I install 11.2 on AMD dual core 4200+ and 2G ramafter I enabled some effects on configure Desktop effects and when I pressed apply key the computer hang and when I restart it, it hang before login screen
View 7 Replies
yesterday I try to update my system to 11.2 After that my GNOME didnt start in automatic mode ( I`m not able to start GNOME by hanD) What I have to do?
View 9 Replies View Relatedi just installed OpenSuse 11.2 whiteout problems, once finished i reboot my eeepc, but the startup stops at :
Code:
Starting udevd:
Loading drivers, configuring devices
I recently installed open SUSE 11.3 on my computer which I built myself and the problem I have is after rebooting the computer, I get a black screen. It will not boot the operating system. Here is my component specification:
Video Card: BFG GeForce 8800GTX 768MB 384-bit GDDR3 PCI Express
Motherboard: DFI LP DK 790FX-M2RS AM2+/AM2
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz
Memory: CORSAIR XMS2 4GB (4 x 1GB) DDR2 800 (PC2 6400)
HD: Western Digital Caviar SE16 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s
Another question is, where can I purchase SUSE 11.3 and if I do purchase, will I get help on the phone installing it ? Pleas keep in mind that I have little experience with SUSE Linux.
I downloaded and installed OpenSUSE 11.2 but only screen I see is console, SUSE won't even open.I assume that is an error of graphics card (ATI Mobility Radeon HD3650) or Processor (Intel Centrino 2)The error says that there is niether internet connection nor a driver for graphics card.I was able to work the command "startx" while I was using Ubuntu 9.10 (Ubuntu was not able to install proper graphics card driver too)
View 9 Replies View RelatedI wanted to try openSuse alongside with Windows Vista and Ubuntu. During the installation Suse wanted to delete my Windows partition. Of course I denied and stopped this installation, but now when starting my computer, the boot menu gives Vista, Ubuntu and Suse as a choice, but if I choose Vista, the Suse installation process is starting instead of Windows, there is no way to get Windows started (fortunately Ubuntu is working so that I can write this message).How can I get Windows starting?
View 9 Replies View RelatedI installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
KMix doesn't start up in OpenSUSE 11.4 (x86) + KDE 4.6.0. So I can't configure my audio channels and so on.
Error:
inux-d84p:/home/Willem # kmix
unnamed app(7652): KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply.
[code]...
I have a Logitech Quickcam Pro 4000 webcam which is supposed to work OK with Linux. I use Open SUSE 11.0 and under gqcam I have multiple images. And in black & white. See here: (if the image doesn't show it can be found there: WebcamOpenSuSe on Flickr - Photo Sharing! So, I wonder: is this a problem of gqcam or a driver problem? The only thing that maybe I didn't do right is to install the Gspca/Spca5xx driver found here: HCL/Web Cameras - openSUSE because my camera isn't on the list of UVC compliant webcams.My camera is seen as: Bus 005 Device 002: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
View 1 Replies View RelatedI recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
I am new to Linux and wow, it did not take me long to run into a huge snag. I am running Suse Linux Enterprise 10 on a laptop and by some strange reason the computer froze from overheating and I was forced to shutdown improperly. Once I restarted it booted right to the command prompt when it usually instead boots to the default user. I managed to get gnome running using the "startx gnome" command. But when gnome loads, none of my normal extentions load like my wireless driver, the sound driver, etc. how to restore gnome to automatically load the default user on start up or fix any other damage I might have done? lol
View 3 Replies View RelatedIn order to try debian 6, I started by using debian 6 live, I burnt the following file ((debian-live-6.0.0-i386-kde-desktop.img ) as iso via cdbernerxp (from windosw xp), I tried to use with my old pc pentium 4, 512 mb ram,120 gb of hard dsk space, but it didn't start, it just stuck at menu (live, failsafe etc...).
