OpenSUSE Install :: 11.4 Hangs On Boot When Installed As XenServer Guest?
Jun 7, 2011
I created an OpenSUSE 11.4 PV guest on XenServer 5.6, and about half the time, it fails to finish booting. it starts all the services, and fails immediately before it would display the login prompt. I've spent hours googling for this problem, and can't find any reference to it anywhere, meaning that I may be the first to experience it.
has anyone else done OpenSUSE 11.4 on XenServer 5.6 and had this problem? were you able to resolve it, and how?
View 4 Replies
ADVERTISEMENT
Jan 27, 2010
I have a dual boot set with XP Pro and 11.2 Is there a way to boot the already installed XP Pro as a guest in VBox? There are many occasions when I would like to jump into XP from 11.2 with the VM. Searches can't seem to find any link to this specifically but this may just be me and the terminology involved.
Found info on mounting an image here but not sure this is what I want.
HOWTO: Mount any VBox-compatible disk image on the host (View topic) - virtualbox.org
View 9 Replies
View Related
Dec 5, 2008
I have setup an debian 64bit minimal, installed the xen-system-2.6.26 for amd64 and with the xen-tools I was ready to go. I set up a guest by using xen-create-image and installed an etch guest. now when I start the guest by invoking "xm create vm1.cfg" and looking into "xm list", the state of vm1 is "blocked". opening the console of vm1 "xm console vm1" prints the following:
Quote:
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
[code]....
That's all. Invoking an "xm shutdown vm1" tells me that the vm1 properly changes the runlevel and cleanly shuts down.
View 2 Replies
View Related
Apr 28, 2011
I just upgraded my stable 10.10 64-bit desktop edition VirtualBox guest to 11.04. Got no errors during the upgrade. When I try to boot into 11.04, it hangs on the boot screen where it says ubuntu with the 5 dots below that. There's no animation on this screen--I think the dots usually have a progressive animation?
I've attached a PNG screen shot of the hanging Ubuntu instance.
View 9 Replies
View Related
Feb 16, 2011
I've looked around the threads and can't find this exact problem. I'm on a Compaq Presario F700 running openSUSE 11.3. During boot it hangs in three different places, all of which I can clear up by clicking the mouse buttons or moving my finger on the pad.
The first place it hangs is after: doing fast boot ^[^[^[creating device nodes with udev
The second place is INIT version 2.88 booting
The third place is copying static /dev content.
Like I said, I can get through all three and everything else works great, I just hate having to watch my machine boot to catch these.
View 1 Replies
View Related
Mar 10, 2010
Here's my problem:
New HP Mini 110. Atom N270. 2Gb RAM. 160Gb HDD
I've installed OpenSUSE 11.2 Gnome Live from a USB stick. The installation worked well, but after the first reboot, the graphical loader just hangs with the progress bar having moved only a couple of pixels. Only way to recover is to power-off - CTRL+ALT+DEL does nothing.
When I press 'Esc' on boot, to display the boot messages, I see the boot hangs at the following point:
"Loading drivers, configuring devices:"
trying again, this time adding the boot option "acpi=off" as recommended in another thread, gets me a little further, but the boot now fails at the following point:
"Set System Time to the current Hardware Clock"
Finally, booting in Failsafe mode gets all the way to a text mode login, but this is hardly a long-term work-around.
Has anyone got openSUSE 11.2 working on an HP Mini 110, or at least seen and solved this problem on another system? I can confirm openSUSE 11.2 works fine on my old Acer Aspire One A150, so I assume this is a specific issue on the HP.
View 1 Replies
View Related
Mar 17, 2010
During the boot process the machine (Fujitsu Celsius M470) hangs about 4 min at udev:loading drivers. After that it continues and I can work with the OpenSuse 11.2 system without problems.I activated the debug log in /etc/udev/udev.confthen I see that it is doing a lot in that time, at the end I see the message:udevadm settle timeout queue contains: a long list of pci/usb entries (no entries in any log for this)
in the logfile I find:udevd-work[1071]: '/sbin/modprobe' (stderr) 'FATAL: Error inserting ipmi_si (/lib/modules/2.6.31.12-0.1-desktop/kernel/drivers/char/ipmi/ipmi_si.ko): No such device'there is no ipmi. how can I deactivate the loading of this module?
udevd-work[412]: '/sbin/modprobe' (stderr) 'FATAL: Module input:b0019v0000p0001e0000_e0,1,k74,ramlsfw not found.'
Mar 17 11:35:36 mira udevd-work[418]: '/sbin/modprobe' (stderr) 'FATAL: Module
[code]....
View 1 Replies
View Related
Mar 23, 2011
Tried to install Suse 11.4 on Core 2 Duo 3.16 GHz 4 GB RAM PC alongside Win XP.Installation progress was fine. I rebooted. The gecko appeared and the process bar kept going just about 1/10, then froze. I saw that it froze at the Loading AppArmor Mounting security fs on /sys/kernel/security.I tried safe-mode and it also froze at the same step. tried installing suse 11.3 -- and ended up with the same problem.
