OpenSUSE Install :: 11.3 Boot Hangs After Initiating Haldaemon Service?
Feb 20, 2011
I installed 11.3 first as update from 11.2. The later described error occured.My first approach was to install 11.3 as full install from scratch, the following error did not disappear.System boots fine when doing boot option "confirm" and answer "no" to haldaemon service. Subsequently no usb devices are recognized by the system.
If i do not skip the haldaemon, either in normal as in failsafe mode,haldaemon reports a "NULL Pointer dereference", which is repeated very often.The system finally stops booting, the screen is full with the following three lines, which seemed to be repeated for about a minute.
I've bougt a new pc (i5-2050k, Nvidia GeForce 560Ti) and wanted to install Linux beside Windows.But each Linux-distribution (exept the old ones from Mandriva) fails installing/starting als livecd/checking for installation errors/..... while initiating udev.Is there any known bugfix for this problem? Remind, there is just Windows, so don't give me any shellcode to execute
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
I've looked around the threads and can't find this exact problem. I'm on a Compaq Presario F700 running openSUSE 11.3. During boot it hangs in three different places, all of which I can clear up by clicking the mouse buttons or moving my finger on the pad.
The first place it hangs is after: doing fast boot ^[^[^[creating device nodes with udev
The second place is INIT version 2.88 booting
The third place is copying static /dev content.
Like I said, I can get through all three and everything else works great, I just hate having to watch my machine boot to catch these.
I've installed OpenSUSE 11.2 Gnome Live from a USB stick. The installation worked well, but after the first reboot, the graphical loader just hangs with the progress bar having moved only a couple of pixels. Only way to recover is to power-off - CTRL+ALT+DEL does nothing.
When I press 'Esc' on boot, to display the boot messages, I see the boot hangs at the following point:
"Loading drivers, configuring devices:"
trying again, this time adding the boot option "acpi=off" as recommended in another thread, gets me a little further, but the boot now fails at the following point:
"Set System Time to the current Hardware Clock"
Finally, booting in Failsafe mode gets all the way to a text mode login, but this is hardly a long-term work-around.
Has anyone got openSUSE 11.2 working on an HP Mini 110, or at least seen and solved this problem on another system? I can confirm openSUSE 11.2 works fine on my old Acer Aspire One A150, so I assume this is a specific issue on the HP.
During the boot process the machine (Fujitsu Celsius M470) hangs about 4 min at udev:loading drivers. After that it continues and I can work with the OpenSuse 11.2 system without problems.I activated the debug log in /etc/udev/udev.confthen I see that it is doing a lot in that time, at the end I see the message:udevadm settle timeout queue contains: a long list of pci/usb entries (no entries in any log for this)
in the logfile I find:udevd-work[1071]: '/sbin/modprobe' (stderr) 'FATAL: Error inserting ipmi_si (/lib/modules/2.6.31.12-0.1-desktop/kernel/drivers/char/ipmi/ipmi_si.ko): No such device'there is no ipmi. how can I deactivate the loading of this module?
udevd-work[412]: '/sbin/modprobe' (stderr) 'FATAL: Module input:b0019v0000p0001e0000_e0,1,k74,ramlsfw not found.' Mar 17 11:35:36 mira udevd-work[418]: '/sbin/modprobe' (stderr) 'FATAL: Module
Tried to install Suse 11.4 on Core 2 Duo 3.16 GHz 4 GB RAM PC alongside Win XP.Installation progress was fine. I rebooted. The gecko appeared and the process bar kept going just about 1/10, then froze. I saw that it froze at the Loading AppArmor Mounting security fs on /sys/kernel/security.I tried safe-mode and it also froze at the same step. tried installing suse 11.3 -- and ended up with the same problem.
I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
I have an old laptop (asus M6 ca. 6 year old) with dual boot linux windows. Untill Saturday linux=suse 11.0, Saturday I have made an upgrade to opensuse11.4. I have boot up/down many times almot everything was working properly except the battery status ... I have thought .. "I'll think about it later".
Then out of the blue on sunday my laptop does not boot anymore, the boot hangs. I then have realized taht the failsafe boot was working properly.... ok I have remembered the wrong battery signal and tried the normal boot + acpi=off .. and .. it boots!
