OpenSUSE :: Auto Configure - Reinstall To Reflect System In Current State
Apr 17, 2011
Is there a way to get a list of all packages installed since install (that are currently on the system) and upon re-install run an application that will automatically install those packages. This would save greatly on initialisation time (the re-set up afterwards). Essentially, I want to re-install and/or move to another machine and want to the new install to reflect the system as it currently stands.
View 2 Replies
ADVERTISEMENT
Jun 4, 2011
I am a newbie to linux and running ubuntu server 10.10 (no gui), I had it configured with a fixed ip address and all was fine till I changed internet poroviders and got issued with a new router.
I am trying to configure the server to reflect the new settings of the new service provider. here are the contents of /etc/network/interfaces
Code:
auto eth0
iface eth0 inet static
address 192.168.15.52
netmask 255.255.255.128
gateway 192.168.15.1
Just so I got this right can someone tell me if I am right here. address is the IP I wish to give to my server statically. and gateway is the ip of the router. When I try to ping the router I get
Code:
Ping 192.168.15.1 (192.168.15.1) 56(84) bytes of data.
From 192.168.15.1 icmp_seq=1 Destrination Host unreachable
When I try to ping the internet i get :
[Code]...
Is there anyone that can shed some light on where my problem may be. As i said before I got the new router I had been working with the server no problem.
View 9 Replies
View Related
Mar 21, 2010
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
View 7 Replies
View Related
Jun 9, 2011
Code:
I have just inserted a new battery. However, there is no settings that show the capacity and current charge time, etc.
When I click the battery icon. All I get is the current percentage.
Is there anything that will give me more details about my battery i.e. capacity, charge rate, time to full charge, etc?
View 3 Replies
View Related
Mar 29, 2011
There are not SSDs with TRIM support available in my region that fit into my laptop (1.8", IDE, ZIF). I'm running Ubuntu 10.10.
Most articles (or questions on superuser) I've come across concering TRIM (or the lack thereof) date back to 2009, when not many SSDs with TRIM support were available and OS support was still very fresh.
I'm interested in the current situation, but I couldn't find too much information about it.
What are currently the "best practices" for using an SSD without TRIM under Linux?
I've read about the wiper script included with hdparm. Do I understand correctly that I could use this to free unused blocks, e.g. by running it once a month?
Some sources state that HFS+ (the default-filesystem of Mac OS X) doesn't suffer as badly from lack of TRIM as other filesystems. How about linux filesystems? Are there filesystems that are better suited for SSDs without TRIM than others?
View 1 Replies
View Related
May 14, 2010
Can anyone update me a little on the current styate of Radeon Drivers? I have a laptop with an RS690M video card on Slackware64 & Slamd64
There is
1. Kernel driver (drm/radeon.ko) but I am finding it difficult to find comments on it, except that it does some power management stuff
2. Proprietary fglrx had a recent significant update, and now talks to my card after a fashion (Experimental support)
3. OSS Radeonhd for X, which I gather is probably the worst atm but it's what I have in xorg.conf
4. OSS radeon driver, which is supposed to have more work done on it.
I don't need framebuffer stuff - the screen is hard enough for me to read as it is, but I do like to watch the occasional tv program or dvd and I'd like the video to be keeping up in full screen. ATM, Xvid, Opengl, and just about everything fails to, except sdl.
View 4 Replies
View Related
Apr 26, 2011
I have a new clean install of 64bit current slackware on a machine which previously run 12.1 to 13.1. It had suspend to ram working quite reliable before, but now i get black screen (sometimes with nonresponding mouse cursor on it) at every second or third wake-up.
I found out that it is not a complete lockup - full access to kde desktop could be restored by hitting alt+sysrq+s followed by alt+sysrq+l several times. I wonder what is causing this? How to get it to wake up normally at once?
Edit: I've installed latest nvidia drivers (260.19.44) for GeForce 8500GT card - previous version (260.19.21) of drivers exhibited the same behaviour in my current install of slack.
View 2 Replies
View Related
Aug 2, 2011
i did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
View 3 Replies
View Related
May 1, 2011
My linux laptop isn't able to detect the current battery state. I am using slackware64 13.37 xfce with a Toshiba L645 laptop.
This is what I came up with so far.
Code:
lsmod
Module Size Used by
snd_seq_dummy 1479 0
snd_seq_oss 30116 0
[Code].....
I use a program called conky that reports my cpu frequency and most of the time it's always at 0.93GHz instead of 2.53GHz. Sometimes it jumps to 1.20GHz and 2.53GHz but falls back down to 0.93GHz. Is this normal?
View 13 Replies
View Related
Jun 29, 2010
I have the application and kernel module running on my system. In the meantime, I am changing the date and time of the system. However, this change doesn't reflect on log messages of the application that's being executed.
View 5 Replies
View Related
May 2, 2011
I install Opensuse 11.4 on KDE environment then I changed to XFCE. I don't know how to configure for computer auto shutdown after a period of time don't use it.
View 6 Replies
View Related
Apr 24, 2009
I was just wondering if there is a way to capture current state on a machine and create live cd from it?
If not - what is the best way to create Live CD with optimazied system updates and configuration packages.
View 1 Replies
View Related
Oct 23, 2010
I'm trying to list all ports less then 1024 on my current machine which are open in the listening state, one port per line
View 1 Replies
View Related
Aug 14, 2010
Upon boot of my system, I auto run a script that customizes the routing table (i.e., route -n). However, after the system is already booted up and has been running, if a network connection is dropped and re-added, like if one of the several network cables to the machine is temporarily disconnected or other, then the routing table is modified -- I assume by network manager. Presently, I need to manually re-run my script to re-customize the routing table.
