I'm installing opensuse 11.2 x64 on my machine.I have win7 installation so I'm making it dual boot.The problem is that the installation is extremely slow. I've started it 20 min ago and it is still at 3% in preparing disks part of the setup.The installation is standard (no shrinking or etc) - I'm installing it on a separate empty partition on my raid volume.
View 7 Replies
I've some problem with openSUSE 64bits and more precisely extreme slowness.
At first, it was during the Installation (net install), each action (click on a button for example) was followed by a global freeze (though mouse was not). The entire configuration (the first part of installation) took me about 1 hour... At that time, i was thinking "ok it's just installation, it will be fast and smooth in the end..."
I was wrong, the system is as slow as the installation but weird thing: it's only when I log on that the system slow down. I mean the booting process doesn't seem slow and I've not seen any errors. So what's going on ?
I don't know if it's the cause or the consequence but i noticed that my cpu was always at 90+ % except when I don't do anything (useful isn't it?) so it may be because the system doesn't manage my cpu the right way. (it's just an hypothesis)
Now configuration information:
Software:
I tried to install openSUSE 11.4 64bits with the net install downloaded yesterday from the official website. I chose Gnome. I don't have swap (see hardware below) and I have a different partition for / and /home
Kernel: 2.6.37.1-1.2-desktop
Hardware:
Asus X5BVN laptop
Intel Core 2 Duo P7350 @2GHz
4GB DDR2 RAM (enough ram -> no swap)
nVidia GT240M 1GB
Intel WiFi Link 5100
Atheros AR8131 Gigabit Ethernet (odd thing: during the installation it wasn't this name)
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
We have 2 machines (quad core intel i5) running suse 11.2. They were clean installs and both suffer from this problem on around 50% of boot-ups. Other times, the system boots quickly and is fine.
Basically, one of the CPU's gets hammered to 100% (according to KDE system monitor) for around 10 minutes after boot up. Although the other three CPU's seem mostly idle, the system is very slow, to the point of being unusable until suddenly the system recovers and runs normally.
I've looked at 'top' and the KDE system monitor and both show no process taking more than a few % of the CPU. So it is a mystery as to what is taking up so much CPU and why it does it some days and not others !
One other thing, if you try to run virtualbox during this time, it (eventually) says that the kernel drives are not loaded - so possibly the kernel is stuck loading drivers. Infact, from dmesg, I can see that the system is still booting but other than the extended time stamps, the only obvious difference between a good boot and a bad one seems to be the line :
Code:
[ 141.794727] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. which is there after a slow boot. The sound works ok (as does everything else).
With the upgrade to 11.3 x86_64 I was very disappointed to find that the time it took to log in to KDE once I entered my password skyrocketed. On 11.2, what used to be a speedy two seconds before I would see the desktop has now turned into 30 seconds, or more sometimes: today it was closer to 45.
disable powerdevil or to disable the KDED modules, both located in the service manager.
Disabling powerdevil does bring my login time back down to where it was in 11.2. I have several questions now: Powerdevil is described as a "laptop power management daemon" in the service manager. Is it truly only for laptops? What features does powerdevil provide? If I disable it will my CPU frequency scaling and other power management features still work?
i was very cautious in installing 11.2; i had previously evaluated sled10sp3, it was great but for some reason it never connected to a dhcp server to get the internet. my fear from installing 11.2 was that i blindly trusted lilo for years as my boot loader (dual booting with xp)
so i took the chance and installed 11.2 with lilo. didn't work; so i went back and installed graphical grub; didn't work either; then installed the system again but with the option "use trusted grub" (which is a text-only boot loader) which worked like a charm on my system.
the thing is, that my system overall boots quickly, except in the part when it starts detecting the hard-disk; which takes 4 minutes detecting the disk and partitions. when it "fails" detecting or doing something with the disk, it continues to boot rapidly then.
My system specs:
- opensuse 11.2 & xp
- default kernel 2.6.31.5-.0.1 using gnome desktop 2.28
- amd athlon 64 x2 dual core processor
- 2.5Gb Ram
[Code]...
