Ubuntu Installation :: Can't Mount Drives After Upgrade
Mar 10, 2011
a few days a go I got Samba messed up and I decided to just reinstall Ubuntu. Ubuntu resides on an 80GB drive and I have 2 1.0 TB drives that I use for storage. At one time (pre-Ubuntu) they were connected to a VIA SATA RAID card and I had them on a software RAID under Windows XP. Both worked absolutely fine under Ubuntu 10.04 (which had bee progressively upgraded from the original install of 9.04.
Now, both drives have been given the same label, and neither one will mount because the file system type is reported as "via_raid_array" rather than the EXT4 that they both should be. TestDisk can read them and identifies the partition as a Linux partition, and the data seems to be there. I have even reformatted one of them and still, it will not mount.
View 3 Replies
ADVERTISEMENT
Jan 10, 2011
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
View 6 Replies
View Related
Jul 29, 2011
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
View 6 Replies
View Related
Apr 30, 2010
After a bit of a rough install, I got 10.04 up and running on an Intel D845GRG motherboard. All seems to be working fine except for USB flash drives. My USB mouse and keyboard work fine, but the two sticks I have (Kingston and PQI) will not mount.
View 4 Replies
View Related
Jan 9, 2011
I installed 10.10 on my workstation but now my system refuses to mount two existing two data drives that were already there... sudo mount /dev/sdc /mnt/data-b gives me: mount: unknown filesystem type 'isw_raid_member'
I didn't change any BIOS settings... My BIOS is not configured for RAID at all, that setting reads AHCI, which should be okay for my kernel (using the stock 2.6.35-24).
I tried to force mount one of the drives with sudo mount -t ext3 /dev/sdc /mnt/data-b
but this gives me an even stranger message:
"/dev/sdc already mounted or /mnt/data-b busy (neither of them are true...)
It's mainly the "isw_raid_member" thing that troubles me... I didn't and don't have a RAID system at all..
View 1 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Feb 23, 2010
Since I never got an answer to my last question:I'll ask something simpler. When Ubuntu is booting up, what directories are used for the boot process up until it mounts other drives (such as an SD card).hink that question makes sense,don't hesitate to ask forclarification, though.
View 6 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Apr 7, 2010
Is it possible to use network storage locations as mount points during installation?
cause i want to separate system (ubuntu) with data (personal files).
eg. if i have 5 computers i don't want to recreate /home/david 5 times.
so i want to mount networkdrive/home to /home in local ubuntu server.
so ALL users home folders could be used and maybe also networkdrive/projects to /projects.
in that way its ok if i by accident repartitioned the local ubuntu server cause all data is not there on that server, but in the data server.
is separating "data" from "logic" good in this case?
and is it possible? what protocol should i use for the mapping over internet? (maybe the server is in Sweden, and the data is in Norway).
View 1 Replies
View Related
Feb 10, 2011
I just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies
View Related
May 24, 2010
After attempted upgrade on my dual bot drive I can no longer boot Windows XP or either of my 2 sata drive.
View 5 Replies
View Related
May 3, 2011
Upgraded. VBox (Win7 - 64bit) runs well, but does not see attached drives. Removed the drives, and attempting to re-attach, usually results in an immediate Windows 7 crash. Even when attached (lucky) - the drives do not re-attach after a VBox reboot. Is there some easy way to downgrade to 10.10??
View 2 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
May 3, 2010
I have an LG DVD+RW and an older DVD drive...FSTAB contains the following:
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
I see a cdrom0 in "Places", but get the following error when access:
"Unable to mount cdrom0. mount: no medium found on /dev/sr0"
I do see the following mount points in the filesystem under media:
/media/cdrom0
/media/cdrom1
I assum my fstab entry is incorrect... not sure how to resolve though. I'd like to get my DVD+RW working, so I can burn a Live CD and re-install from scratch instead of upgrade.
View 8 Replies
View Related
Apr 19, 2011
I was using 9.04 for a while because it was working for me, I decided to upgrade yesterday using the Upgrade button on synaptic to 9.10. Now when I boot I get an error message:
Code:
chroot: cannot execute /etc/apparmor/initramfs: No such file or directory
Mount of filesystem failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
I want to try to fix the problem so I do not have to do fresh installation.
