OpenSUSE Hardware :: Mount Pen-drives And Cds?
Jan 15, 2009i jus migrated from Ubuntu to openSUSE 11.1 on my desktop. N nt was i disappointed by the automatic mounting of pendrive/cdrom, I really can't get it working
View 4 Repliesi jus migrated from Ubuntu to openSUSE 11.1 on my desktop. N nt was i disappointed by the automatic mounting of pendrive/cdrom, I really can't get it working
View 4 RepliesI just installed openSUSE 11.2, but I can't use my two optical disk drives /dev/sr0 and /dev/sr1 because the operating system can't find them. These drives aren't listed in my fstab file:
/dev/disk/by-id/ata-ST3160815AS_9RA615CK-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-ST3160815AS_9RA615CK-part1 / ext3 acl,user_xattr 1 1
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
Should they be listed here? If so, what do I need to write in order to reference them correctly.
I was using 11.3, everything worked fine Upgraded to 11.4, now no drives will automount. As a result applications like Nero and K3B cannot find my DVD drive. I can access the drives from an application like VLC where I can enter the device path /dev/dvd
Dmesg and tail -f /var/log/messages output the following error:
118.604577] udisks-daemon[6574]: segfault at 18 ip 00007f5597c6b990 sp 00007fffd2e65470 error 4 in libdbus-glib-1.so.2[7f5597c60000+20000]
[ 118.757166] udisks-daemon[6580]: segfault at 18 ip 00007f557b302990 sp
[Code]....
I suspect there is a bug or incompatablitiy with HAL/dbus/udisks but I cannot track it down.
I have booted up from openSUSE 11.3 on a USB stick. When i go into Dolphin (the file explorer) and try to open a harddrive, I get the error:
Code:
An error occurred while accessing 'MyHardDrive', the system responded: org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action,result)
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
View 6 Replies View RelatedSince I installed 11.3 I have noticed the /srv and /local mount points are empty! I also can no longer see my hard drives that have no mount points. I couldn't mount any hot plug media either but now have that fixed. I won't go into the mess I have with my video card and getting the x server started....
I did have Xampp installed to /srv/www but don't even know where it is now!
fdisk -l
Disk /dev/sda: 36.4 GB, 36401479680 bytes
255 heads, 63 sectors/track, 4425 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
I had no problems with this in 11.1 until a month ago when I updated and it seemed to keep losing the permissions for these drives as once I accessed them via Dolphin they would be accessible. Now they are not even visible in a file manager!
I'm using openSUSE 11.2, with some eSATA hard drives. For some reason, they're set to read-only, and I can't change it. I set parameters in fstab as fmask=113,dmask=002,umask=0002,rw Oddly, I was able to delete a file in there, but my samba users have read-only access, and I can't use chown or chmod: I get no error message, but nothing happens.
View 6 Replies View RelatedI recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies View RelatedI have two non-system drives with archive files. Each drive is formatted with one primary partition only, occupying all the drive space. In each drive there will be a number of directories with files in them, like this:
Drive 1:
/directory1/directoryXXX/files
/directory2/directoryXXX/files
/directory3/directoryXXX/files
Drive 2:
/directory4/directoryXXX/files
[Code]...
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View Relatedi used to mount my drives in ubuntu..How to mount all the drives permanently?
View 2 Replies View Relatedubuntu 9.10 when I try to mount internal drivereceive the following massage Error mounting: mount exited with exit code 1: helper failed with:Remounting is not supported at present. You have to umount volume and then mount it once again
View 9 Replies View RelatedI tried setting up my own partition table which apparently didn't go well.I have 1 compactflash-disk for linux and 2 hard drives for data which are set up for RAID1. But the RAID-drives doesn't get mounted.This is my first RAID-setup
Code:
me@server:~$ df -h
Filesystem Size Used Avail Use% Mounted on
[code]...
I like the 20 second boot from press of power button with my new install, BUT I can't mount drives with xfce's thunar. I can mount them with thunar but this way they still do not show up under places or on my desktop. How do I figure out how to mount them properly?
View 9 Replies View RelatedHow can I auto mount all my drive at start up, I want them to be auto mounted.