OK, the acpi is the problem. I have never made an update of my BIOS (this means it is now old), but I do not really want to update it now. with suse 11.0 the acpi was working properly, I have never have touched the acpi boot option and I had all acpi functionality working (battery, suspend .. etc)
how to let acpi work (at least for the main features .. batetry, fan speed, HT ... etc)?
It can be that the old kernel boot was using some "specific flags", (an installation is cleverer than an upgrade ..?!?!) but unfortunatelly it looks to me that nothing has remained from the old installation .. so I do not know ...
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
I created an OpenSUSE 11.4 PV guest on XenServer 5.6, and about half the time, it fails to finish booting. it starts all the services, and fails immediately before it would display the login prompt. I've spent hours googling for this problem, and can't find any reference to it anywhere, meaning that I may be the first to experience it.
has anyone else done OpenSUSE 11.4 on XenServer 5.6 and had this problem? were you able to resolve it, and how?
I've just installed Ubuntu 11.04 on my Early 2008 Macbook Pro and am trying to initiate some form of right click functionality. A mapped key is fine. Apple's ctrl+click is fine too. I do use a usb or bluetooth mouse quite often, but I really need right click functionality for those times that I just grabbed the laptop and ran with it.
I've browsed the forums, ran into a couple of solutions, but they were a bit older and I could not get them to work properly. Also a hindrance here is my relative unfamiliarity with Linux/Ubuntu.
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
I installed OpenSUSE 11.2 and manipultes Window Behavior from Personal Settings so I can't access to my account while login. I use kde. Now I can access the system from the root login. How can I restablish the kde default settings on my account from the root account?
I have just completed a dual boot installation of FC10. The install was done from CD's I downloaded from the Fedora website. The installation (seemed to have) went fine, and the machine still boots into XP if selected from the menu. The Fedora installation does not complete the boot process. I have three bars that move across the bottom of the screen, and the Fedora 10 graphic tuns white, and then the system hangs. I have let it sit at this screen for as long as 30 minutes. The screen will blank occasionally, but returns to the same place if I hit a key on the keyboard.
I have it installed on an old HP E800 netserver, running dual P3-866mHz processors, 2GB ram, a ATI Radeon 7000 video card, and three 36GB SCSI drives, non-raid. I know FC10 will run on this machine, as I have a friend running it on another E800 without any problems. This machine does have on-board video that is disabled only by plugging a different video card in (Phoenix BIOS).
I am using centos 5.5 x85_64 2.6.18-194.3.1.el5 The server is hanging at start up due to the follwoing error
udevd[746] nss_ldap reconnecting to LDAP server (sleeping 4 seconds) udevd[746] failed to bind to LDAP ser er ldap://192.168.0.100 cant contact ldap
It fails and then tries again, and again, each time increasing the sleep time. This is happening before network sercvices are started so ther is no way it can connect to ldap. anyone know a way to fix this problem?
I recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
I have a Dell Inspiron M5030 and ran the live Gnome CD. everything works until I install. The install goes fine and it boots fine but when i log in it just hangs at the desktop with a spinning cursor. No menus no nothing just the wallpaper?
the (almost) last message I see is"shutting down (remotefs) network nterfaceIf I then press Ctrl-Alt-Del the system goes on until:shutting down (localfs)network interface: eth0... and that's it - further go on possible,by any means.No complete shutdown possible.Until present I did at least get nojournal replay at the next startup
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
If I select the top one, I get: Code: Starting up ... with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?
I'm trying to install opensuse using the internet install feature. After the loading linux kernel screen, I see a black screen with a lot of commands/steps. It keeps hanging at the line: [2.202543] [<c0804db73>] kernel_thread_helper+0x7/0x10And at the same time, caps-lock and scroll lock lights on my keyboard are blinking. What does this mean? what i see is this:
Code: [2.121594] VFS: cannot open root device "<null>" or unknown-block (3,1) [2.121873] please append a correct "root"= boot option; here are the available options:
I've created a live and persistent USB boot of OpenSUSE 11.2 KDE according to the howto. It boots and works fine for about 5 minutes and then hangs. Only the mouse will move but I can't click on anything and it never comes back.