View 5 Replies
View Related
Apr 30, 2010
After upgrading and restarting my laptop, The purple splash screen hangs, and the terminal gives this message.
Code:
Also the boot menu does not show (I cannot open the recovery mode)
View 2 Replies
View Related
May 6, 2010
When I had 9.10 installed I had /home and / on separate partitions but this time, I wanted them both within the same. I downloaded my old home partition to an external drive, wiped the old partitions and installed lucid but now I can't mount the drive. I am trying to use:
Code:
sudo mount -o loop -t auto /mnt/storage/home.img /mnt/oldhome/
but I get an error of wrong fs type, bad option or bad superblock.
fdisk -l shows:
Code:
Disk /mnt/storage/home.img: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /mnt/storage/home.img doesn't contain a valid partition table. But in nautilus it shows it as the full 23.6 gb its supposed to be?
View 1 Replies
View Related
Jun 17, 2010
I posted a similar problem sometime last week...but a little has changed(mainly I can access my files now): I recently performed the auto upgrade to Ubuntu 10.04 and upon restart of my machine I am presented with 3 screens. The first is a simple "GRUB loading". The second is "mount: mounting none on /dev failed: no such device". The third screen is a series of initializations, i.e. /dev/sda1:
clean, (number of files), (number of blocks)
*setting preliminary keymap...
and so on until it hits the line:
*checking battery status
at which point it will cease loading until i press the power button. The next thing that occurs is it kills all the processes it just initialized and shuts down the computer. I read that this is likely a problem from loading the wrong kernel and I can get into my files (using a boot 9.10 boot key). The problem is I don't know what files to change in order to get my system booting the right kernel.
View 9 Replies
View Related
Dec 1, 2010
I just installed kernel 2.6.37-rc3-natty in an effort to clear up the audio stuttering problems prevalent in Maverick. It worked, but now my swap partition won't mount on startup and because of this the computer won't hibernate. I'm using a Toshiba NB305-400 netbook w/1GB of ram, 250GB HDD and 1.6 GHz processor.Here's what's in my fstab file:Quote:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
[code]....
View 5 Replies
View Related
May 3, 2010
Just completed the online update of Ubuntu 10 -> 10.04 LTS. One problem, on boot keeps trying to mount "UDEVD-WORK...." (rest of line disappears before I can write down), which fails because it does not exist.
View 9 Replies
View Related
May 13, 2010
I had 9.10 installed on my IBM Lenovo Thinkpad, x301. I was performing updates as normal, and chose the Upgrade button to upgrade me to 10.04. Everything started fine, but upon reboot, no bueno, Kernel Panic!
The exact message was "Kernel Panic ubuntu - not synching VFS Unable to mount root fs".
I thought this was a grub issue. Since grub2 now is installed... But it was not. I think it ended up being a problem with some of my configuration files.
I have three kernels I tried:
1. 2.6.32-22
2. 2.6.31-21
3. 2.6.31-20
The first threw me into the kernel panic.
The second would hang on "init crypto disks"
The third would hang on "checking battery state"
I noticed (from reading another thread) that while these are loading up that you can click on alt-ctl-F1 thru F6 and get prompt. (I also had my home directory encrypted, thought that was part of the problem, but it wasnt).
Once I get passed the loging, I am able to poke around. I tried manually start Gnome via "sudo service gdm start", but it failed. Said it was missing a configuration file. Then I tried on "sudo dpkg-reconfigure gdm" and it would not work. Saying some configuration files are missing or broken. It also said something about dpkg --configure -a, I am assuming this configures everything...
So I tried "sudo dpkg --configure -a" And selected 'y' to every option. Which basically installs the package creators default settings, and viola! Works.
Just wanted to share that knowledge for the other stuck in the upgrade hell.
Normally I would just copy my files off and reinstall, but it was encrypted... Another headache. I guess good in case someone stole my laptop.
