OpenSUSE Install :: 11.2 - Root Ext4 FS Corrupted On SDA6
Jun 2, 2010
I was unable to boot into my system after I'd just shut it down, so I tried repairing it using my installation media... only to find that though my root Ext4 fs on sda6 was corrupted & *supposedly* repairable, the cd could not do so for some reason! All I can get is a command line, saying something about the root fs being mounted as read only, and I have no idea how to resolve this. I cannot afford to loose ANY of the data I have on here.
View 2 Replies
ADVERTISEMENT
Dec 20, 2009
i need to change the owner and group for the device /dev/sda6 to the DB user yard. I can type as root: chown yard:yard /dev/sda6 ls -l i see the changes. But if i start the DB init, the old user and group names are set. (root:disk). With Suse 9.2 i don't have this problem. With Suse 10.3 i have to change the user:group settings after reboot. But with 11.2 i find no way to change.
View 1 Replies
View Related
Jul 19, 2011
I have a second HD partitioned and formated to EXT4, the whole capacity. It was mounted to a directory in my home folder I'm getting an error that it cannot be mounted.
Running "dmesg | tail" i get this: (rigt now the HD is connected to the computer using a USB adaptor)
Code:
laptop:~> dmesg | tail
[ 375.821495] sd 9:0:0:0: [sdb] Write Protect is off
[ 375.821505] sd 9:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 375.821512] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[code].....
View 9 Replies
View Related
Jun 28, 2010
I was resizing my ext4 partition and I cancelled it while it was at the reading stage think it was only reading it and nothing else, but now it is corrupt.
When I run 'fsck -n /dev/sda5' I get the error:
Code:
View 4 Replies
View Related
Feb 8, 2010
The Ext 4 file system of the partition (dev/sdb1) is corrupted. When I seek to repair this using the boot repair tool it is unable to resolve this. I admit that I don't fully understand the problem - except that I'm unable to open and use programs.
View 8 Replies
View Related
Jun 27, 2010
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
View 1 Replies
View Related
Jul 29, 2010
I know I said I wouldn't do anything that could possibly do anything bad to the drive until I receive my external hard drive. I just didn't expect that upgrading from 11.2 to 11.3 via zypper dup has the potential to do that.
First, the problem: The most important partition of my computer containing all the irreplaceable stuff (images) which I had apparently only partially backed up was corrupted after I upgraded from 11.2 to 11.3.
On my computer, there are 2 drives. sda was the one that had Windows. sdb had an NTFS partition and a few smaller partitions which I used for openSUSE. After doing quite a bit of searching on upgrades corrupting partitions, I didn't find anything about it doing what I feared which was corrupting the NTFS so I went ahead and upgraded.
The upgrade went along smoothly. No problems that I could tell. The only weird thing was that the window borders disappeared near the end but I assumed that was supposed to happen. And then I restarted. First thing I noticed was that the background was blue instead of the image I had set (which happened to be on the NTFS partition). I didn't think much of it at the time figuring it was just a quirk in the upgrade process. I went ahead and decided to reset the background to what it was. And then I realized that the NTFS partition was missing -- it wasn't mounted or visible at all. That was when I started to panic a bit.
I opened up Yast partitioner and everything looked fine except that NTFS partition in question had a little * by it. I went ahead and reset its mount point only to receive an error saying that the filesystem in question doesn't exist. And sda became sdb and sdb became sda if that changes anything.
I went into Windows expecting for it to do a CHKDISK on bootup for the drive (D: ) but none of that happened. Hoping that everything was fine, I went in and tried to access it only be given an error along the lines of "The drive in D: is not formatted. Do you want to format it?" Of course, I said no but that was when I realized that this was no partition table problem like last time.
I tried restarting but Windows froze and refused to do so for several minutes so forced the computer to shutdown and loaded my copy of GParted LiveCD. It showed a 30GB unrecognized partition, another 30MB one and some unallocated space. TestDisk fixed that. (so it turns out, there was a partition table issue) What was left was what looked OK except the one partition on sda (the original sdb) that I could not afford to lose had an error.
I can't remember the exact error but it said something like "Are you trying to use a disk as a partition? Are you trying to use /dev/sda as /dev/sda1 or vice versa?" That was either in the error message or in the message I got when I tried to check the disk.