View 1 Replies
View Related
Dec 1, 2009
I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
View 9 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
Apr 11, 2011
I have an old laptop (asus M6 ca. 6 year old) with dual boot linux windows. Untill Saturday linux=suse 11.0, Saturday I have made an upgrade to opensuse11.4.
I have boot up/down many times almot everything was working properly except the battery status ... I have thought .. "I'll think about it later".
Then out of the blue on sunday my laptop does not boot anymore, the boot hangs. I then have realized taht the failsafe boot was working properly.... ok I have remembered the wrong battery signal and tried the normal boot + acpi=off .. and .. it boots!
OK, the acpi is the problem. I have never made an update of my BIOS (this means it is now old), but I do not really want to update it now. with suse 11.0 the acpi was working properly, I have never have touched the acpi boot option and I had all acpi functionality working (battery, suspend .. etc)
how to let acpi work (at least for the main features .. batetry, fan speed, HT ... etc)?
It can be that the old kernel boot was using some "specific flags", (an installation is cleverer than an upgrade ..?!?!) but unfortunatelly it looks to me that nothing has remained from the old installation .. so I do not know ...
View 2 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
Feb 20, 2011
I installed 11.3 first as update from 11.2. The later described error occured.My first approach was to install 11.3 as full install from scratch, the following error did not disappear.System boots fine when doing boot option "confirm" and answer "no" to haldaemon service. Subsequently no usb devices are recognized by the system.
If i do not skip the haldaemon, either in normal as in failsafe mode,haldaemon reports a "NULL Pointer dereference", which is repeated very often.The system finally stops booting, the screen is full with the following three lines, which seemed to be repeated for about a minute.
"BUG: Cannot handle NULL Pointer dereference at 000000049.
IP: [<c02250bc>] no_context+0x6c/0x150
*pde = 000000000
i removed old unused hardware, as i read in a older thread, that this was the cause for a boot up failure with the haldaemon, but nothing changed.
View 7 Replies
View Related
Feb 7, 2011
I have succesfully installed VL6.0 on my desktop (together with other and recently used 5.8 and Sw12.0) install successful but upon booting (i have included 6.0 in my 5.8's lilo) it just stops on a point where in it says:
I am not sure if this is a mem failure (though all of my linux boxes runs properly)
I have re-installed it.. encountered the same. .
As i have checked my SW12.0's dmesg, same line appears but it boots..
Quote:
Code:
And my ISO image is good as per the md5sum. . .
details:
1. installed successfully
2. LILO installed in boot record of /dev/hdc12 --where 6.0 is installed
3. added 6.0 in my current LILO (VL 5.8)
4. ALL BOXES (sw12.0, vl5.8, zw4.6.1) are loading except VL6.0
View 2 Replies
View Related
Sep 27, 2010
Is anyone able to install Xenserver by PXE? I'd really appreciate some help, I've read and and tried all of the documents issued by Citrix/Xen, but because I am so new to Linux in general I haven't been able to get it working.
If anyone can help, I have got as far as the 'client' server to pick up a DHCP address, but fails at the PXE-E32 Open Timeout error message, now I'm stuck, I have a feeling my TFTP isn't configure correctly and I am not sure if I need NFS installed or not, the document is not clear.
View 1 Replies
View Related
May 8, 2010
I've just installed Ubuntu 10.04 netbook remix on an acer Aspire One D250, specs below: Processor Name: Intel Atom N270
Processor Speed: 1.6 GHz
RAM: 1 GB
Graphics Card: Intel Graphics Media Accelerator 950
Storage Capacity: 160 GB
I had to resize the win partition, making a new partition for Ubuntu of about 15GB. I then installed the system. Everything went without problems. I was able to boot once, and verified that everything worked as intented.
However, after that, 90% of the times I reboot the bootup process hangs at a blank screen (with a blinking underscore), immediately after grub selection. If I select "recovery mode" in grub I can see the bootup messages, but the process hangs, all except one time, right after:
Code:
[2.304418] ata2: DUMMY
[2.304487] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq28
[2.304584] ata4: DUMMY
and does nothing more. There are no error messages or hints to the source of the problem, to my eyes.I've noticed that sometimes even the loading screen of the live cd will hang indefinitely, leaving me no choice other than a hard-reboot.
The rare times that the system does boot normally, everything works normally. I've tried installing using both the ext4 and ext3 filesystems. I couldn't find anything like this on the forums. Am I doing something wrong? Do you need more details?
View 9 Replies
View Related
Mar 28, 2010
Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
View 6 Replies
View Related
Mar 12, 2011
I'm trying to install opensuse 11.4 but I got this error:
"The bootloader is installed on a partition that does not lie entierly below 128 gb. The system might not boot if BIOS support only lba24(result is error 18 during install grub MBR)"
What should I do before click next step to install? I installed opensuse with this error and some times opensuse can boot and some not. At least I was able to boot safemode.
