests for applications in Gnome and KDE that aren't immediately available in XFCE, Fluxbox,Blackbox, IceWM, LXDE etc. For instance, I am personally creating a graphical sudo application for the lesser window managers. What other applications would you like to see? this is NOT a request for applications for Linux is general, ONLY ones already available in Linux.
View 1 Replies View RelatedI've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm.
Its hard to explain, so please see the screenshots: [URL]
Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
I was created one folder in linux with current time was 1978(For example). I was moved this folder to usb(FAT32 file format).While seeing this folder in window its not showing the folder time created time stamp, because the USB file system only support the year after 1980 . But again i am putting the same folder in linux ,its showing the correct time stamp.How is it possible? Because FAT32 only supports timestamp after 1980, but still its showing 1978 in linux system
View 7 Replies View RelatedI wrote a simple shell script called main.sh and inside it calling another shell script called rename.sh.Both are placed in a same directory.[/home/srimal/test]
$cat main.sh
Code:
#!/bin/sh
[code]...
I am having a souce file (say SOURCEFILE) as below with 5 columns and many rows.
pol name status loan address
123 aaa 21 100 RJY
234 bbb 31 200 RMY
345 ccc 21 300 SJY
456 ddd 41 400 pqr
i want to compare the file (say COMPAREFILE ) which is below :
123
345
I need the following output file (sayOUTPUTFILE) as below :
( ie for file COMPAREFILE i need column 2, column 4 ie name and loan from source file )
ie output file required is to be like below :
123 aaa 100
345 ccc 400
Till now iam using the following method.
1. cutting column 2nd column
2. again cutting 4th column
3. in third, step merging the 2nd and 4 th column.
method of writting single line command or any awk programme to do this in one step.
I need output file (say OUTPUTFILE) as below
What's the command to open multiple files in Emacs vertically/horizontally splitting window.
View 4 Replies View RelatedI am having a problem unzipping multiple files at 1 time.
Proper unzip command that will:
1) extract the file from the zip.
2) remove the zip file.
All my zip files start with SB and end with .emi.zip
SB*.emi.zip
I would like to put both Tomboy and Gwibber inside the widget layer, but so far I've only managed to add one or the other, I can add one by putting:
Code:
name=gwibber
into the "window match" box but how can I add another?
I want to use a function that able to get the current clock time when I call it from inside my wireless driver?
View 1 Replies View RelatedI'm looking for a program that will digitally display the time in three different cities - all showing at once. I don't care if it is a panel applet or stand-alone. I'm using Suse 11.3 and Gnome.
View 5 Replies View RelatedI'm using wine to run steam and play Star Wars Battlefront 2. The reason I'm doing this is because it actually is bugged and doesn't work with XP like its supposed to, but surprise, it works in linux! It works flawless and beautifully with one exception. When loading missions the game takes 5-10 min to load. I have a great PC when compared to the days this game was written in. AMD dual-core processor with an Nvidia 9800 series video card etc. but it just takes a long time to load the maps and mission parameters I guess. Any one know where the information might be getting hung up and how I might be able to streamline it a little?
I know I've seen a few posts about wine and people usually remind the posters that this is an ubuntu forum, not a wine forum, but I was hoping someone with more computer knowledge than me might be able to give me a simple reason for this issue. Feel free to point me some where else to post about this.
So, I usually write/find a test case generator for any code that I write. This type of code generally leads to some file output. To be thorough, I try and generate many different files to test my code on.
Say the command is like this:
Is there a way to automate this for many different values of the parameters and generate many different files?
I tried:
I wasn't able to use the $i in the filename, and without it the command gave me no errors, but did nothing else either. I know the Unix command line is very powerful, and I have a feeling that this should be possible, but I just don't know how to do it.
If I install a new desktop manager without uninstalling the old one, how do I specify which one to use? I wanted to look at LXDE, so to see what would happen, I installed it without uninstalling KDE. KDE apparently just sat underneath, and was unaffected. I didn't keep LXDE, but I might, if I could switch back to KDE to do work until I understood LXDE. (Keeping up-to-date in MEPIS will force me to learn KDE 4 despite that KDE 3 was fine, so I might as well examine other desktop managers.)
View 4 Replies View RelatedI have a noob qn, if I installed a program with yum, will I be able to see the details of the installed program with rpm -qa? My linux has no internet access so I can't test it out.
View 11 Replies View RelatedI have packer installed for AUR packages, but I want to be able to use the pacman command for both. I think I will need a function for this -- what I mean is that whenever I use pacman, it will try using packer and if that fails (invalid option) it will use pacman-color. It could also decide which program to use based on the arguments. I can't just use packer (alias pacman='sudo packer') because packer doesn't have some options like -R to remove packages. I want to always use it to install and upgrade packages however, because It can install from the default repositories as well as AUR.
Does someone know how to accomplish this, or could point me in the right direction? I'm new to bash scripting. error (e.g. pacman -V prints packer: Option '-V' is not valid.).