Still trying to get Windows to check the disk, I tried booting from the new sda into Windows. What I got was the Dell Utility program. It said no mouse detected and I couldn't do anything so I shut it down.
I tried going back into Windows the normal way and got the Dell Utility. I figured that this was an MBR problem after I went back into openSUSE with the new sdb still reading perfectly. Although I couldn't manage to restore the MBR so I can't log into Windows. But the other issue is far more important.
View 9 Replies
View Related
Apr 24, 2011
I am trying to install Ubuntu 10.10 from a USB flash memory stick. It works fine until around 95%, where I get the following warning/error:
[Code]....
I click OK and the installer seems to finish nicely, except the terminal throws several errors along these lines (see photo):
[Code]....
I tried also with 10.04 LTS, the difference being that the install warning appears two or three times instead of once. Some results from googling (Ubuntu Forums, Ubiquity bug) suggest unchecking the initial update options. I am going to try this but I'm not sure if I'll be able to get the boot loader right (there seemed to be problems with this).
View 7 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
May 8, 2010
I was updating all the installed packages on my system yesterday via YAST. The package manager seemed to hang when downloading a small update for YAST itself (related to ncurses, I think) so I hit the abort button. The package manager quit but now it doesn't work. Trying to start the software management module (Qt version) give me the following error:
UI Syntax Error
Couldn't load plug-in qt-pkg
Check the log file!
So I then tried the console version of YAST. The software management module doesn't work here either. It give me the following error:
UI Syntax Error
Couldn't load plug-in ncurses_pkg
Check the log file!
I Googled a bit and came to the conclusion that for the second error I should try the following command:
zypper install yast2-ncurses-pkg
But this just gives me another error:
zypper: error while loading shared libraries: libzypp.so.619: cannot open shared object file: No such file or directory
So now it appears that both YAST and zypper are corrupt!
View 9 Replies
View Related
May 9, 2010
Using 11.2 64 bit on Amd 3200 64I installed 4 Days ago After running a online update yesterday with Yast which was completely finished, starting the machine today, I wanted to add a program Yast reports "UI Syntacs Error Couldn't load plugin qt_pkg" Using 11.0 on P2800 I run an online update 3 days ago. Today I started, the updater reported updates. When I accepted I got the error message "DBus error :Unable to get transaction id from packagekit." Disabling the updater, starting Yast, I got "error initializing the repositorys.Parse error." and "UI Syntacs Error Couldn't load plugin qt_pkg" On both machines I gave the command rpm --rebuilddb On the 11.2 Yast started without error.
I wanted to instal a program when the download was completed I got again the message "UI Syntacs Error Couldn't load plugin qt_pkg"On the 11.0 Yast installed a small Program without error.When I opened Yast online update, I got the "parse error again. When I say o.k. there, Updates are shown and installed. However using the updater kit it reports still "DBus error : Unable to get transaction id from packagekit". How can I fix the DBUS error of the 11.0 (On an 9.0 I had to deinstall Rug and thereafter run only Yast) I can deal with the Parser error myself, checking all Repositories should do it)
View 6 Replies
View Related
Mar 7, 2010
I've two laptops, my main one is Dell inspiron 1545 and for experimental purposes, I use Acer Aspire 5315. I used to be a Redhat linux user from 2001 to 2003 on and off, but lost touch with linux for the past few years. I grew frustrated with windows after my Vista recovery partition in Acer Aspire got corrupted and when I took the laptop for servicing, the service person installed a pirated copy of XP. The laptop constantly overheated and I always received all kinds of warnings from microsoft about using pirated version. I finally decided to buy a new laptop and hence bought Dell inspiron 1545. Too bad I didn't realize I could have switched to linux.
I was suspicious about Windows 7 in my new dell right from the day one and thought of checking linux options available. I was surprised to know the the most popular linux distro now was no longer Redhat or Suse but a relatively newcomer Ubuntu. I installed Ubuntu 9.10 on a 40GB extended partition and was extremely satisfied with the ease of installation. The hardware detector told me I need to install "Broadcom STA" for my wireless card to work. I installed ATI driver from AMD website and it worked like a charm. Like any linux user, I couldn't resist the temptation to distro hop, so decided to use my old Acer laptop as testbed. The first distro I tried was KDE version of Fedora 12. The splash screen was very impressive and more graphical than Ubuntu's, however the boot time was painfully slow and I ran into a dependency hell while trying to upgrade using Kpackagekit.
