OpenSUSE Install :: OS 11.2 Hangs At Boot Several Times In Aspire One?
Dec 1, 2009
I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
View 9 Replies
ADVERTISEMENT
May 31, 2010
I have installed the 13.1 usbboot.img to a usb stick and tried to boot up an acer aspire one aod751 but it hangs when it come to the onboard webcam.I am guessing that there is no driver for this webcam.There is no way to disable the usb cam in the bios setup.Is there a command that can be given at boot so that there is no attempt to load the driver for this webcam?
View 6 Replies
View Related
Dec 29, 2009
I recently installed openSuSE 11.2 on an Acer Aspire One, but when the installer try to start the new kernel with kexec it hang up, and if I reboot the system it hang up always, also says that the Acer BIOS is unknown.
View 3 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Feb 16, 2011
I've looked around the threads and can't find this exact problem. I'm on a Compaq Presario F700 running openSUSE 11.3. During boot it hangs in three different places, all of which I can clear up by clicking the mouse buttons or moving my finger on the pad.
The first place it hangs is after: doing fast boot ^[^[^[creating device nodes with udev
The second place is INIT version 2.88 booting
The third place is copying static /dev content.
Like I said, I can get through all three and everything else works great, I just hate having to watch my machine boot to catch these.
View 1 Replies
View Related
Mar 10, 2010
Here's my problem:
New HP Mini 110. Atom N270. 2Gb RAM. 160Gb HDD
I've installed OpenSUSE 11.2 Gnome Live from a USB stick. The installation worked well, but after the first reboot, the graphical loader just hangs with the progress bar having moved only a couple of pixels. Only way to recover is to power-off - CTRL+ALT+DEL does nothing.
When I press 'Esc' on boot, to display the boot messages, I see the boot hangs at the following point:
"Loading drivers, configuring devices:"
trying again, this time adding the boot option "acpi=off" as recommended in another thread, gets me a little further, but the boot now fails at the following point:
"Set System Time to the current Hardware Clock"
Finally, booting in Failsafe mode gets all the way to a text mode login, but this is hardly a long-term work-around.
Has anyone got openSUSE 11.2 working on an HP Mini 110, or at least seen and solved this problem on another system? I can confirm openSUSE 11.2 works fine on my old Acer Aspire One A150, so I assume this is a specific issue on the HP.
View 1 Replies
View Related
Mar 17, 2010
During the boot process the machine (Fujitsu Celsius M470) hangs about 4 min at udev:loading drivers. After that it continues and I can work with the OpenSuse 11.2 system without problems.I activated the debug log in /etc/udev/udev.confthen I see that it is doing a lot in that time, at the end I see the message:udevadm settle timeout queue contains: a long list of pci/usb entries (no entries in any log for this)
in the logfile I find:udevd-work[1071]: '/sbin/modprobe' (stderr) 'FATAL: Error inserting ipmi_si (/lib/modules/2.6.31.12-0.1-desktop/kernel/drivers/char/ipmi/ipmi_si.ko): No such device'there is no ipmi. how can I deactivate the loading of this module?
udevd-work[412]: '/sbin/modprobe' (stderr) 'FATAL: Module input:b0019v0000p0001e0000_e0,1,k74,ramlsfw not found.'
Mar 17 11:35:36 mira udevd-work[418]: '/sbin/modprobe' (stderr) 'FATAL: Module
[code]....
View 1 Replies
View Related
Mar 23, 2011
Tried to install Suse 11.4 on Core 2 Duo 3.16 GHz 4 GB RAM PC alongside Win XP.Installation progress was fine. I rebooted. The gecko appeared and the process bar kept going just about 1/10, then froze. I saw that it froze at the Loading AppArmor Mounting security fs on /sys/kernel/security.I tried safe-mode and it also froze at the same step. tried installing suse 11.3 -- and ended up with the same problem.
View 1 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
Apr 11, 2011
I have an old laptop (asus M6 ca. 6 year old) with dual boot linux windows. Untill Saturday linux=suse 11.0, Saturday I have made an upgrade to opensuse11.4.
I have boot up/down many times almot everything was working properly except the battery status ... I have thought .. "I'll think about it later".
Then out of the blue on sunday my laptop does not boot anymore, the boot hangs. I then have realized taht the failsafe boot was working properly.... ok I have remembered the wrong battery signal and tried the normal boot + acpi=off .. and .. it boots!
OK, the acpi is the problem. I have never made an update of my BIOS (this means it is now old), but I do not really want to update it now. with suse 11.0 the acpi was working properly, I have never have touched the acpi boot option and I had all acpi functionality working (battery, suspend .. etc)
how to let acpi work (at least for the main features .. batetry, fan speed, HT ... etc)?
It can be that the old kernel boot was using some "specific flags", (an installation is cleverer than an upgrade ..?!?!) but unfortunatelly it looks to me that nothing has remained from the old installation .. so I do not know ...
