OpenSUSE Install :: Slow Login With 11.3?
Oct 8, 2010
With the upgrade to 11.3 x86_64 I was very disappointed to find that the time it took to log in to KDE once I entered my password skyrocketed. On 11.2, what used to be a speedy two seconds before I would see the desktop has now turned into 30 seconds, or more sometimes: today it was closer to 45.
disable powerdevil or to disable the KDED modules, both located in the service manager.
Disabling powerdevil does bring my login time back down to where it was in 11.2. I have several questions now: Powerdevil is described as a "laptop power management daemon" in the service manager. Is it truly only for laptops? What features does powerdevil provide? If I disable it will my CPU frequency scaling and other power management features still work?
View 4 Replies
ADVERTISEMENT
Jul 22, 2010
Anybody else experiencing slow login times with 11.3 KDE? It's taking 40 seconds from the login screen to the desktop. It's a clean 64-bit11.3 KDE install.
View 8 Replies
View Related
Nov 1, 2010
What can I do to speed up the start-up after login?
I am running OpenSuse 11.3 with Gnome on my laptop (Acer Travelmate 2490) and I need about two and a half minutes from login until the hard disk lamp 'settles down'. This is much longer than I have been used to expect from earlier OpenSus versions. Are there some default applications/processes I could ditch?
View 9 Replies
View Related
Feb 4, 2011
OpenSUSE 11.2 (i586) IBM x3250
Login is taking forever. Nothing is running, server is idle.
Finally get prompt.
Password:
View 4 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Jun 2, 2010
i'm using OpenSuSE 11.2 and was wondering if there is anyway to set remote login as the default login method.
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Sep 10, 2010
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
View 9 Replies
View Related
May 19, 2010
I'm installing opensuse 11.2 x64 on my machine.I have win7 installation so I'm making it dual boot.The problem is that the installation is extremely slow. I've started it 20 min ago and it is still at 3% in preparing disks part of the setup.The installation is standard (no shrinking or etc) - I'm installing it on a separate empty partition on my raid volume.
View 7 Replies
View Related
Jun 16, 2010
We have 2 machines (quad core intel i5) running suse 11.2. They were clean installs and both suffer from this problem on around 50% of boot-ups. Other times, the system boots quickly and is fine.
Basically, one of the CPU's gets hammered to 100% (according to KDE system monitor) for around 10 minutes after boot up. Although the other three CPU's seem mostly idle, the system is very slow, to the point of being unusable until suddenly the system recovers and runs normally.
I've looked at 'top' and the KDE system monitor and both show no process taking more than a few % of the CPU. So it is a mystery as to what is taking up so much CPU and why it does it some days and not others !
One other thing, if you try to run virtualbox during this time, it (eventually) says that the kernel drives are not loaded - so possibly the kernel is stuck loading drivers. Infact, from dmesg, I can see that the system is still booting but other than the extended time stamps, the only obvious difference between a good boot and a bad one seems to be the line :
Code:
[ 141.794727] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. which is there after a slow boot. The sound works ok (as does everything else).
View 5 Replies
View Related
Nov 29, 2009
i was very cautious in installing 11.2; i had previously evaluated sled10sp3, it was great but for some reason it never connected to a dhcp server to get the internet. my fear from installing 11.2 was that i blindly trusted lilo for years as my boot loader (dual booting with xp)
so i took the chance and installed 11.2 with lilo. didn't work; so i went back and installed graphical grub; didn't work either; then installed the system again but with the option "use trusted grub" (which is a text-only boot loader) which worked like a charm on my system.
the thing is, that my system overall boots quickly, except in the part when it starts detecting the hard-disk; which takes 4 minutes detecting the disk and partitions. when it "fails" detecting or doing something with the disk, it continues to boot rapidly then.
My system specs:
- opensuse 11.2 & xp
- default kernel 2.6.31.5-.0.1 using gnome desktop 2.28
- amd athlon 64 x2 dual core processor
- 2.5Gb Ram
[Code]...
View 9 Replies
View Related
Dec 14, 2009
As the title says. System is openSUSE 11.1 running KDE3.5 with KDE4.3 also installed to use desktop effects in KDE3.5. After update X uses 90% CPU to scroll down a page in FF, OOo or even in text editor, either with KWin and KWin4. With KWin4 desktop effects can't be enabled in system config.
From Xorg.conf:
Code:
Section "Device"
BoardName "ATI Radeon HD 3200 Graphics"
Driver "fglrx"
Identifier "Device[0]"
Option "XAANoOffscreenPixmaps" "true"
Option "Capabilities" "0x00000000"
Option "OpenGLOverlay" "off"
Option "FSAAScale" "0"
Option "FSAAEnable" "off"
Option "VideoOverlay" "on"
Screen 0
VendorName "ATI"
Rolling back to kernel 2.6.27.37 fixed the problem.
View 1 Replies
View Related
Feb 18, 2010
Kde 4.3.1 started booting slow, real slow, real slow.. and logging out real slow. I tried un-instsalling everything since my last update. I then tried moving to the kde 4.3.5. Same problem. Any clues or should I just do reinstall? I am running a ACCER laptop Intel(R) Celeron(R) CPU 550 @ 2.00GHz. I have been using Linux for 10yrs.
View 5 Replies
View Related
Apr 19, 2010
Using 11.2 on self-built pc with AMD 9950 on Asus M3n78 Pro mobo. Boot drive is sata, with an external ntfs 1.5 tb USB/firewire/externalSATA connection (using USB at the moment.) nVidia 9800 GT video card (8300 gt on mobo.)It takes literally hours to boot up and more hours to shutdown this system.e point I am ready to hit hardware reset to continue. This is the 5th cycle with the same problem recurring each time, except sometimes boot occurs in a normal amount of time, but shutdown/reboot always takes hours.
