CentOS 5 :: Apache Not Starting When Booting?
Feb 3, 2011I installed Apache, and it works fine. However, when I rebooted my CentOS, httpd did not start automatically. What do I need to do to ensure it starts when the system boots?
View 2 Replies
ADVERTISEMENT
CentOS 5 :: Starting Apache But Cannot Browse In Firefox?
Oct 14, 2009I have a problem, I'm have a course at high school (webserver management) in class this morning we had to install apache, php, ftp and so on but I didn't finish on time so when I got home I was playing around. I'm on wireless here and changed the vm connection from bridge to nat.
normally we had to install apache using yum (yum install httpd) and start the service. that's what I did and then we had to go to firefox (or IE) and type the ip of our server. but when I do I get "problem loading page" instead of the apache default page. I've set httpd runlever 2 to 5 to on and rebooted. but still not working.
Red Hat / Fedora :: Error - Starting Apache
Aug 10, 2010Two days back I installed had setup subversion for my laptop from the following link HOWTO: Setting Up Your Own SVN Server (Using Apache and mod_dav_svn) - Mark S. Kolich
I don't know where I messed up the apache server. Now I am unable to start the apache server. I get the following error message:
OpenSUSE Network :: Apache Not Starting On Runlevel?
Jan 5, 2011Apache is set to start on runlevel 2, 3 and 5, just like MySQL. For some obscure reason this always fails. I tried resetting the runlevels, but this did not help and I always have to start apache manually after reboot.
How can I analyze this problem? In the Apache logs I don't find the cause. Is there an other log I can check?
Software :: Apache Is Not Starting - The Page Cannot Be Displayed
Jan 7, 2010When I try to start Apache2 (apachectl start) the command prompt returns right away. But when I check the processes (ps ax) I can't find httpd. And when I try to hit the server from a browser I get "the page cannot be displayed" error.
View 11 Replies View RelatedUbuntu Servers :: Services Not Starting When Booting
Sep 29, 2010I have a server running 64bit lucid and while trying to get a script to run on boot to start Davmail I appear to have broken something. I have webmin installed but I have been trying to do the majority of things via the command line. I now have davmail starting at boot but a lot of other services don't start anymore, including apache, mysql and webmin. Fortunately SSH still works and I can start apache and webmin from the command line without any problems.
View 1 Replies View RelatedNetworking :: Starting Apache Using Someother User And Not Root?
Jun 24, 2010We have installed apache 2.2.15 webserver on A rhel 5 Linux 64 box using the user wwwadm group www
We can start the webserver using root and it works fine but we dont have root access forever so we want the wwwadm user to have all the rights and we can start/stop/restart the Apache server using this wwwadm user.
Fedora :: Booting Stops At Starting Libvirtd Daemon
May 22, 2010I have a fedora 13 rc3. The problem is that boot the system stops here Starting libvirtd daemon
Prior to that, stop at this point registering binary handler for windows application. I got up to enter the
tty2
to remove Wine
This time to stop here Starting libvirtd daemon
Server :: Hangs At Starting Domino Services During Booting Up?
Feb 11, 2010I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.
Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:
iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.
Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.
OpenSUSE Network :: Starting Apache As A User With Root Privileges?
Jul 17, 2010I have written a simple perl program to add a command to iptables. Here is my code :
Code:
#! /usr/bin/perl
print "Content-type: text/html
";
system("iptables -A FORWARD -s 192.168.0.2 -j DROP");
I put this file in cgi-bin folder of Apache server. Here is my problem : when I run this file with shell as root user it makes change to iptables, but when I use my browser to run this file, it doesn't make any change. I'm sure this is because Apache doesn't have permission to manipulate iptables. How can I start Apache as a user with root privileges ?
Ubuntu Servers :: Starting Apache / Getting Error Invalid Command?
Oct 20, 2010I am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
Ubuntu Servers :: System Won't Shutdown + Apache Not Auto Starting / Fix It?
Nov 12, 2010First post here so I'll do my best to provide the information needed.
System:
Dell Poweredge R310
Xeon 3460 2.8Ghz
4x2GB ram
4x 160GB Sata 7.2k (RAID 10)
Ubuntu Server 64bit
If I type as root, "reboot" or "shutdown -r now", nothing happenings - except the apache2 process stops + the usual "System is going down for reboot now". If I type "shutdown -h now" the system goes down.
Upon booting the server back up, MySQL starts correctly, but Apache2 does not - I have to run "service apache2 start", and it starts up fine.
I feel the 2 issues are related. I've reinstalled apache2 completely (configs and all) and this didn't help - I used yum to install/reinstall it.
Ubuntu Servers :: Apache No Longer Starting Unattended After Reboot?