View 2 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
Feb 20, 2011
I installed 11.3 first as update from 11.2. The later described error occured.My first approach was to install 11.3 as full install from scratch, the following error did not disappear.System boots fine when doing boot option "confirm" and answer "no" to haldaemon service. Subsequently no usb devices are recognized by the system.
If i do not skip the haldaemon, either in normal as in failsafe mode,haldaemon reports a "NULL Pointer dereference", which is repeated very often.The system finally stops booting, the screen is full with the following three lines, which seemed to be repeated for about a minute.
"BUG: Cannot handle NULL Pointer dereference at 000000049.
IP: [<c02250bc>] no_context+0x6c/0x150
*pde = 000000000
i removed old unused hardware, as i read in a older thread, that this was the cause for a boot up failure with the haldaemon, but nothing changed.
View 7 Replies
View Related
Jun 7, 2011
I created an OpenSUSE 11.4 PV guest on XenServer 5.6, and about half the time, it fails to finish booting. it starts all the services, and fails immediately before it would display the login prompt. I've spent hours googling for this problem, and can't find any reference to it anywhere, meaning that I may be the first to experience it.
has anyone else done OpenSUSE 11.4 on XenServer 5.6 and had this problem? were you able to resolve it, and how?
View 4 Replies
View Related
Jan 21, 2016
My systemd-udev-settle.service is failing for some reason.
systemctl status systemd-udev-settle.service -a output
Code: Select all● systemd-udev-settle.service - udev Wait for Complete Device Initialization
Loaded: loaded (/lib/systemd/system/systemd-udev-settle.service; static)
[ode]...
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
View 6 Replies
View Related
Oct 17, 2010
I'm running Maverick on an Acer AO521 netbook. I've got a k125 processor and an ATI Mobility Radeon HD 4200 series video card.Since upgrading to 10.10 with the new version of gnome my computer has started getting stuck on blank screen when booting the GUI. Not every time, but most times i boot.If I boot to command line through GRUB there's no problem. When I try to run gnome from the command line i get the same problem.
View 8 Replies
View Related
May 26, 2011
My Acer Aspire Revo 3700 installed fine. I did the commands on this page to prevent the system from hanging on shutdown and reboot, and it went fine.
Against my better judgement, I allowed the system to install a new nvidia driver a couple days ago. Some other stuff was updated as well, so I don't know where to pin the problem.
The Problem: Now, when I shutdown or reboot the system, the system hangs with the Ubuntu logo on screen.
Copy of my dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[Code].....
View 9 Replies
View Related
Jul 23, 2010
I get the newest fedora 13 dvd install & the live cd. Put on the disk and try to install. But the installer hangs on random times, so i cant install the system. Sometimes hangs on the anaconda start, others in the partition tables, others in the language section.
i try to run the live cd and install from there. Ok the first time the cd boot very nice . But when i try to install , the pc hangs again. Other times the boot from live even finish, when the last percents r coming, hangs again.
I all hangs, the dvd drive stop's and never return. So the Fan of cpu start to run very quickly and stay there forever until my patience permits.
So i use the ubuntu installer ( almost 4 years with u fedora, and need ubuntu installer!?shame on u) and search some information about the case. Yes, the last ubuntu boot,install, and run out of the box very quickly!
I see others with Dell & others brands still have problems with hangs and freezing , in boot and installs, so the first thing i search was the kernel parameters and try to use some flags.
I think the source of this kind of problem is the acpi . When i check the flag pci=noacpi or acpi=off , i have see that on the pre-anaconda start, when u choose the english language in text mode, clicking next the installer cant anymore find the media DVD, and the hard disk with the partition table. Sometimes the installer brings me the option to search in the ubuntu partitions, sometimes no.
How to debug and search the source of the problem? Any way? code...
View 2 Replies
View Related
Jul 12, 2011
I have an Ubuntu 11.04 Server set up for my small office whose sole job is to run as a samba file server. The problem is that it randomly hangs. For example, I can connect the clients just fine, however if left idle it tends to take a few moments to work when you try to go back into the shared folder or drive. The client will behave like it is disconnected and is trying to search for the drive only to a few moments later, go right back to normal behavior.
If I ping this server while this is happening my requests will time out for a little while and then just start working. The same thing happens when I try to connect with Putty or through WebMin. One second its unreachable then the next its fine.I have already tried swapping out patch cables (which actually seemed to work for about 2 weeks) and I have patched it to an alternate port on the switch. The only thing I have not done at this time is to change the NIC.All the clients are running Win7 with the exception of two XP machines.Simply put, its like the machine just goes dormant for a while until you ping at it for a while to wake it back up.