View 1 Replies View RelatedI try to start clamd service since I found "PROCS CRITICAL: 0 processes with command name 'clamd'" from nagios. so I check at its log file at "tail /home/clamav/logs/clamd.log" it said that log file exceeding maximum limit so I try to rotate log by
pico /root/123/etc/logrotate.d/clamd
/home/clamav/logs/clamd.log {
rotate 12
[code]...
In my pc i have installed Fedora 14 x86_64 and my Fedora didn't start. My problem is that i can not continue in login step and when i press F1 or Esc I get this message:
[Code].....
I've installed tucan on my HP Pavilion dv2800t with ubuntu 10.10.Megaupload download didn't starts or start later. If I try cut and paste link on Firefox I recives a message from Megaupload sites for more request by my ip adress and wait for download more minutes.The other downloads from rapidshare, hotfile ecc with tucan works fine.
View 1 Replies View RelatedI have one Asus motherboard with inbuilt HD 3300 Radeon family graphics system, I have used it with radeon and radeonhd drivers and I have xorg.conf. I tried to change card to Radeon HD 4350 but it didn't give more than terminal view, Xdm didn't start. I believed the driver would support both cards?
View 1 Replies View RelatedI have problems setting up a (2 server) cluster. I get the following messages in syslog:
Oct 14 13:02:21 korzel ccsd[7823]: Starting ccsd 2.0.115:
Oct 14 13:02:21 korzel ccsd[7823]: Built: Sep 3 2009 23:26:21
Oct 14 13:02:21 korzel ccsd[7823]: Copyright (C) Red Hat, Inc. 2004 All rights reserved.
Oct 14 13:02:21 korzel ccsd[7823]: cluster.conf (cluster name = cl_vpanel, version = 1) found.
[code]....
Tried with the "basic" hosts file as well, eg with only the localhost lines in it. Both server run centos 5.3, up-to-date.There is no real error anywhere which might explain WHY aisexec daemon won't start. When i start openais manually (/etc/init.d/openais start) it starts without any errors.
I've a database-server (IBM x3650 M2) with about 3 TB Data on SAN (Hitachi) with lvm top of softraid (RAID1) based on multipath (2 SAN-boxes in different buildings). After booting the server, multipath starts, but no md starts the mirror. The same configuration with SLES 10 works.
cat /proc/mdstat
Personalities : [raid1]
md13 : active raid1 dm-17[1] dm-14[0]
[code]....
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View Relatedi have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies View RelatedI built a new pc and want to have Suse again. Unfortunately Suse installation does not recognize my CD/DVD device. So I boot from DVD select installation and a few moments later there's a popup 'make sure cd number 1 is in your drive'. I also did try to load other kernel modules but nothing helps. The only drive which is always recognized is floppy drive.
Here are some details about my system: Asrock P55M Pro board, Intel P55 chipset, 2 SATA HDD's, IDE NEC 2510 DVD writer, BIOS is set to AHCI due to Windows.
I tried following:
Use Suse DVD 11.0, 11.2, x86 or x64
Set BIOS to AHCI, IDE (compatible), IDE (enhanced)
DVD writer NEC was used in my former pc and did install 11.0 without probs.
Installing from HDD is new to 11.2 thus I copied the DVD to a directory. During Installation I can select the correct partition but suse is not able to find repositories.(?)
I have installed windows 7 in my laptop. i have only c drive with a memory space of 284mb. now i like to install suse 11 in c drive itself without distrubing windows 7. after installing i should be able to go for either windows 7 or suse 11 easily. i must have the both. I had partitioned windows 7 in fat. i had not use ntfs.
View 1 Replies View RelatedHave burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies View RelatedI am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
I have suse 11.0 installed and now that 11.1 is out i would like to update. I have searched for this already and have found three ways of doing it:
zypper dup
zypper up
in YAST view all packages and right click and click update all if update available.
I have tried all these methods but i still seem to be running Suse 11.0 as it says in sysinfo:/ . How do i successfully update from 11.0 to 11.1?