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf:
Code:
Section "Device"
BoardName "ATI Radeon HD 3200 Graphics"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "true"
Option "Capabilities" "0x00000000"
Option "OpenGLOverlay" "off"
Option "FSAAScale" "0"
Option "FSAAEnable" "off"
Option "VideoOverlay" "on"
Screen 0
VendorName "ATI"
Rolling back to kernel 2.6.27.37 fixed the problem.
Kde 4.3.1 started booting slow, real slow, real slow.. and logging out real slow. I tried un-instsalling everything since my last update. I then tried moving to the kde 4.3.5. Same problem. Any clues or should I just do reinstall? I am running a ACCER laptop Intel(R) Celeron(R) CPU 550 @ 2.00GHz. I have been using Linux for 10yrs.
View 5 Replies View RelatedUsing 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
View 4 Replies View RelatedAnybody else experiencing slow login times with 11.3 KDE? It's taking 40 seconds from the login screen to the desktop. It's a clean 64-bit11.3 KDE install.
View 8 Replies View RelatedI'm trying to download last Opensuse stable release by torrent but it indicates 11 hours or so! What happens with torrent files? Aleternate methods?
View 3 Replies View RelatedAlright so I've just reinstalled openSUSE 11.2 but apperently some stuff doesn't work the way they used to. YAST install software is incredible slow. The booting took forever when loading all the packages and now installing also takes a loong time and I have a pretty fast internet aswell.
View 9 Replies View RelatedI am still new to linux and just installed opensuse 11.1 and all was fine untill I went to yast, software and ran the online update. Now when I boot up linux it takes a long time and after suse is booted up the HDD led is constant. I did know enough to add VGA=normal in grub and this is what is is displayed when it hangs:
<6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
<4>ata1: link is slow to respond, please be patient (ready=-19)
<3>ata1: SRST failed (errno=-16)
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<4>ata1: link online but device misclassified, retrying .....
<4>ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
<6>sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20
<5>sata_nv 0000:00:0e.1: Using SWNCQ mode
<7>sata_nv 0000:00:0e.1: setting latency timer to 64
It looks like it has something to do with the HDD. I Have 2 HDD's in the computer with linux on the second drive. I also noticed that before updating I could access my ntfs partitions in nautilus and now they do not show up and are not in my fstab file and I do not know how to add them back in.
I have an external hard drive that I use with my laptop and I want it to be mounted at boot. I used YaST to do this by using the Partitioner. I selected the volume, then edited then chose to have the partition mounted at boot.
On next book the computer booted up and mounted the device as I expected but the boot up process took a long time. When I would usually get the desktop I got only a black screen for about one minute, the the desktop finally loads. I tried to reboot a number of times but I still get the same delay.
When I go back and choose to have the hard drive not auto mount and then reboot there is no delay in loading the desktop. So it seems like mounting this device is delaying the loading of my desktop on boot somehow.
Below is the line that is added to my fstab file to auto mount the drive:
I was messing around couple linux distros and a desktop earlier today. When I booted from the Ubuntu disk, it seemed to take like 2-5 minutes on each screen. So was basically taking like 10 minutes before I even got to the disk's menu. When i booted the machine off of openSUSE 11.2 disk it booted nice and fast, then installed without a hitch.When i put the Ubuntu disk into my laptop it booted fast and fine there.I'm just curious if anyone has any ideas why that desktop would seem to disagree with a bootable Ubuntu disk like that. Those things are obviously designed to work with near anything. It's a standard IDE CD-ROM, 7600GT, IDE hard drive, all pretty standard stuff.
View 2 Replies View RelatedWhat can I do to speed up the start-up after login?
I am running OpenSuse 11.3 with Gnome on my laptop (Acer Travelmate 2490) and I need about two and a half minutes from login until the hard disk lamp 'settles down'. This is much longer than I have been used to expect from earlier OpenSus versions. Are there some default applications/processes I could ditch?
I have a Dell XPS M1330 with Opensuse 11.2 and Windows Vista Business in a dual boot hard disk.