View 7 Replies
View Related
Jul 23, 2010
I have F11 running on my Acer laptop and I'd like to install F13 on a newly created partition.I have downloaded the DVD install a couple of days ago and tried to boot it using different options, but always failed. Below my attempts:
1) first option (Install or upgrade): it took a looooong time (like 4 or 5 hours) to get to the Loading vmlinuz message; after a couple more hours it was still there (with 4 or 5 dots more) and I decided that enough was enough;
2) second option (basic video driver): I tried it with and without the nomodeset option and in both cases the Loading vmlinuz message was immediate, but couldn't get past it;
3) first option (Install or upgrade) with the nomodeset option: again the Loading vmlinuz message was immediate, it added up to 10 or 11 dots and then hung;
4) I also tried to boot the same DVD on another laptop (just to rule out media problems) and quickly reached the first install screen, so the DVD is ok I think.
Note that in ALL the above described attempts, when the boot process hang I see my HD led constantly on and also the DVD led flashing.
View 1 Replies
View Related
Jun 28, 2010
I am trying to install ubuntu netbook edition on my Acer aspire one D150. I have tried to do this before with version 9 with no luck so I waited until 10 to see if the problem goes away; apparently it has not. I put the ubuntu install files onto a USB stick according to the instructions from ubuntu here for windows (I have windows xp on the netbook now).
When I shut the PC down and turn it back on with the USB key inserted, the laptop just seems to hang at the ACER splashscreen. This screen is where I could press F2 for setup or F12 for boot order; the buttons do not respond, the USB key appears inactive. Again, it just seems to hang. I've waited for as long as letting it run all night to see if it goes anywhere by the morning with no luck.
View 2 Replies
View Related
Nov 4, 2010
So I did zypper dup yesterday, because I have been a having a ton of freezing issues with this 11.3, and now after a restart I get the green lizard loading screen and then, when it seems like it's about to load KDE all I get is a black screen with a cursor.
It will boot up in failsafe mode just fine. I just rolled back to an older kernel but still same issue, what should I do now?
This laptop has a Intel 945 graphics card
View 2 Replies
View Related
Jun 14, 2010
I have an urgent major problem. I tried to install F8, F9, F10, F11 and F13 live but all gave the same problem, which is I can't install the OS.the problem is Fedora can't communicate with ATI Radeon HD 5145.....the setup just hangs up some times hangs when it tries to run anaconda....
Now F10 X86_64 was installed normally, but after the first reboot.. it gone crazy...and started to display rubbish...going to init 1 and trying to run the GUI I got error server X.
Also ubuntu didn;t work too
My laptop is
Toshiba Satellite L650-10M
Intel CoreTM i3-330M Processor (2.13GHz , FSB:1066MHz , 3MB 2nd Level Cache)
Memory 2,048 MB DDr3 RAM (1066MHz) System Memory
320GB Hard Disk sata
ATI mobility Radeon HD 5145 , 512MB dedicated Up To 2,810MB Graphics
Wireless technologies 802.11 a/B/G integrated Wi-FiTM ;Bluetooth
View 1 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Oct 14, 2010
I have a laptop Acer Aspire 4551-2194. I've installed Debian Squeeze with XFCE and it works great. I have only one problem. I can go through hibernation / suspend, but when I push the power button, the computer hangs. It doesn't come back and I must reboot it.
View 4 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Mar 16, 2011
I'v downloaded the new versions of suse many times. I average 3 to 4+ times before it's successful, bad downloads(bad checksum) or download stops for no reason. I'v used direct link and bittorrent. Bittorrent takes 2-3 times as long. So, I usually use direct link. I can do the download in about 6-8 hours. The first time, it stopped at 334 megs, using direct link. Using bittorrent, it took about 16 hours. I got a bad checksum. Is there a way I fix the file without downloading it again? Suse 10.4
View 9 Replies
View Related
Dec 21, 2009
Had the RC versions of 11.2 running on my laptop but now the release version is out X no longer installs properly, it gets so far through the installation but then goes to a black screen which is totally unresponsive. If I force a power-off/on it only comes up in text mode and I cannot get X to start automatically. I can get startx to work if I manually reconfigure sax2 using 0=radeon but no way can I get this to happen at startup. Seems a very retrograde situation and something that completely got past quality control.
Probably the end of my time with OpenSuse having been a user for over 5 years, at least Ubuntu installs straight in with no problems whatsoever - exactly what I would have expected from OpenSuse.
View 9 Replies
View Related
Apr 3, 2010
I have opensuse 11.2 installed in my AOD250, i want to install linuxmint 8 in a free partition, and dual boot the two linux.
can i do that ?
View 11 Replies
View Related
Aug 7, 2010
I got three times fsck failure during system booting, fixed issue by reinstall whole suse last two times, this time I really do not want reinstall.
View 4 Replies
View Related
Jul 25, 2011
when i restart my system some times it shows grub error as 17 or 15 and in that situation used the dvd rescue mode and run the commands
e2fcsk -f /dev/sd1
e2fsck -b 9130 /dev/sda1
but no use any one that how to trouble shoot these grub errors tell me commands need to be run there.
View 1 Replies
View Related
