OpenSUSE :: After Upgrading To 11.4 No Drives Will Auto-mount
Mar 13, 2011
I was using 11.3, everything worked fine Upgraded to 11.4, now no drives will automount. As a result applications like Nero and K3B cannot find my DVD drive. I can access the drives from an application like VLC where I can enter the device path /dev/dvd
Dmesg and tail -f /var/log/messages output the following error:
118.604577] udisks-daemon[6574]: segfault at 18 ip 00007f5597c6b990 sp 00007fffd2e65470 error 4 in libdbus-glib-1.so.2[7f5597c60000+20000]
[ 118.757166] udisks-daemon[6580]: segfault at 18 ip 00007f557b302990 sp
[Code]....
I suspect there is a bug or incompatablitiy with HAL/dbus/udisks but I cannot track it down.
I upgraded to 10.4 and installed Grub on a wrong drive. This means that I have it on the right drive (the one with Ubuntu) and in the wrong one (the one use for data). I have no problems with booting to Ubuntu or Windows. I can even access the files from the data drive (called Storage) after the systems boots. The thing is that I can't auto mount it anymore (with /etc/fstab) and I don't know how to remove grub from the drive, because I can't find where the boot files are. When booting Ubuntu, a message appears saying that there has been an error when trying to mount the drive, I press 'S', to skip the mounting and it goes to the desktop with no problems after that. I only want to be able to auto mount it, even if I can't remove it.
This is the info from Boot Info Script: Code: Boot Info Script 0.55 dated February 15th, 2010 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for /boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub .....
I'm currently setting up a laptop for my grandparents to use. They have never used a computer before, so I'm trying to make this as fool-proof as possible. The system will be setup with Ubuntu 10.10. In order to save them the hassle of having to unmount USB drives before disconnecting them, I would like to have all USB drives auto-mounted as read-only (possible use cases for now only include them getting data from people, not them copying anything to the drive). I have so far found that gnome-volume-manager is responsible for the handy auto-mount, but I didn't find any way to set options, like always mounting drives read-only.
I've been trying to unsuccessfully auto-mount my drives when starting up. I've made a script that sets me to the root using "sudo -s" and then mounts the drives. The commands to mount the drives work properly when entered into the command line, but when I try running them from an executable, they don't work. What might I be missing?
Just installed natty 64 bit. fully updated the system. i need to hard drives to automaticaly mount when starting the computer. What is the easiest way to do this in natty?
I use Ubuntu 11.04 (gnome) and have a ntfs partiton that shows up in the "places" menu that is normally in the gnome panel. But I think that partition isn't mounted till I click on the entry in this menu (when I want to access it from any other place, shortcuts for example, that doesn't work). How can I correctly mount all partitions I want on startup? Recently I tried something in the /etc/fstab file but don't know if this is correct...
I have a problem that i have tried to solve for a couple of days.server with some internal disks. Those disks are for the core-system and some file server related stuff.Beside the server i got two external LaCie boxes that contains 4x1tb disks each. The disks inside the boxes are RAID5, so the system sees every box as one whole "disk".Now to the problem. I just can�t get those "two" RAID cofigurations two be auto mounted at boot. I have tried to put them in /etc/fstab with a whole bunch of different options but nothing works. The system sees them but don't auto mount them, and i can manually mount them without any problem at all. I have tried to "google" the problem but can't find any similar
i am using fedora 14. Each time i login i have to manually mount my windows drives. Is there any script or system setting which will help me to auto mount my windows drive on startup.
I have a dual boot setup with a fair amount of files in my windows volume. I noticed that the Ubuntu 10.4 GNOME version (at least) does not auto mount my NTFS drive. Of course as I have seen from various post this gets annoying when opening up a program that loads previous files before I for ex, click the '110GB FileSystem' icon from Nautilus or similar...that seems to mount it for me then... I want my 110GB NTFS volume to mount automatically so I dont have to do this process everytime I reboot.
