OpenSUSE Install :: No Network After Hibernate 11.2?
Jun 9, 2010
Just installed 11.2 (32bit)(again) and the same error happens as on the previous 11.2 install that the (cable)network cannot be found after a hibernate (to disk). There is no problem after a fresh start. (the DVD checksum is correct)
Some other installation hickups (just for info) Starting a direct installation from the DVD No mouse or keyboard connection (I had to reset and use the live session) from the live session install. the partitions are re-mounted by Suse during installationsetup after I unmounted them to be formatted.
View 2 Replies
ADVERTISEMENT
Mar 13, 2011
The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary
The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment
There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)
View 4 Replies
View Related
Sep 15, 2011
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies
View Related
Apr 5, 2010
I can't hibernate Windows after I install OpenSUSE 11.2
View 3 Replies
View Related
Dec 24, 2008
I have openSUSE in a dual-boot environment with Win Vista. Everything worked fine with 11.0, but after installation of 11.1 Vista does not hibernate. The screen gets dark, but after a while it turns on again so I can see that Vista did not hibernate, but just lock the session. In another forum I was given the tip to add makeactive to the Vista entry in menu.lst. This worked for the initial problem, but got me a new one: the computer booted straight into Vista without showing Grub, so I had to reinstall SUSE (after doing this Vista once again does not hibernate).
how to fix the hibernation problem or what changed from 11.0 to 11.1?
View 9 Replies
View Related
Aug 3, 2010
Installed openSUSE into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.
Reopening the lid and will see a screensaver password screen immediately.
Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?
This also happens with Debian that this laptop is dual booted with.
View 1 Replies
View Related
Apr 13, 2011
pm-hibernate and pm-suspend only work the first time after booting into runlevel 5. This behavior is reproducable. pm-hibernate starts out correctly but then hangs the system bevore it gets to save the image from memory to disk. The computer locks up and does not power down.
pm-suspend: on wake up there is no signal on the screen (pm-suspend called from X environment or text terminal shows same result). I spent some time reading information on s2ram s2disk and added the follwing options:
S2RAM_OPTS="-f" in
/etc/pm/config.d/00meine.config
(display adapter is GForce4 nvidia with the closed source nvidia driver for accel)
splash = n in
/etc/suspend.conf - to get some more information during the suspend / hibernate.
Any ideas to get pm-hibernate / pm-suspend to work more than one time after boot??? Hibernate would be a great start for daily work and for energy saving.
horstausdemwald PS: In runlevel 3 pm-hibernate works various times from a text terminal. Under the same condition pm-suspend leads to a scrambled text terminal after resuming (some help on this: using vga=normal in Grub). The computer continues to work - though without visual aid - when the text terminal is scarambled. For example Runlevel 5 can be called blindly from the text terminal.
View 8 Replies
View Related
Nov 5, 2010
I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies
View Related
Nov 6, 2010
I just installed FEDORA 14 on my PC which already had Vista. I am able to dual boot through the GRUB boot loader. I am facing an issue where wired network in FEDORA stops working if I hibernate Vista. I really would like to be able to hibernate both to quicken the startup times.
Here are the steps:
1. Boot to Fedora (everything works fine including wired network)
2. Hibernate Fedora
3. Boot to Vista (everything works fine including networking)
4. Hibernate Vista
5. Boot to Fedora. It loads up fine, but wired network status icon keeps spinning and then results in a kernel package crash. I already reported the crash to Fedora.
6. Hibernate Fedora and boot to Vista (Vista resumes fine from hibernation and everything works in Vista including networking).
Is Fedora supposed to work when both Fedora and Vista are hibernated in a dual boot PC?If I shut down Vista, and then resume Fedora, networking works fine. So there is something in Vista hibernation that causes Fedora networking to fail. This issue remains even if Fedora is restarted (not hibernate/resume).
