CentOS 5 :: Hang At Boot After Fresh Install Of 5.2 (Starting Xend)
Apr 15, 2009
I just finished installing CentOS 5.2 x86_64 on a Dell Dimension 3100 (Pentium 4 with 64-bit support). On the first boot, after completing the final config steps (firewall, SELinux, time server, etc), the boot hangs on "Starting xend:". I have completed a successful installation on another Dell machine (different processor), with the same installation options (I recorded all of the steps and followed them for the second installation).
My boot commands in grub are:
root (hd0,0)
kernel /xen.gz-2.6.18-128.el5
module /vmlinuz-2.6.18-128.el5xen ro root=LABEL=/1 rhgb quiet
module /initrd-2.6.18-128.el5xen.img
View 7 Replies
ADVERTISEMENT
Nov 29, 2009
I am booting centos 5.3 on x86-64 machine. The system hands at line "Starting xend:". Is there any way to skip starting xend service during boot or disable it during boot so the system finally reboots.
View 3 Replies
View Related
Apr 18, 2011
I had a server running Centos 5.5, which i have Webmin installed.. The other day i saw that there were updates available so i installed them, and now i have Centos 5.6 installed. I just had to reboot my server to move it, and now it wont boot. It is freezing at "Starting xend:"
View 5 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
May 26, 2010
I have just made a fresh install of Ubuntu 10.04 on my laptop which was already running on windows 7. The installation itself was ok, however, after the restart in the end it did not want to load anything. I get just a blank screen. I am not much of a linux expert, so all I could do is start thee computer via a live cd and see what is there. And it looks normal - windows is intact, new linux partitions are there, GRUB is also there. What should I do? Reinstalling everything is not a proper solution...
View 9 Replies
View Related
Dec 26, 2010
i'm learning some new stuff how to pack RPM so i need to know how to compile starting i install a fresh RHEL5 and want to install bind9 the latest from isc.org
View 1 Replies
View Related
May 13, 2010
service xend status returns nothing - simply moves to next line
service xend start does the same thing
xm list
ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory)
Error: Unable to connect to xend: No such file or directory. Is xend running?
View 5 Replies
View Related
Sep 7, 2009
service xend status returns nothing - simply moves to next line.service xend start does the same thing
xm list
ERROR Internal error: Could not obtain handle on privileged command interface (2 = No such file or directory)
Error: Unable to connect to xend: No such file or directory. Is xend running?
View 1 Replies
View Related
Jul 9, 2009
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
View 1 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Oct 31, 2010
red hat 5 update 4 64bit. linux newby. on an interactive boot i can ping -t my vm linux server from my physical MS XP workstation and a vm W2000 64 bit server until xend is started, after that i get destination unreachable. if i choose not to start xend on the interactive boot i retain connectivity. i have read some blogs that imply this might be a bug - is this so? do I need xend on my vm red hat box that is a database server?
View 1 Replies
View Related
Nov 1, 2010
red hat 5 update 4 64bit. on an interactive boot i can ping -t my vm linux server from my physical MS XP workstation and a vm W2000 64 bit server until xend is started, after that i get destination unreachable. if i choose not to start xend on the interactive boot i retain connectivity. i have read some blogs that imply this might be a bug - is this so? do I need xend on my vm red hat box that is a database server?
View 1 Replies
View Related
Dec 17, 2009
I'm trying to install CentOS 5.4-x86 on a "new" motherboard, it's an ABIT Fatal1ty AN9 32X. I have a AMD 6000+ Dual Core running stable at 3.01 ghz. 4GB of ram(4x 1GB). nVidia GeForce 7600. 2x SATA II 160GB WD RAID 0 and 2x SATA II 1TB Seagate RAID 0. This setup has been running fine as a FTP server for months and has been flawless for games for about 3 years.Right off the bat during initial install it hangs before loading any GUI.Last lines:
NFORCE-MCP55: IDE controller PCI slot 0000:00:0c.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
[code]....
View 2 Replies
View Related
Apr 15, 2009
I recently bought a Toshiba Portege M200 tablet PC and it's caused me no end of grief to load linux on it. I would like to load CentOS 5.x (because my hosting company uses it and I will be able to learn as I run it).
Here are my resources:
I found internet resources to create a boot disk that enables me to see my 8GB Sony USB flash drive via DOS. It works nicely.
I have a laptop drive to USB converter and can access the hard drive directly from my Win XP desktop. I have PowerQuest's Partition Magic Pro (v8.0) and can make Ext2 and Ext3 partitions at will. I have also loaded a program that allows Windows XP to read and write from Ext2 and Ext3. It works well.
I have tried loading boot images from PXE. This option is mostly out because it seems to be a couple levels past my competency (I haven't been able to get it to work).
Given those resources, what's the best way to load either the CentOS live CD... or some other approach?
Since I wrote this, I figured out how to make a boot floppy that can start an external USB CD-ROM/DVD drive. Here are the files on the floppy:
Here's the contents of my config.sys:
Here's the contents of my autoexec.com:
I can boot to the CD and launch linld.com. The problem is that I keep getting a kernal panic message, saying that a memory block could not be addressed. And when I add the following part to the line above: "initrd=d:isolinuxinitrd.img" the install fails and reboots. I have tried to expand the initrd.img and it appears... blank?