I found a post on the forum (the latest one I could find) below that recommends installing ntfs-config. The post is from May 2008 but mentions 10.10 (via edits) so I'm confused and wondering if there is an easier/default way..or this is still the way to go? After several screw ups editing system files manually, Im very cautious about doing it in this case because its a work computer and frankly the uninsttall or editing the fstab manually worries me.
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
Sometimes when I plug in a USB flash drive, it is mounted to /dev/usb0 instead of /dev/drivename. This poses a problem for me because I have applications that depend on files I keep on flash drives, and having to frequently change the file paths is difficult. I haven't been able to find anything on this topic with a cursory search on Google or through the Debian reference. Heck, I don't even know what /dev/usb0 is (though I would like to learn, in the interest of being less of a noob). This is happening on a Squeeze system running Gnome, so I believe nautilus is what's responsible for auto-mounting my flash drives.
Beyond that, I don't know what other information I should provide; if you need to know something else, ask me (and perhaps tell me how to access that information). Someone on IRC suggested that I didn't have my drives set to mount in /dev/, but I have no idea how I would go about fixing that. If there's a configuration file that deals with this sort of thing, chances are I haven't touched it since installing this system. Debian installer sees usb drive as cd drive, so it adds it in fstab, but with wrong file system options (udf,iso9660) which is not the one your flash drive uses.
my opensuse is not auto mounting USB drives anymore. It was working a few weeks ago! I have an external 500GB HDD and also an 16GB Kingston USB flash disk, both are not being auto mounted.If i do lsusb i get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
i jus migrated from Ubuntu to openSUSE 11.1 on my desktop. N nt was i disappointed by the automatic mounting of pendrive/cdrom, I really can't get it working
I just installed openSUSE 11.2, but I can't use my two optical disk drives /dev/sr0 and /dev/sr1 because the operating system can't find them. These drives aren't listed in my fstab file:
Previously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
I have booted up from openSUSE 11.3 on a USB stick. When i go into Dolphin (the file explorer) and try to open a harddrive, I get the error:
Code: An error occurred while accessing 'MyHardDrive', the system responded: org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action,result)
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
I have a Windows partition encrypted with TrueCrypt. If I start TrueCrypt (or RealCrypt) I can mount the partition through the GUI. before I encrypted the partition I used to auto-mount it at boot using fstab and it would appear in my places bar in the file managers. Is it possible to auto-mount truecrypt partitions from fstab?
Since I installed 11.3 I have noticed the /srv and /local mount points are empty! I also can no longer see my hard drives that have no mount points. I couldn't mount any hot plug media either but now have that fixed. I won't go into the mess I have with my video card and getting the x server started....
I did have Xampp installed to /srv/www but don't even know where it is now!
I had no problems with this in 11.1 until a month ago when I updated and it seemed to keep losing the permissions for these drives as once I accessed them via Dolphin they would be accessible. Now they are not even visible in a file manager!
I'm using openSUSE 11.2, with some eSATA hard drives. For some reason, they're set to read-only, and I can't change it. I set parameters in fstab as fmask=113,dmask=002,umask=0002,rw Oddly, I was able to delete a file in there, but my samba users have read-only access, and I can't use chown or chmod: I get no error message, but nothing happens.
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
I'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
I have two non-system drives with archive files. Each drive is formatted with one primary partition only, occupying all the drive space. In each drive there will be a number of directories with files in them, like this:
I have a new 64 bit workstation (Dell Vostro i7) which I usually keep running for extended periods (read; days and weeks). I have realized that the system completely ignores when I insert a USB stick (LaCie 8Gb USB Key). By ignore, I mean it doesn't get mounted, and /media/ is empty. Interesting enough if I go into YAST and probe for Hardware Information, I find my USB stick there under the USB section. There is no specific entry for the key in /etc/fstab by the way, as far as I know I don't need to specify how a USB stick should be mounted. Auto-mount, when it actually works, is perfectly fine.
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