View 4 Replies View RelatedI am having problem mounting my 2nd hdd and external hdd, it keeps giving error msg saying only root can do it.
rudy@rudy-desktop:~$ sudo fdisk -l
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I am having problem with sdb1 (SFS file system ?) and sdc1 (external hdd)
Quote:
The other one mounts fine. They are all separate physical drives. Another oddity is in that it lists those two drives which are SATA as PATA, but I imagine that is something to do with my BIOS settings being on compatibility settings.
I have recently installed Ubuntu 10.10 on my machine as dual boot using WUBI but on a seperate partition to Windows. Loving it so far, but i cannot get any external drives to mount - i've tried pen drives, camera memory cards and hard drives but nothing comes up.
I have just tried restarting with a pen drive plugged in, and it finally showed something in the computer folder - "memory stick drive" is shown (and my internal CD drive, which i'm not sure was there before.), but i still can't access it and when I try to unmount it gives me the message
Error detaching: helper exited with exit code 1: Detaching device /dev/sdc
USB device: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1)
SYNCHRONIZE CACHE: FAILED: No such file or directory
(Continuing despite SYNCHRONIZE CACHE failure.)
STOP UNIT: FAILED: No such file or directory
[Code]...
I have an Acer Aspire 3500 laptop that I'm running 10.04 on, pretty much everything works OK, and I don't appear to have any hardware problems (I've checked using Gnome Device Manager). When I plug in a USB flash or hard drive, I don't get any drives/devices to mount, although in Gnome Device Manager the USB device appears as a USB Mass Storage Device.
Running tail -f /var/log/messages produces this:
Dec 10 19:44:31 darren-laptop kernel: [ 5800.632058] usb 1-3: new high speed USB device using ehci_hcd and address 4
Dec 10 19:44:31 darren-laptop kernel: [ 5800.765161] usb 1-3: configuration #1 chosen from 1 choice
I installed backtrack3 but i am not able to mount my drives, i have windows-xp
View 5 Replies View RelatedI am looking for mounting windows map drives into linux system. How I will do this?
View 1 Replies View Relatedi am a new user to linux, i installed debian on dual boot with windows 7but now i am unable to access the ntfs drives used by windows originally from the debian OSi am wondering what could be the problem and how can i solve it
View 9 Replies View RelatedI'm currently setting up a laptop for my grandparents to use. They have never used a computer before, so I'm trying to make this as fool-proof as possible. The system will be setup with Ubuntu 10.10. In order to save them the hassle of having to unmount USB drives before disconnecting them, I would like to have all USB drives auto-mounted as read-only (possible use cases for now only include them getting data from people, not them copying anything to the drive). I have so far found that gnome-volume-manager is responsible for the handy auto-mount, but I didn't find any way to set options, like always mounting drives read-only.
View 1 Replies View RelatedAfter a bit of a rough install, I got 10.04 up and running on an Intel D845GRG motherboard. All seems to be working fine except for USB flash drives. My USB mouse and keyboard work fine, but the two sticks I have (Kingston and PQI) will not mount.
View 4 Replies View RelatedUbuntu 9.10 64 bit
Can't mount external usb drives. There are no errors, they just don't show up anywhere.
Also Trash icon has disappeared from bottom panel, is inaccessible from Nautilus - "Sorry, could not display all the contents of "trash": Operation not supported" - and Desktop icons default to 'Keep Aligned' every time I restart.
etc/fstab with a flash drive and an external HDD plugged in code...
i would like to have all my ntfs drives mount @ start up here is the command im currently useing sudo mount -t ntfs-3g /dev/sdc1 /media/D -o forcei have made the folders D E F etc now i know that the command for starting restarting and stoping samba changed in 10.04 so did something change with mounting ntfs drives
View 1 Replies View Relatedhow would i mount mapped linux (ntfs drives) when ubuntu starts
View 2 Replies View RelatedI'm using 4 hard drives (1 of which is a sata drive) and i need help installing raid drivers i cant get these hard drives to mount at all
View 3 Replies View RelatedI've been trying to unsuccessfully auto-mount my drives when starting up. I've made a script that sets me to the root using "sudo -s" and then mounts the drives. The commands to mount the drives work properly when entered into the command line, but when I try running them from an executable, they don't work. What might I be missing?
View 2 Replies View Related