View 4 Replies
View Related
May 15, 2010
Recently I hibernated my computer, then when starting up again managed to boot into Windows instead. When I rebooted back into Ubuntu 10.04 my network card had stopped connecting to the internet.'s not a problem with my connection -- I'm posting this form Windows just fine. Using the network tools tool I can see that the card is inactive.I can use ifconfog to reactivate it, but it still won't connect.Attached is as many commands as I could find that provide information about the card
View 2 Replies
View Related
Apr 10, 2010
I'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies
View Related
Jan 5, 2011
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Mar 12, 2011
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
View 9 Replies
View Related
Jan 16, 2010
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
View 8 Replies
View Related
Jul 4, 2010
I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies
View Related
Feb 24, 2011
Just installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
View 6 Replies
View Related
Apr 5, 2010
I've just installed OpenSUSE 11.2 instead of 11.1 and installed a new kernel 2.6.33. And now I have a problem. When I try Shutdown -> Hibernate under simple user my screen becomes black and nothing happens. Then I move my mouse or press an key and I see my desktop and a window that asks me to enter my root password. I thought there is some problem with permissions so I logged in as a root and tried to hibernate but everything went the same way except there was no window to enter root pass. I checked my kernel config and hibernate is on there.
View 6 Replies
View Related
Oct 15, 2010
Running 11.3, kde4 unstable, hibernation worked til the 5th of this month, the system is updated as of today
Hibernate option exists in kmenu but nothing happens
If I look at /var/log/pm-suspend.log it is dated 10 days ago and the hibernation was a success
If I run /usr/lib/pm-utils/bin/pm-action nothing happens nor gets displayed
View 9 Replies
View Related
Jul 24, 2010
I have configured OpenSuSE 11.1 in VirtualBox and Networking was working fine and I was able to access network. Yesterday I recieved update notification from SuSE and updated machine. Now after restart eth0 is not comming up. In Hardware profile I can see Network Card but it is not configured automatically. I don't know how to configure it. Virtualbox Networking was working before latest update and just tried in other virtual machines.
View 9 Replies
View Related
Mar 2, 2010
I am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.
View 3 Replies
View Related
Jun 10, 2011
I wanted to avoid having to use my CDs, DVDs weren't an option, and I didn't have very large usb sticks. It seemed my only option for installing openSUSE onto my laptop was with some sort of network install/boot.
I ended up finding this really cool service, netboot.me. What you can do is download a very small image (<1MB) for a floppy, USB stick, or CD, and then boot off of it. Then you can either install pre-defined distros over the network (straight from the distro's servers), or you can make an account (by connecting your google account), and then make your own configuration. I managed to make a configuration for openSUSE 11.4, and I was able to completely install it, via only using one floppy disk and the internet!
My first step in the process was to download the floppy image. Since I was on a windows computer, I then downloaded rawwrite for windows, and I wrote the image straight to the floppy. After that, I restarted the computer and booted from the floppy. It loaded the image, then asked me to press a key or wait for 3 seconds. In order to boot from my configuration, this was the point where I had to press a key, and then choose the option of loading the custom configuration. The configuration I made has an ID of 434001 (which anyone is free to use). Unfortunately, according to their community, the gPXE "network stack" isn't very optimizied, so the initial two downloads took awhile (my speed was locked at 65 kB/s.)
It then began booting in the installation environment, which took about 15 minutes, although download speeds were now back at normal, faster speeds. I configured my installation, and let the package downloading begin!
View 9 Replies
View Related
Sep 10, 2010
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
View 9 Replies
View Related
Jan 8, 2010
How can I install the WMP300N driver into the network install disk so that I can connect to the network to install Open Suse ?
View 3 Replies
View Related
Mar 16, 2010
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies
View Related
Jun 8, 2010
Wubi doesn't let me set the swap file size, so on installation it only creates a swap file of a few hundred megabytes. Because of this, i cannot hibernate my netbook (eeePC 1005HA), which has 2 GB of RAM.
Creating a 2 GB swap file alongside of the original one using the tutorial here did work, but hibernate doesn't seem to work with it. For this reason i thought increasing the original swap's size instead of creating more would be a way to solve my problem.
View 2 Replies
View Related
Apr 17, 2010
Where is /etc/network/interfaces located?Or where can i find the interfaces?
View 9 Replies
View Related
Apr 7, 2011
to start the network in the background, would checking the box B of the service network in yast? What is the utility network-remotefs service?
View 1 Replies
View Related
Jun 4, 2011
I am in a dual boot with Ubuntu and win 7 wireless. When I install 11.3 I no longer have Ubuntu. Is there a process or procedure to assure multiple boot while I attempt to connect suse to my network
View 5 Replies
View Related
Jun 30, 2011
I'm installing 11.4 on a late-2010 Macbook Air. I've forgotten my USB ethernet adapter, although I'm not sure if it would even work in OpenSUSE. Is there a way I can install packages manually (via USB drive) to get wireless working?
View 1 Replies
View Related