I was using Fedora 11 before Opensuse, and it was fast and performed well. However I installed Opensuse because I like KDE 4.3 and this is the best KDE distro.
After the last kernel update my system lost initrd, I restored creating an initrd with chroot, mount and mkinitrd from a rescue disk. After first boot, I reinstalled the kernel update, so the initrd was replaced by the new one created in the update.
However, my system is very slow, I don't know where to look for bad configuration or anything else. The boot process took 220 seconds.
Here is my bootchar,
[URL]
I'm really new to opensuse, and linux in general. I started using 11.2 in may and I'm still having trouble. I started it on a newly refurbished HP Pavillion. It's always seemed to run slow, freezes up when I plug in my external hard drive, won't play music on amarok or it will lag, things like that. When I run it in windows everything works fine. and it has always ran really hot and loud when in opensuse.
To make things worse, lately if I open mozilla, all the programs/windows I have open will disappear, all my tabs will disappear, all the icons on my desktop disappear and my application launcher, clock, etc, all disappear. when i manually shut it down and restart it works fine for a while. I keep trying to find things online but I've got to the point where I'm afraid to mess it up more.
OpenSUSE 11.2 (i586) IBM x3250
Login is taking forever. Nothing is running, server is idle.
Finally get prompt.
Password:
My hardware:
AMD Athlon X2 4800+ (2,5 GHz) + 2 GB DDR2 memory
MSI K9N V2 (nforce 520)
SAMSUNG HD250HJ (SATA, 250 GB)
I'm using OpenSUSE 11.2 with all the released updates are installed. I've got an Windows Xp SP3 on the same hard drive and it's works fine. S.M.A.R.T. says the hdd is 100%. A few days ago I realized that the boot time increased and the hard drive operations takes way too much time. So currently the boot sequence takes 11-14 minutes.
I've already tried to solve this problem but no effect:
1.) cleaned up the root directory to create more free space
2.) plugged the sata cable to another port
3.) changed from AHCI to IDE and reverse in BIOS settings
4.) added ahci, sata_nv into the /etc/sysconfig/kernel file and created a new initrd
5.) searched for problems in the syslog
Just to imagine how slow is currently the system/hdd:
For some reason Firefox loads pages really slow on my 11.3 install. Chrome everything loads fast. I am running the latest of firefox.I have done the usual tweaks to the about:config that I found on the internet. Is there a reason for this and can I fix it?
View 8 Replies View RelatedNot sure if I have landed in right place for this question .Problem FacedI have 30-40 heavy load (Memory operations on heap) processor running with each having 30-40 threads.In one of the thread (of each process), I have file locking operation as explained below (say in thread T1)Step 1 - Lock the file using fcntl(SETWLK) on file f1, Basically using wait lock.Step 2 - Read/write data from another file f2.Step 3 - unlock the file f1.As the memory occupied by process increased, the swap area used will reduce - this continues for a long amount of period. When the free swap space is reduced to 100 MB free out of 2 G and VIRT reduces to 120MB free out of 17G, for T1 thread, Step 3 is not scheduled for more than 300 seconds after Step 1 and 2.
I want to understand why this behavior is present - as per my understanding scheduling will occur within micro-seconds and we can expect that the T1 thread of all process should be scheduled without too much delay.Additional InfomationMachine Info : (uname -a), Linux linux 2.6.16.46-0.12-smp#1 SMP Thu May 17 14:00:09 UTC 2007 x86_64 x86_64 GNU/LinuxMemory Info :Total Memory is 16GB + Swap Memory is 2GBI want to know why this behavior is observed in SUSE
right now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
Am fairly new to linux and like opensuse distro so far and determine to get it to install on my system along side my default windows OS, iva tried 11.1 and manage to get it working, however my main goal was to set it up as a development environment i.e php,java, i had to remove it later on due to certian circumstance, lastweek ive decide to try gnomelivecd 11.2 but ran into a few errors during the final stages of installment while it was Automatically Creating Configuration, with the help of oldcpu i manage to ran installation again without a black screen but this time at the same instance where the error occurs first then direct me to the failsafe screen and am stuck there ever since. Am now downloading 11.3Mildstone6 which was recommended so what am asking now is help to remove those portions,grub and restore MBR. I have tried repairing it by booting from both a winodws7 DVD and external HD but failed, the error returned was an unexpected error occurs try again. However i can boot into gnome from the live CD and Check System > Boot Loader another error popup stating that
Because Of The Partitioning, The Boot Loader Cannot Be Installed Properly.