View 13 Replies
View Related
Aug 2, 2010
I've down loaded the live CD for SUSE 11.3 and, using isohybrid and dd, I put the contents onto a USB stick and made it bootable. All good so far.
I then installed SUSE on one of the partitions on my hard disk (Windows is also on the disk). I set 4GB for SWAP, 16 GB for ROOT and the rest ~270 for /HOME.
I set the bootloader to be installed in the MBR.
The installation completed with no problems indicated.
I was asked to reboot and did so, removing the usb stick so that 11.3 would boot.
The reboot failed! I was presented with a black screen and nothing else happened.
I tried again, selecting openSUSE 11.3 from the boot menu. - Again a black screen shortly after pressing enter.
I can boot in Failsafe mode and then login with text prompt. I can't boot into runlevel 3 (same problem - black screen)
Does anyone know whether this is a problem with network configuration or graphics?
I have a notebook with ATI Radeon Mobility HD 5650 graphics card and
ATHEROS ar8132 ethernet controller.
View 1 Replies
View Related
Apr 17, 2009
I decided to do a fresh install of 5.3. I dedcided to use the entire HD for the install and not partition in any special way. I told it to format the HD and use the entire HD for linux OS. Just went thru the install with no additional software added, only what was the default install. After prompting for a user name and password i rebooted as requested. The issue is that i recieve no GUI to login to the desktop. Im able to SSH to the box and i tried doing yum update and it did not fix anything.i want to learn the command line but i need the gui for backup.
View 10 Replies
View Related
Feb 15, 2010
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
View 10 Replies
View Related
May 21, 2010
I would like the samba service (smb) to start on boot.
In the terminal (as root) I did:
/sbin/chkconfig smb --add
But after a reboot the samba service still doesn't start automatically. Is there something I'm doing wrong here?
-- Quick side question: Most of my experience is from debian and I'm confused as to why I have to add the /sbin path to most of my commands.
View 2 Replies
View Related
May 8, 2010
I cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
View 6 Replies
View Related
Aug 13, 2011
I have a vps, and the only way to access my vps is using SSH . putty.
After playing around with my vps, learning how certain stuff works and so on, i somehow messed up my server.
Is it possible to do a fresh install remotely using only putty, and nothing else but putty, of my server with centos 5.6?
View 2 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Mar 19, 2009
I'm familiar with linux (Debian/Ubuntu), but new to CentOS. I recently installed CentOS 5.2 on a new server for my radio station. I can log in and do everything fine, save connect to any network. I only have a Broadcom wired nic. I know the wire and ethernet jack work fine, so that lead me to the server's settings. I'm not sure if I missed something somewhere, or a similar post (I'm sorry for double-posting if this has been done before).
There is a static IP address set, and that's done correctly.
From what I've seen, someone would like to see /sbin/lspci | grep -i ether: 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
View 7 Replies
View Related
Nov 30, 2009
I have just downloaded and installed the latest version that I know of, Centos 5.4. I initially selected all of the packages and the installations crashed. Since I am installing it on a private network I couldn't save the info. I tried deselecting the packages until finially figuring out the 'extras' was the problem. I deselected that and the installation went fine. What's on the extra's? Part of the error message was something to do with a Python. I have been trying to use Cobbler, is that part of the 'Extras'.
View 1 Replies
View Related
Feb 1, 2010
I had a fresh install of centos 5.4 x64 on my newly bought lenovo thinkstation D20, the installation went smoothly. after I finished adding users and reboot,I get pass the grub, starting the services, and then.. just blank screen, get nothing there and stuck, can't get into gnome, only option is to power off.the same happens if I install scientific linux, basically same with centos. I also can't boot the scientific linux live cd(the same thing happens, after starting the services, blank screen and stuck). however, I can boot Fedora live cd. but all I want is an EL5.
View 5 Replies
View Related
Apr 1, 2010
I downloaded 5.4 DVD iso, burnt it to DVD and installed it, when booting up it goes through gives loads of green okays, then when going into the GUI (presumably) it shows a blank screen.
I did some googling and found out to run system-config-display, however when I run this the monitor goes blank and does not work, I have tried a few variations of setting the resolution etc. but nothing worked.
View 1 Replies
View Related
Jul 9, 2010
I installed CentOS 5.5 and after the install when the system reboot, it give me a kernel panic error saying that it don't find the drive /dev/sdb4. I didn't install Grub since Ubuntu is already present on the first drive. I let Grub2 OS prober install it in Grub menu. Here is the grub line:
menuentry "CentOS release 5.5 (Final) (on /dev/sdb4)" {
insmod ext2
set root='(hd1,4)'
[code]....
View 3 Replies
View Related
May 12, 2010
Have just installed 5.4 64 bit on an AMD64 x2 system with 4 GB ram running ESXi4.Text based install went fine, but on reboot starting up it gets as far as 'Starting udev' and just hangs. Checking the performance in ESXi it appears to be using 100% cpu.I have left it for half an hour and it does not progress and the only thing to do is to power cycle the VM.I have searched and found a few suggestions for kernel parameters but they did not make any difference. I can't even get in to a command line as it doesn't boot up far enough.I have reinstalled it several times and also checked the MD5 of the downloaded file and all appears Ok.
View 2 Replies
View Related
