OpenSUSE Install :: GNOME Didn't Start After Update To 11.2
Jul 14, 2010yesterday I try to update my system to 11.2 After that my GNOME didnt start in automatic mode ( I`m not able to start GNOME by hanD) What I have to do?
View 9 Replies
ADVERTISEMENT
OpenSUSE Install :: Suse 11.2 Didn't Start?
Mar 8, 2010I install 11.2 on AMD dual core 4200+ and 2G ramafter I enabled some effects on configure Desktop effects and when I pressed apply key the computer hang and when I restart it, it hang before login screen
View 7 Replies View RelatedOpenSUSE Install :: Gnome X Doesnt Start ?
Jan 9, 2010Gnome desktop and everything is fine and it just goes to a prompt.
View 5 Replies View RelatedOpenSUSE Network :: Networking With A Fresh Installation - Nm-applet Didn't Start
May 3, 2011I installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
OpenSUSE Install :: Update Start But Would Stop Right In The Middle And Refuse To Install Pulseaudio(...) Package
Jun 18, 2010I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
OpenSUSE Install :: Update Gnome 2.6 To 3?
May 23, 2011i installed Opensuse oneweek ago.i use gnome and kde.i want to update my gnome to 3.how to do this?i think my current version of gnome is 2.6
View 1 Replies View RelatedOpenSUSE Install :: KDE / Xorg Don't Start After Update
Aug 15, 2011this evening I updated my 11.4 via KpackageKit then logged out when I did Xorg died and I was dumped on the text console.
Looking in the logs I see
-- /var/log/messages
Aug 15 17:59:49 linux-vg3v acpid: 1 client rule loaded
Aug 15 17:59:49 linux-vg3v kernel: [22090.925299] NVRM: API mismatch: the client has the version 275.21, but
[Code]....
Unfortunately I didn't check the update list too closely. The above seems to indicate that an Xorg component was updated but the kernel module wasn't.
OpenSUSE Install :: Gnome Not Starting After Update (gdm)?
Feb 7, 2010I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies View RelatedOpenSUSE Install :: Unable To Use Gnome When Update To 11.2
Jul 14, 2010unable to use Gnome when update to 11.2
View 2 Replies View RelatedOpenSUSE Install :: 11.1 Post-software Update X Server Won't Start
Nov 7, 2010I have been running OpenSuSE 11.1 with the proprietary VNIDIA driver for a year or so and recently upgraded my internet connection from slow old dialup. I installed some software upgrades this made possible but the process failed on some point (I didn't make a note of the details) and the next time I tried to log on it booted up to the CLI. I tried startx and got the message;
using config file "etc/x11/xorg.conf"
no devices detected
Fatal server error
no screens found
giving up
xinit: Connection refused (errno 111): unable to connect to X server
[Code]....
OpenSUSE Install :: When Type In Password At Login Screen And Hit Enter / Gnome Do Not Start
Feb 5, 2010It happens like 50% of my Suse 11.2 startups, when I type in my password at login screen and hit enter, Gnome do not start, i can only see the green blank screen,or sometimes it start to show only my custom wallpaper and nothing more, when i try ctrl+alt+backspacex2 and login again everything seems to work fine, but what could be wrong ? is it a hardware issue ? Moreover, sometimes when I want to shutdown my laptop and click the shutdown button, suse do logout, but instead of turning off the laptop , it brings me to login screen, clicking the shutdown button at login screen makes my hdd lamp blink and thats all.
View 6 Replies View RelatedOpenSUSE Install :: Bundle-lang-gnome 2233 Update Fails?
Jun 26, 2010The automatic updater cannot install bundle-lang-gnome 2233: "A protected system package cannot be removed" ("Ein geschtztes System-Paket kann nicht entfernt werden.")Detail info: "Subprocess failed. Error: RPM failed: error: package bundle-lang-gnome-extras-de-11.2-19.21.1.noarch is not installed"
View 1 Replies View RelatedUbuntu :: Gnome Does Not Start Correctly After Update?