View 4 Replies
View Related
Apr 17, 2011
I've some problem with openSUSE 64bits and more precisely extreme slowness.
At first, it was during the Installation (net install), each action (click on a button for example) was followed by a global freeze (though mouse was not). The entire configuration (the first part of installation) took me about 1 hour... At that time, i was thinking "ok it's just installation, it will be fast and smooth in the end..."
I was wrong, the system is as slow as the installation but weird thing: it's only when I log on that the system slow down. I mean the booting process doesn't seem slow and I've not seen any errors. So what's going on ?
I don't know if it's the cause or the consequence but i noticed that my cpu was always at 90+ % except when I don't do anything (useful isn't it?) so it may be because the system doesn't manage my cpu the right way. (it's just an hypothesis)
Now configuration information:
Software:
I tried to install openSUSE 11.4 64bits with the net install downloaded yesterday from the official website. I chose Gnome. I don't have swap (see hardware below) and I have a different partition for / and /home
Kernel: 2.6.37.1-1.2-desktop
Hardware:
Asus X5BVN laptop
Intel Core 2 Duo P7350 @2GHz
4GB DDR2 RAM (enough ram -> no swap)
nVidia GT240M 1GB
Intel WiFi Link 5100
Atheros AR8131 Gigabit Ethernet (odd thing: during the installation it wasn't this name)
View 9 Replies
View Related
Aug 2, 2011
I'm trying to download last Opensuse stable release by torrent but it indicates 11 hours or so! What happens with torrent files? Aleternate methods?
View 3 Replies
View Related
Feb 9, 2010
Alright so I've just reinstalled openSUSE 11.2 but apperently some stuff doesn't work the way they used to. YAST install software is incredible slow. The booting took forever when loading all the packages and now installing also takes a loong time and I have a pretty fast internet aswell.
View 9 Replies
View Related
Jun 16, 2009
I am still new to linux and just installed opensuse 11.1 and all was fine untill I went to yast, software and ran the online update. Now when I boot up linux it takes a long time and after suse is booted up the HDD led is constant. I did know enough to add VGA=normal in grub and this is what is is displayed when it hangs:
<6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
<4>ata1: link is slow to respond, please be patient (ready=-19)
<3>ata1: SRST failed (errno=-16)
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<4>ata1: link online but device misclassified, retrying .....
<4>ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
<6>sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20
<5>sata_nv 0000:00:0e.1: Using SWNCQ mode
<7>sata_nv 0000:00:0e.1: setting latency timer to 64
It looks like it has something to do with the HDD. I Have 2 HDD's in the computer with linux on the second drive. I also noticed that before updating I could access my ntfs partitions in nautilus and now they do not show up and are not in my fstab file and I do not know how to add them back in.
View 3 Replies
View Related
Dec 15, 2009
I have an external hard drive that I use with my laptop and I want it to be mounted at boot. I used YaST to do this by using the Partitioner. I selected the volume, then edited then chose to have the partition mounted at boot.
On next book the computer booted up and mounted the device as I expected but the boot up process took a long time. When I would usually get the desktop I got only a black screen for about one minute, the the desktop finally loads. I tried to reboot a number of times but I still get the same delay.
When I go back and choose to have the hard drive not auto mount and then reboot there is no delay in loading the desktop. So it seems like mounting this device is delaying the loading of my desktop on boot somehow.
Below is the line that is added to my fstab file to auto mount the drive:
View 9 Replies
View Related
Mar 14, 2010
I was messing around couple linux distros and a desktop earlier today. When I booted from the Ubuntu disk, it seemed to take like 2-5 minutes on each screen. So was basically taking like 10 minutes before I even got to the disk's menu. When i booted the machine off of openSUSE 11.2 disk it booted nice and fast, then installed without a hitch.When i put the Ubuntu disk into my laptop it booted fast and fine there.I'm just curious if anyone has any ideas why that desktop would seem to disagree with a bootable Ubuntu disk like that. Those things are obviously designed to work with near anything. It's a standard IDE CD-ROM, 7600GT, IDE hard drive, all pretty standard stuff.
View 2 Replies
View Related
Jan 6, 2010
I have a Dell XPS M1330 with Opensuse 11.2 and Windows Vista Business in a dual boot hard disk.
I was using Fedora 11 before Opensuse, and it was fast and performed well. However I installed Opensuse because I like KDE 4.3 and this is the best KDE distro.
After the last kernel update my system lost initrd, I restored creating an initrd with chroot, mount and mkinitrd from a rescue disk. After first boot, I reinstalled the kernel update, so the initrd was replaced by the new one created in the update.
However, my system is very slow, I don't know where to look for bad configuration or anything else. The boot process took 220 seconds.
Here is my bootchar,
[URL]
View 9 Replies
View Related
Jul 8, 2010
I'm really new to opensuse, and linux in general. I started using 11.2 in may and I'm still having trouble. I started it on a newly refurbished HP Pavillion. It's always seemed to run slow, freezes up when I plug in my external hard drive, won't play music on amarok or it will lag, things like that. When I run it in windows everything works fine. and it has always ran really hot and loud when in opensuse.
To make things worse, lately if I open mozilla, all the programs/windows I have open will disappear, all my tabs will disappear, all the icons on my desktop disappear and my application launcher, clock, etc, all disappear. when i manually shut it down and restart it works fine for a while. I keep trying to find things online but I've got to the point where I'm afraid to mess it up more.
View 9 Replies
View Related