Nov 18, 2010I have an Ubuntu 10.04.1 AMD64 server running Apache with SSL. In the past, even though I have a passphrase on my key file, I have only needed it if I manually restarted Apache2, never after reboot.
I recently switched from a self-signed cert to one from a CA. I'm not sure if this is what caused it, I also installed a few packages (AWStats, PHPSysInfo and Munin) that all interact with the webserver.
Anyway, I just noticed that now after a reboot Apache starts but doesn't work. I need to kill that process and start a new one with the passphrase (maybe on the console it is prompting me, I mainly use SSH access since the server is headless).
Why did Ubuntu used to 'remember' the passphrase on the self-signed cert but now I need to provide it?
My sever auto-updates so it would be annoying to have this thing go down regularly after a patch that requires a reboot.
General :: Starting And Stopping Apache / No Listening To Sockets Available, Shutting Down?
Sep 16, 2010I have just installed Ubuntu 10.04 and it works fine. Next, I attempted to install Apache 2.2.16 server on the machine. I was able to get Apache installed but I cant't get it to start. The command I used to get it to start is "apachectl -k start" and got the response "command not found". Then I used the absolute path which is "/home/Administrator/Downloads/apache/bin/apachectl -k start" and got the response"httpd: could not reliably determine ther server's fully qualified domain name, using 127.0.1.1 for ServerName(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80.no listening to sockets available, shutting down". Please advise me on what to do. My eyes hurt from looking at the screen for so long trying different options and reading almost all the apache install instructions that exists. Just ready to have it up and running.
View 7 Replies View RelatedUbuntu :: Keep Booting But Keep Installed Programs For Next Time Instead Of Starting From Scratch
Mar 31, 2011I'm booting ubuntu from my android phone via USB and it works great, the thing is anything i install or do while using ubuntu isnt saved the next time i boot from the usb unless its saved in my phones storage. I want to be able to keep booting ubuntu the same way but keep the programs i install there for the next time instead ohttp://mac.bigresource.com/add/add.phpf starting from scratch everytime.
View 3 Replies View RelatedHardware :: Booting Of Fedora 10 Waits At Starting Udev: For 5-6 Minutes?
Aug 9, 2009my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...
OpenSUSE Install :: Starting Apache At Boot / Warning: Script 'K01httpd' Missing LSB Tags And Overrides?
Jul 11, 2011I have installed ZendServer CE on my distro and I have tried to create a startup file in this way:I create the file httpd in the folder /etc/init.d
I run chmod 775 httpd
I execute chkconfig --add httpd on
But this is the message returned from system:
insserv: warning: script 'K01httpd' missing LSB tags and overrides
CentOS 5 :: Apache Error 403 - "Forbidden You Don't Have Permission To Access /bb/ On This Server" - 5.2 With Apache 2.2.3
Jan 20, 2011I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
CentOS 5 :: Starting RSHD Services On Centos 5,3 Box
Dec 18, 2009I need to copy files over from a Solaris 2.6 box to my machine running Centos 5.3. I have to use RCP since the Solaris box is so old that is the only inter-machine copy command available.How do I enable rshd services on my centos box? Detailed explanation would be apperciated since I am from the ssh generation.
View 5 Replies View RelatedCentOS 5 Server :: Apache 'server-status' 404 Not Found + Munin Apache Stats?
Oct 14, 2010I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
CentOS 5 :: Apache 2 Test Page Powered By Centos..what Is It Get On My Computer In The First Place ?
Jul 2, 2010i opened up my browser to surf the web and a page popped up i had never seen before.Apache 2 Test page powered by centos. Any address i put into my firefox browser won't come up and i'm stuck on this test page and,i can't locate it on my computer to remove it.How do i get rid of it and more importantly how did it get on my computer in the first place?
View 10 Replies View RelatedServer :: Apache Server In No Starting / Not Strating On Default Configuration File?
Mar 21, 2011I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies View RelatedCentOS 5 :: Booting CentOS V5.2 Fails With GRUB Error 13: Invalid Executable Format?
May 5, 2009I'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
CentOS 5 :: Resizing CentOS Boot Partition, Dual-booting?
Jun 9, 2009I have a laptop that came with Windows Vista (64-bit) installed. I created a new partition and installed XP (also 64-bit) alongside it.Last night I shrunk my XP partition and created another new partition and installed Linux (CentOS 64-bit) on it. I made an error in judgment and didn't allocate enough space, so I need about 10 more gigs for the Linux partition. It boots up and runs, but I need about 10 more gigs of storage for the files I want to keep on the partition (and yes, they have to be on the partition, I definitely need to know how to do this, not a workaround)I went into Vista and shrunk the XP partition by 10 gigs, so now I have 10 gigs of free, non-partitioned space.