View 5 Replies
View Related
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
View 1 Replies
View Related
Mar 8, 2010
I suspect this is a 'new Grub' problem. I installed OpenSuse 11.2 from DVD into one (sda10) of several partitions (the others containing other operating systems):-
/dev/sda1 * 1 63 506016 6 FAT16
/dev/sda2 64 4865 38572065 5 Extended
/dev/sda5 64 960 7205121 7 HPFS/NTFS
/dev/sda6 961 1859 7221186 83 Linux
/dev/sda7 1860 2759 7229218+ 83 Linux
/dev/sda8 2760 3026 2144646 82 Linux swap / Solaris
/dev/sda9 3027 3924 7213153+ 83 Linux
/dev/sda10 3925 4865 7558551 83 Linux
I use NT Boot Loader for the multi-booting on the basis of chain-loading the boot sector of Linux partitions. (It is not destroyed by MS re-installations; and is actually very easy to use). I also have an older Grub shell boot floppy which can do likewise:- root (hd0,x)chainloader +1 boot FWIW I found the disc partition & boot loader parts of the installation a nightmare. Difficult to know what it is going to do; and I am sure it *did* fiddle with parts I asked it to avoid. Horribly, it did *not* make me a dedicated Suse boot floppy like I checked. (This is always the safest boot option for a new install: it leaves the present boot system intact, and provides an independant way of loading your latest. You can refine things later). I had also checked to have the boot sector on the *root partition*.
I have never been able to get into the Suse. NT Loader does not like the partition boot sector. Nor does (an older) Grub from its boot floppy. I have tried the DVD in 'system repair' mode, when it finds things wrong and corrects them, same next time... It offers a way of directly booting a selected system; that did not work.
Any suggestions? I can provide more precise error msgs, but it is tedious; and system repair from DVD dicey. I feel that *the partition boot sector is not being properly set up*.And I want to be able to make a dedicated boot floppy; how? I have an identical problem with Ubuntu, which makes me think it is related to the 'new' Grub.
View 3 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Mar 18, 2010
I have installed an opensuse-11.2 guest-vm under my opensuse-11.2 host-os. Now I would like to export it and import it on a Dell Bladeserver which runs citrix xenserver 5.0.0. Is this possible? How would I do that?I have the disk image of the vm and probably somewhere exists a XML description of the vm. What comes next?
View 1 Replies
View Related
May 11, 2010
I'm trying to install the Guest Additions for a VM running a guest Lucid Lynx Server. The problem I'm encountering is this: The vboxadd-install.log for vbox says it "couldn't find the sources of your current Linux kernel" and to "Specify KERN_DIR=<directory> and run Make again."
View 4 Replies
View Related
Mar 4, 2010
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
View 1 Replies
View Related
Apr 3, 2011
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies
View Related
Jul 14, 2011
Whenever I boot up Fedora 15 on Virtual Box, I get the message " gnome 3 could not load " and I installed all the packages needed to install Guest Additions, but even when I mounted the file, the ONLY file I could find online that was VMBoxGuestAdditions.iso or something like that, I mounted it, I tried installing, but nope, it gives me an error message that it can't. I have the latest version of VirtualBox and I've been on several forums and looked at many places but I can't fix it. I also have a problem where when I boot it up it says " the system is optimized to support 32 bit but it is currently 64 bit go here and click this to fix it " or something like that. and I can't figure out how to fix it in Virtual Box.
View 1 Replies
View Related
Apr 20, 2010
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
View 9 Replies
View Related
Dec 20, 2010
Disk 1 of my software Linux-raid mirror failed but not before breaking my OpenSuSE 11.1 (KDE 3.5) domU. Dom0 is also 11.1 and is working fine. I have another domU running a Novell fileserver and I think that is OK too.
Both domU systems have dedicated mirrored partitions and it seems the OpenSuSE guest was sitting on some sectors which went bad. The drive is on its way back to Seagate for replacement under warranty and the rest of the system is plugging along on the remaining 750GB Disk 0.
I want to somehow repair SuSE 11.1. The symptoms are that I cannot VNC into it remotely and can only get in via the dom0 virtual manager in YAST. It won't let me use the partition manager via YAST. It also randomly drops the vnc connection with dom0. YAST won't let me manage software either.
Putting the original DVD in the drive and rebooting doesn't do anything for domU guests. It is only visible to dom0.
I don't want to blow the whole thing away and start again anyway.
Is there any way to do an online repair via the shell?
View 1 Replies
View Related
Mar 8, 2011
I am have some issues getting VboxAddtions installed. I try to mount a shared folder and I get... FATAL: Module vboxvfs not found. When I try to install the additions I get...
Code:
jgleaso@linux-s7o8:/media/VBOXADDITIONS_4.0.4_70112> sudo ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........
[code]....
View 4 Replies
View Related
Mar 19, 2010
11.2 is installed as a guest under Citrix XenServer 5.5.2. When I try to go to runlevel 5, the X server logs say that /dev/fb0 is not found, and that no screens are found. The only other errors in the log are that it can't locate a core keyboard or mouse.
View 2 Replies
View Related