I tried Linux mint KDE next and it was impressive, but I was still not completely satisfied. I then tried Opensuse 11.2 KDE and I immediately fell in love with the beautiful look and feel. I was so impressed that I went ahead and replaced the ubuntu in my dell with Opensuse 11.2. However, it was not smoothsailing when it came to hardware detection. After a lot of trials and tribulations, I managed to download Broadcom STA drivers and managed to get my wifi working. I realized that Radeon HD was installed as default and tried to turn on compositing. KDE got stuck and even after cold reboot, didn't recover. I had to re-install the OS and this time I tried to install ATI proprietary driver. But running the driver install script threw up lot of errors and I lost my mouse cursor. I had to re-install the OS again, generate RPM for the ATI driver and install it along with Kernel source, headers, gcc, make, etc... Finally I was able to activate compositing.
I then installed Xen and when I booted to Xen kernel, my mouse cursor again dissapeared, most likely due to non-compatibility of ATI driver. I had to uninstall Xen. I then tried to upgrade the kernel to 2.6.31-15 and again my mouse cursor dissapeared. I had to re-install the entire OS again. I'm so frightened of Kernel updates now. I never had such problems with Ubuntu kernel updates, maybe ATI is more pro-active in releasing new versions of drivers when it comes to Ubuntu.
In-spite of all my hardships, I'm so much in love with Opensuse and KDE. I love it so much that it now runs on both my Dell and Acer. I've removed all the other distros from my Acer. It has been quite a long time since I tried any other distro and I don't even have the faintest desire to distro-hop. Infact, for the past few days I'm so worried about the news of Novell takeover. I really don't want Opensuse to die. It will be a big loss for Linux users.
View 4 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Sep 16, 2010
I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies
View Related
Dec 8, 2009
I recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
View 6 Replies
View Related
Feb 23, 2010
both root and home partition have suddenly become corrupt, and the repair tool from the installation disk just loops (Do you want to repair? Yes! Do you want to repair? Yes! Do you...).
Code:
[ 54.209685] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 54.209758] ata1.00: irq_stat 0x40000008
[code]....
View 9 Replies
View Related
Mar 24, 2010
After installing the recent kernel update and rebooting my machine I have found a horrible fact, my computer won't boot anymore. It seems my root partition was corrupted, and running fsck on it just sends me through a endless loop of "Ignore Errors {y}:" and "Force overwrite {y}:". I have already tried the use the repair system on the installation DVD but that doesn't do anything, the pop up asking if I want to repair the file system keeps coming up when I click repair.
View 1 Replies
View Related
Apr 17, 2010
My openSUSE 11.2 system has periodic running of fsck disabled for ext4 filesystems (Maximum mount count = -1, Check interval = 0). What is the reason for this? Is it because fsck is not necessary on a periodic basis with ext4, and only necessary when errors are detected? Or is it because fsck has problems working on ext4 filesystems?
The ext3 filesystems do have it set (Maximum mount count = 500, Check interval = 5184000 (2 months)). I would like to know why fsck is not set to be activated for ext4.
View 7 Replies
View Related
Nov 11, 2010
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies
View Related
Jan 1, 2011
I have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies
View Related
Mar 18, 2011
I have a very simple question I am creating a new partition for storing files, installers, documents, etc, I am going to make it ext4, now my question is, do I have to specify a mounting point?? I would not like to do that, but if I do not specify a mounting point, will I be able to access that partition? So in what cases you specify mounting point and when you do not specify mounting point?