As it stands, when I start up the computer I get the GRUB boot loader. I can boot my Linux install or choose "Other" and be taken to the Vista boot loader. From there I can choose XP or Vista to boot.So, my question is... what is the best way to append the 10 gigs of free space to the Linux partition? Is this something I should do inside of Linux? I have the option to do it in Vista, but the partition shows up as "healthy" but without a file system type.I just don't want to screw up the boot loader, partitions or anything else.This isn't my area of expertise, so if anyone could give me a good suggestion or solid answer
CentOS 5 :: GDM Not Starting Automatically On CentOS 5.4?
Oct 31, 2009this is probably something trivial but how can I auto start gdm on CentOS 5.4??I had to perform a text install due to Anaconda having some issues as I'm running Cent on Sun's VirtualBox.I have tried to add chkconfig --add gdm which didn't work, also there is no init.d script either for gdm so not sure if it's in a directory somewhere or if I have to create it manually??IF I run simply gdm from teh cli then everything is ok and starts fine....
View 2 Replies View RelatedFedora :: 2.6.32.x On F12 Stopped Booting At "starting Udevd"
Apr 23, 2010I need some advice on how to troubleshoot a booting problem. On my F12 installation, kernel 2.6.31.12-174 (and prior) all work fine. Kernels 2.6.32.x all stop booting at "starting udevd" -- even the cursor on the console stops blinking. My system is P4 2.4 GHz with 2 GB RAM on Asus P4PE -- old, but pretty generic.
View 2 Replies View RelatedRed Hat :: Booting Centos 5.4 - CentOS CD Not Found In Any Of The Media Drives
Apr 7, 2010Since RHEL is similar to CentOS posting it here.
Upon booting from DVD, i get the below error: "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
I have IDE Sony DVD RW AW-G170.
BIOS Setting:
Downloaded the CentOS-5.4-i386-bin-DVD image from centos.org from DVD.torrent using bittorrent file.
When booting from the DVD, it gives me the boot prompt:
Upon pressing enter, the log messages of the boot detect the media drive as: hdc: Sony DVD RW AW-G170 IDE ATAPI CD.
The below steps occur:
1) Select the keyboard type: selected us
2) Select the Language : selected us
3) Select the image:
- Local CDROM
- Hard Drive
- NFS Image
...
...
selected Local CDROM
Then the above error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
The booting steps does not ask the for media check step.
The below methods have been tried to solve the problem:
- Burnt the image in another 2 DVDs but the same error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
- Upon burning the DVD image , selected the DVD read speed: 8x. Upon burning the DVD selected 18x for burning. and then tried to boot with that DVD
- At the boot prompt entered : linux hdc=cdrom replaced hdc=hdb but the error remains.
CentOS 5 :: Apache Not Working With New Centos 5 Installation?
Jul 5, 2009U have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies View RelatedCentOS 5 :: Qt4 Designer Not Starting
Jun 22, 2011I recentlly updated my Centos 5.5 to 5.6 usnig yum update, and since then, the QT4 designer cannot be started. If I'm running it (I installed it from source to /usr/local/qt..) the command stuck and nothing happens. The wierd thing is that if I'm running "strace /usr/local/qt/bin/designer4" the program starts.
View 1 Replies View RelatedCentOS 5 :: CentOS 5.3 X86 Not Booting After Clean Install?
Oct 1, 2009I've done some installations and configuration of linux systems for different needs and I've never had such a problem:
* The system is Supermicro X6DVL-G mainboard with two Nocona Xeons @ 2,8 GHz, 2 GB DDR333 RAM, 2x160GB Seagate ST3160827AS SATA HDD, ATi RAGE 128 VGA and an external LG USB DVD drive.
* The role of this machine will be Joomla Web/Mail/FTP server for my company's website
I've tried FreeBSD, PC-BSD and now CentOS 5.3. The BSD based OSes installed and ran with no problem but I had trouble configuring them and I decided to move to something little more familiar. However the BSDs didn't detect the integrated Promise RAID controller but CentOS had no problem with that. After some fight with the initial setup I've managed to made it recognizing the external DVD and install the OS. I'm using the whole stripe for the OS, leaving the linux to determine and create the partitions. The installation went smoothly with no errors, but after restart I get the POST messages and then... NOTHING! No error, no panic, nothing, just a blinking cursor. The first thought, confirmed later by several posts I've read, it's the integrated RAID controller making the issue.
Well, I removed the stripe, disabled the controller from the BIOS and installed again, this time with the two separate disks - the sda is bootable with swap and ext3 and sdb is spare with ext3. THE SAME... Third time - only sda is configured for istallation - again NOTHING. Fourth time - sda is configured for installation and No Bootloader option is selected - SAME.