I would like to have the script just run whenever there is any change to the connection state of interfaces. Anyone know how to tie in some kind of event trigger that can execute a script upon change in interfaces connection state (i.e., detect change in connection state and run the script)?
View 2 Replies
View Related
Jun 15, 2010
I had recently upgraded my 9.0.4 ubuntu to the latest version, but something must have gone horribly wrong during the upgrade. On boot, it says it has problems and errors loading stuff and when it gets to the desktop, it gets no input from the keyboard or the mouse. Same goes for recovery mode. When trying to run from a live CD the keyboard and mouse work just fine. I have the CD and I wanted to simply reinstall but problem is I don't know how to reinstall over the current installation.
View 1 Replies
View Related
Jan 7, 2011
Whenever, I successfully save a new document, the document's icon does not display in the KDE File Dialog until OpenOffice restarts. The document exists, because trying to do a "Save As" on it produces a dialog that states if one wants to overwrite the document. Also, trying to export a PDF twice has the same outcome.
OpenOffice 3.2.1
scim 1.4.7-174.1
KDE 4.4.4
openSUSE 11.3 64-bit
View 1 Replies
View Related
Aug 31, 2010
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
View 9 Replies
View Related
Sep 18, 2010
I am having lots of problems with fresh install of ubuntu 10.04.1 LTS (dual boot with Win7) and would like to reinstall, however if i just insert the ubuntu CD and boot off of that, when i go to install it wants to create another partition that uses space from my partition for win7. How can i reinstall on my current ubuntu partition?
View 7 Replies
View Related
Feb 7, 2011
I would like to copy my system into a DVD that I can later use as a bootable disk. Having such a disk could be handy, as it would contain current software upgrades.
View 1 Replies
View Related
May 20, 2010
i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
View 9 Replies
View Related
Apr 29, 2010
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies
View Related
Nov 21, 2010
When trying to rebuild a RAID1 on a FastTrak TX4310 controller after a disk was replaced the below message is given:
Code:
[root@SAMBA Samba]# dmraid -R pdc_gigcjhdfa /dev/sdc
Volume "pdc_gigcjhdfa" is not in rebuild state (current: 16)
Rebuild: cannot rebuild from current state!
View 4 Replies
View Related
Mar 5, 2011
I stuck a flash drive into a usb port this morning, and the device notifier failed to show. I opened Dolphin, and I noticed that nothing that should be mounted was showing up in the left pane. I always have seen my Windows install, as well as another partition that has Slackware. I can navigate to /mnt/vista and its all there. I can also go to /mnt/Slackware and its all there. However, the flash drive does not show.I can manually mount the drive and all is well as root. I can't even tell you when this started. I am using Alien's 4.6 KDE packages with all the deps. I just opened mc and checked everything. HAL is disabled and has been for a long time. All did work after disabling HAL.Its not just the flash drive, it effects anything - music cds, blank media, nothing works automagically. Google hasn't
View 9 Replies
View Related
Feb 12, 2010
I was just looking today,and it appears that suse 11.2 no longer uses the xorg.conf file to configure certain hardware...(the only thing written to the file is my ATI info) so where would I find what I'm looking for? (I'm specifically looking to configure my synaptics touchpad mouse)
View 1 Replies
View Related
Jul 14, 2011
I've got a CentOS 5.2 installation with broken package system. When I try to do "yum update" I get lots of "Missing Dependency" errors. How could I restore it to a usable state?
View 6 Replies
View Related
Jan 23, 2011
The last time I used linux (long long time ago) I had a nifty little widget the showed what was going on on all the desktops. Is there a way to add or configure this to the current gnome desktop? All I currently get is an outline to tell me if something is there, but I don't get to see what it is. Sorry for such a noob question.Running Lucid netbook on a system 76 starling. Standard Gnome login, not netbook.
View 1 Replies
View Related
Jul 16, 2011
I ran the 11.04 upgrade. At the end, it reported a failure, implied a recovery would occur and the upgrade then finished. The recovery was supposed to have run sudo dpkg --configure -a. That does not appear to have happened. I am concerned that a reboot will render my system inoperative.Has anyone else experienced a similar issue or have any suggestions? What information should I provide. report.
View 2 Replies
View Related
Jun 15, 2011
we have a customer that ran a sudo chmod +x -R * command on his / filesystem by mistake and now the machine cannot be accessed on the network Has anyone any idea what chmod command to run to restore the system to its original state ?
View 1 Replies
View Related
Dec 13, 2010
I'd like to know how to configure Fedora 14 so my VPN connects and reconnects itself automatically, since the "connect automatically" thing I checked in the network manager doesn't work.Is there a way to make sure that everything uses the VPN, so when for some reason the VPN is disconnected the applications will wait for the VPN to reconnect itself instead of switching to the regular network ?Also since it's pptp VPN I tried to disable Ipv6 but I don't know how to check if I successfully did it, can you guys give me the command line to check that ?
View 2 Replies
View Related
Jun 11, 2010
I am working on a English (US) KDE installation of opensuse 11.2 with a US keyboard and I have some troubles to configure my system in order to work on some French documents using Kate, Kwrite or Eclipse.
For instance, when I save the content of this link [url] on my hard-drive and open the file in Kate, Kwrite or Eclipse, all accentuated characters are displayed as black lozenge signs with a ? inside. What should I fix in my configuration to have those characters show correctly?
A related but maybe slightly different situation is the following: In Eclipse, when I use a French keyboard layout in Eclipse (using the shortcut Ctrl + Alt + K after setup in Configure Desktop > Regional & Language), I can type and display accentuated characters correctly. However, as soon as I spell check my document (I believe Eclipse use aspell for that), all the words containing the accentuated characters that I typed are shown as being wrong. Eclipse suggests some corrections that show up with black lozenge signs with a ? inside...
View 6 Replies
View Related