I'm trying to install OpenSuse 11.2 64bit on my HP Pavilion dv6 laptop. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer LiveCD for KDE, but once I choose Install, after the first selection screen where I can change the default video at the bottom, I just get the openSUSE symbol and it hangs. I have tried all of the options at the first page for video setting or Kernel setting, My system specifications are as follows:
CPU: Intel(R) Core(TM) i7 Q 720 @ 1.60GHz RAM: 4GB DDR3 Graphics Card: nVidia GeForce GT 230M, 1024 MB Dedicated video memory. I should mention that I have currently a dual-boot OS, i.e. Windows 7 and Ubuntu 9.10. I also checked the burnt CD on another machine and the CD worked. So the problem is not because of the CD. I can't find any info on installing Suse on this notebook.
First of all, apologies if this is not the correct place to post this. I recently installed openSUSE 11.2 (Gnome, 32bit) on my newish PC. It is an Acer Aspire X3200 (AMD Phenom X4 Quad-Core, 1.8 GHz, 4096 MB, NVIDIA GeForce 8200 Integrated, can provide detailed specifications if needed). I've to say I am very disappointed with the results so far! Sorry to say this but I'm having a whole load of problems that I never had when I had Vista or with current Win 7. Here are the issues:
1. Slow network performance. I've disabled ipv6 but it is still the same. Not only when I use Firefox, it is also slow when I use console based programs. 2. Instability - Gnome system monitor crashed 6 (or more) out of 10 times I use it. System Monitor users more CPU resources than anything else! Also when I started the PC this morning, I only had the desktop wallpaper. No icons, no taskbar, no mouse movements or menus, nothing. I had to force shut down it after a while. I'm sure we all are familiar with this on XP but I've never seen something like that on Linux!
3. Annoying noise coming every time I move mouse (mainly when scrolling) and even if I'm not doing anything. I suspect it is coming from my HDD indicator as it always blink even when nothing is running. This can't be a hardware issue as I've never had this on Vista or Win 7 (it is virtually silent on Vista and XP but not on SuSE) This noise is driving me totally mad.
4. Slow performance in general. No matter what I do, even typing this on this text window, it seems everything is running so slow. I never had this problem when I was running 10.x on my 6 year old PC. CPU is always running around 20%-30%, when I don't run any other applications but just Firefox (I have Foxclocks, Delicious and FEBE as add-ons and I don't have any problem using them on Vista or Win 7). I am using Compiz, not sure if this has got anything to do with that.
I run a set scripts running under cron which make tar backups to an external
USB HDD.
Wednesday (7 July) night backup 22GiB took about 15min
Thursday (8 July) night backup 22GiB took 5hours 44min :-o
Nothing changed between these runs, the machine wasn't rebooted, the USB
device wasn't unmounted and remounted.
This has been a basic speed change - everything prior to 7 July runs at a
similar speed and everything since then is dead slow.
I've googled around and come up with things like ...
* Make sure the device is mounted async - I believe it is (options:
rw,defaults) but it wasn't remounted in between.
* Make sure that ehc1_hcd is loaded before uhc1_hcd - the entry in
/etc/modprobe.conf looks like it is and anyway there wasn't a reboot
between.
I dread to think how long a full
backup is going to take so I could definitely do with getting back to the
sort of speeds I used to get.
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies View RelatedI'm upgrade my Compiz to 0.8.6.. but it turn run extremely slow on my system (11.2 Gnome)and Intel GPU. Got it from here: Index of /repositories/X11:/Compiz/openSUSE_11.2
Now I'm downgrading to 0.8.4.. Question is, do really I need to upgrade, because I read that theres no new features only bugs fix and speed improvement.