Remember try to "sudo dpkg --config -a"
View 7 Replies
View Related
Sep 9, 2010
I upgraded 9.10 to 10.04 via the web. The program announced it would take several hours, and when I came back to check, computer was off (kids?). Anyway, machine boots and 10.04 starts, but then blinks a few times and goes to a prompt. What should I tell it?
I have a 10.04 disc too, but it won't run from that either (Cannot mount dev/loop0 on filesystem.squashfs failed). Same message when I tried to start a nearby Windows machine with it. Disc "verified" when I made it. What's with that?
View 2 Replies
View Related
Feb 13, 2010
Just moved to Ubuntu from XP. Whole process has gone very smoothly, but left with a small problem (i.e. it isn't actually affecting usability) that I don't seem to be able to fix and can't find on forums/internet. I also have a problem with the Floppy drive, but I've seen that problem elsewhere in the forums.
It's a dual boot system with both NTFS and Ext4 drives. All are visible and fully accessible. I decided to convert one of the NTFS drive to Ext4. That appeared to be successful and was successfully remounted as an Ext4 drive. The drive label is "Data". I did have a bit of a problem getting it remounted so that I could see/use it under my log-in as opposed to just under root. It's at this point I think that I did something to create the problem.
I now have two entries for "Data" in drop down menu for Places. The true one is shown as a standard hard drive icon, but the false one is shown as a different icon - possibly an external drive icon (note that the floppy drive is also showing as the same icon and I can't access that, but I've seen that's a problem elsewhere in the forums).
I can write and read to the true "Data" hard drive. If I click on the other false "Data" icon, I get the message "mount: /dev/sdd1 already mounted or /media/Data busy mount: according to mtab, /dev/sdd1 is already mounted on /media/Data". If unmount the true drive and try to mount the false drive, the system mounts the true drive instead. If I log into nautilus as root, neither the false data drive or the floppy appear in the left hand panel.
View 9 Replies
View Related
Jul 22, 2010
I am using Ubuntu 10.04 on a dual-boot system with Windows 7. Yesterday I upgraded from 2.6.32-23 to 2.6.32-24. After that, pressing the shutdown button and selecting shutdown or restart (whether on the login page or after I've logged in) will only bring me back to the login page. I can shutdown or restart if I do sudo shutdown now, but I'd prefer to use the GUI. Also, there is no sound now (not a big deal, but still not good). And I can't access my storage partition (not the windows7 partition, but a third ntfs partition with data on it). I get the error message that I am unauthorized to mount. I have the only account on this computer, so I should be authorized. This one is a HUGE problem for me, because I need to be able to access my data for work. None of these were problems before the upgrade.
Oh yeah, and quickstart is not enabled. Also, if I go to Power Management, and try to alter what to do when Power Button is pressed, my only option is Ask Me. I know these have been problems/solutions to the shutdown/restart problem in the past.
View 9 Replies
View Related
Nov 21, 2009
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
View 1 Replies
View Related
Jan 28, 2010
i have recently setup and installed Ubuntu 9.04 on a virtulal drive usingVMWare 6.04, installed the desktop gui as well, I need to add other drives for data and loggng, which I did in the VMWare side. I can see the 2 drives in ubuntu, but can not access them, I get he unable to mount location when I try. How can resolve this please as I need these to virtual drives to be used as data drives.
View 1 Replies
View Related
Jan 21, 2010
i used to mount my drives in ubuntu..How to mount all the drives permanently?
View 2 Replies
View Related
Feb 1, 2010
ubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies
View Related
Feb 15, 2010
I tried setting up my own partition table which apparently didn't go well.I have 1 compactflash-disk for linux and 2 hard drives for data which are set up for RAID1. But the RAID-drives doesn't get mounted.This is my first RAID-setup
Code:
me@server:~$ df -h
Filesystem Size Used Avail Use% Mounted on
[code]...
View 4 Replies
View Related
May 3, 2010
I like the 20 second boot from press of power button with my new install, BUT I can't mount drives with xfce's thunar. I can mount them with thunar but this way they still do not show up under places or on my desktop. How do I figure out how to mount them properly?
View 9 Replies
View Related