Dec 4, 2010I recently got the last round of updates, including linux kernel 2.6.32.26. after several programs froze up (i hadn't restarted since the update) i restarted only to find that Gnome starts up into a different look than I had it setup to (normally with a custom theme and without a login prompt). it now starts with a more basic theme and a login prompt which won't accept my password. something similar had happened before and i fixed it by booting into recovery mode and running dpkg, and having to reboot more than once but it returned to normal. I tried running it again and it hasn't worked, so I must ask for advice. I am working from Fedora 10 on the same computer.
View 9 Replies View RelatedFedora :: Fedora/GNOME Didn't Install With Add/Remove Programs Feature?
Feb 20, 2010Recently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere
View 3 Replies View RelatedUbuntu :: After Update Of 10.04 - Can't Start Gnome Desktop After Login
Jun 10, 2010I use ubuntu 10.04 in VirtualBox (upgrated from 09.10), host os is Win7.
3-4 days ago update of ubuntu required restart of Ubuntu (linux kernel was updated).
After 3 days (i.e. yesterday) I restarted the system. I found that flashlib in Chrome became to work unstable, some artefact appeared, and only scrolling down-up in browser allowed to update view of screen. I run update manager. It showed ~88Mb of updates for last 3 days.
After download of updates, apply changes was failed! I faced this first time (!). I remember message like "can not synchronize file /usr/share/..." or something like that.
I restarted ubuntu again. Now I could not login. System hangs after login. No Gnome menu appears etc.
I tried to fix issue using dpkg. I found that some lib (ure) related to OpenOffice was not assigned (version XXX required, but bersion XXXY found). dpkg offered to solve this by some combination. I did so. Then I run dpkg update, and no errors appeared.
Also I updated VirtualBox to version 3.2.4, updated VirualBox Additions via console terminal in ubuntu.
But still I can't fix problem with gdm/gnome.
dpkg-reconfigure gnome-*** did not help for me.
I tried to check logs, but I have not found something "interesting".
At the moment terminal is the only way to login.
OpenSUSE Hardware :: Didn't Do Right Is To Install The Gspca/Spca5xx Driver Found
Dec 22, 2009I have a Logitech Quickcam Pro 4000 webcam which is supposed to work OK with Linux. I use Open SUSE 11.0 and under gqcam I have multiple images. And in black & white. See here: (if the image doesn't show it can be found there: WebcamOpenSuSe on Flickr - Photo Sharing! So, I wonder: is this a problem of gqcam or a driver problem? The only thing that maybe I didn't do right is to install the Gspca/Spca5xx driver found here: HCL/Web Cameras - openSUSE because my camera isn't on the list of UVC compliant webcams.My camera is seen as: Bus 005 Device 002: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
View 1 Replies View RelatedOpenSUSE Install :: When Booting - System Announced Corrupted IPtables And Didn't Load KDE
Dec 8, 2009I recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
OpenSUSE Install :: Install Error - Config Defaults For GNOME For GNOME Power Manager Have Not Been Installed Correctly
Mar 4, 2010Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
General :: Debian 6 Live Didn't Start
Mar 17, 2011In order to try debian 6, I started by using debian 6 live, I burnt the following file ((debian-live-6.0.0-i386-kde-desktop.img ) as iso via cdbernerxp (from windosw xp), I tried to use with my old pc pentium 4, 512 mb ram,120 gb of hard dsk space, but it didn't start, it just stuck at menu (live, failsafe etc...).
View 1 Replies View RelatedServer :: Clamd Service Didn't Start?
Apr 15, 2010I try to start clamd service since I found "PROCS CRITICAL: 0 processes with command name 'clamd'" from nagios. so I check at its log file at "tail /home/clamav/logs/clamd.log" it said that log file exceeding maximum limit so I try to rotate log by
pico /root/123/etc/logrotate.d/clamd
/home/clamav/logs/clamd.log {
rotate 12
[code]...
Fedora :: 14 Didn't Start - Cannot Continue In Login Step
Jul 14, 2011In my pc i have installed Fedora 14 x86_64 and my Fedora didn't start. My problem is that i can not continue in login step and when i press F1 or Esc I get this message:
[Code].....
Ubuntu :: Megaupload Download Didn't Starts Or Start Later?