View 6 Replies
View Related
Sep 2, 2011
Tired of fat32 fragility, I reformatted a 4GB pen-drive as ext4 using Yast's partitioner. I chose format as ext4 and checked fstab options "can be mounted by user", "no access time" and "ordered journaling". I thought that these fstab options would be ineffective since a removable device won't be added to fstab. when I insert the pen-drive it auto-mounts and the folder /media/EMTEC is created (EMTEC is the volume name). The relevant mount entries are:
Code:
:~> cat /etc/fstab | grep sde
:~> cat /etc/mtab | grep sde
/dev/sde1 /media/EMTEC ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
:~>
There's no fstab entry, as it should be, and there is a mtab entry corresponding to the pen-drive, /sde1. However the /media/EMTEC as created (by udev, I suppose) is owned by root, I can't write to it. But if I change (as root) the /etc/EMTEC folder permissions so it belongs to the regular user, i can (obviously) write to it *and* it stays so *between* remounts. Haven't tried a reboot yet. What I'm not sure is if ordered journaling is OK for a pen-drive - or any kind of journaling, for that matter. Or will this significantly decrease flash memory life? Also, the fstab options set in Yast appear to be remembered by whatever creates mtab, as well as /media/EMTEC permissions. Is that so? Where are these settings kept? How does this work?
View 2 Replies
View Related
Dec 25, 2010
My desktop 10.10 is unable to access SOME https websites from all installed browsers (Firefox, Chrome and Opera). In firefox I get the error message "Firefox can't establish a connection to the server at www.[nameofsite.com]" One suggestion that I encountered was that the Root Certificates were outdated and/or corrupted and needed to be reset.
A Google search came with the suggestion:
Fix the root certificates on your system. Open Your browser and navigate to the following URL. Once at the web page follow the directions to reset your root certificates. [URL]
Unfortunately this website is one of the problem connections. Another PC with a fresh installation of 10.10 does not display these problems.
View 1 Replies
View Related
Jan 4, 2010
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
View 9 Replies
View Related
Feb 5, 2010
I am dual booting OpenSUSE and Windows 7 Pro x64. Each OS is installed on a separate 1Tb hard drive. One question that I have tried to Google for a solution with no success is, how do you access ext4 from Windows? Shortly after I installed OpenSUSE, my OpenSUSE hard drive "vanished" from Windows 7. aturally, I can access all my hard drives from OpenSUSE, which does support the NTFS. I am quite sure that I am not the only person who has this problem as I know that dual booting Linux and Windows is quite common.
View 8 Replies
View Related
May 1, 2010
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies
View Related
Feb 14, 2011
I'm migrating my OpenSuse 11.3 (which was update from 11.2, 11.1 ........ ) to a new hard drive. My partitions were reiserfs and in the migration I'm "converting" them to ext4, the conversion process is simple and it works fine for all of them except the root one:
1) I create a new partition on the new hard disk (bigger than the original one)
2) I format it with ext4
3) I copy all the data with cp -a from the original partition to the new one
I already have all the partitions migrated to the second disk, then I have tried to do it with the root partition:
-I've booted with a system rescue CD and I've done !9 2) and 3) with no problems.
-I've edited and changed al entries in fstab and grub conf (menu.lst) to point the new partitions
-I've reinstalled grub and it seemed It will be no problems booting, but
It begins booting, the grub menu appears, It begins booting the kernel, but suddenly:
waiting for /dev/root to appear: OK
fsck.reiserfs -a /dev/sda2
........
mount -o ro,ad,user_xattr -t reiserfs /dev/root /root
and it fails, because sda2 is not reiserfs, but why does it try to mount it as reiserfs if I'm not saying anywhere it is reiserfs?
This is my fstab:
Code:
#/dev/disk/by-id/ata-ST3160211AS_6PT0V05Y-part2 / reiserfs acl,user_xattr 1 1
/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91599607-part2 / ext4 acl,user_xattr 1 1
/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91599607-part1 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91599607-part3 /home ext4 defaults 1 0
/dev/disk/by-id/ata-ST3500630A_9QG94AT1-part1 /mnt/backup auto noauto, defaults, users, exec .....
I've booted it also with SuperGrub2 disk and the same thing happened, so I think it's not a grub problem but I don't wknow why it tried to mount the root partition as reiserfs.
View 7 Replies
View Related
May 22, 2011
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies
View Related
Oct 12, 2010
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
View 5 Replies
View Related
Feb 5, 2011
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies
View Related