Dec 10, 2010I've installed tucan on my HP Pavilion dv2800t with ubuntu 10.10.Megaupload download didn't starts or start later. If I try cut and paste link on Firefox I recives a message from Megaupload sites for more request by my ip adress and wait for download more minutes.The other downloads from rapidshare, hotfile ecc with tucan works fine.
View 1 Replies View RelatedUbuntu :: Unable To Log In - Gnome Didn't Configure Properly
May 18, 2010I just installed Ubuntu this afternoon, and it has been working perfectly until i tried to install the flash plugin. My laptop froze and i had to unplug it to restart. Since then, whenever i try to log on, an error message appears saying that Gnome Communications (? i think thats what it said) center didn't configure properly and to contact the computer administrator.
View 2 Replies View RelatedDebian Multimedia :: Changing Graphic Card - Xdm Didn't Start
Mar 5, 2010I have one Asus motherboard with inbuilt HD 3300 Radeon family graphics system, I have used it with radeon and radeonhd drivers and I have xorg.conf. I tried to change card to Radeon HD 4350 but it didn't give more than terminal view, Xdm didn't start. I believed the driver would support both cards?
View 1 Replies View RelatedCentOS 5 :: Can't Get Cluster To Work (aisexec Daemon Didn't Start)
Oct 14, 2009I have problems setting up a (2 server) cluster. I get the following messages in syslog:
Oct 14 13:02:21 korzel ccsd[7823]: Starting ccsd 2.0.115:
Oct 14 13:02:21 korzel ccsd[7823]: Built: Sep 3 2009 23:26:21
Oct 14 13:02:21 korzel ccsd[7823]: Copyright (C) Red Hat, Inc. 2004 All rights reserved.
Oct 14 13:02:21 korzel ccsd[7823]: cluster.conf (cluster name = cl_vpanel, version = 1) found.
[code]....
Tried with the "basic" hosts file as well, eg with only the localhost lines in it. Both server run centos 5.3, up-to-date.There is no real error anywhere which might explain WHY aisexec daemon won't start. When i start openais manually (/etc/init.d/openais start) it starts without any errors.
CentOS 5 Server :: Soft-Raid Didn't Start After Boot?
Apr 22, 2010I've a database-server (IBM x3650 M2) with about 3 TB Data on SAN (Hitachi) with lvm top of softraid (RAID1) based on multipath (2 SAN-boxes in different buildings). After booting the server, multipath starts, but no md starts the mirror. The same configuration with SLES 10 works.
cat /proc/mdstat
Personalities : [raid1]
md13 : active raid1 dm-17[1] dm-14[0]
[code]....
OpenSUSE :: Gnome Terminal At Kde Start?
Apr 26, 2011I installed gnome 3.0 through the one installer, and now every time I start kde I get a gnome terminal that says
Code:
** (orca:4321): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags'
** (orca:4321): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags'
** (orca:4321): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags'
It keeps shrinking everytime I try to expand it a bit, I had to edit > select all and copy to be able to read it. And it sounds like it's trying to play a sound that sounds like welcome, but it gets cut off, it also makes a sound when closing it. I'm assuming this was supposed to be a first time run thing for gnome but it keeps showing up in kde.
OpenSUSE :: How To Start Gnome-paint Installation
May 2, 2010I'm sorry for my stupid questions, but I'm quite new in linux world.
does anybody that had already installed gnome-paint could help me??
i don't know how to start the installation.
OpenSUSE :: Gnome Commander Does Not Start As Root
Apr 8, 2011gnome commander does not start as root. It started before. Not so long ago i restarted my pc, and i think gnome-commander (as root) did not close. And now it wont start. I started it as: su -> password -> gnome-commander Where can i check or what command should i run to help u guys diagnose the problem.
P.S. i tried to run nautilus as root but that did not work either, and gave me these error:
4 errors of this type: (nautilus:8372): Eel-WARNING **: GConf error: ...
3 errors of this type: (nautilus:8372): Unique-DBus-WARNING **: Unable to connect to ...
OpenSUSE :: Start A Gnome-terminal From Firefox Url?
Aug 14, 2011Does anyone knows how to start a gnome-terminal from firefox url? With a protocol or something? Is this possible? Or any other command line.
View 4 Replies View Related