my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10 ,but after we order the boot we got a loading screen for ubuntu then this error appeared
[code]...
also , the labtop cannot boot from usb coz no option for that in BIOS. what can i do to solve each problems?
my friend using XP and it was closed because he didnt activate it . he want to try Linux , i adviced him to use UBUNTU 10.10, but after we order the boot we got a loading screen for ubuntu then this error appeared
Quote: busybox v1.15.3 ( ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) enter 'help' for a list of built-in commands. (initramfs) stdin :I/O error mount: mounting /dev/loop0 on //filesystem.squashfs faild: no such device can not mount /dev/loop0 (/cdrom/casper filesystem.squashfs) on //filesystem.squashfs udevd[75]: worker [171] unexpectedly returned with status 0x0100 udevd[75]: worker [171] failed while handling ' /devices/virtual/block/loop0'
i change the cd to another one but an error was changed to :.............
So i insert the ubuntu 10.10 in the dvd and boot it. The menu comes up and i choose to install ubuntu. After that it shows some black screens and this error:
(initramfs)mount:mounting/dev/loop0 on//filesystem.squashfs failed: Input/output error cannot mount /dev/loop0(/cdrom/casper/filesystem.squashfs)on//filesystem.squashfs
The disc aint scratched. I tried installing from Windows but i got another error.
And for some odd reason Ic ant make a removable startup disk:
I've just got a new laptop with 4GB RAM available, in order to fully utilize the available memory I'm going to install Ubuntu Lucid Lynx 64bit, but when I boot with Live CD, I always get the following errors:
Code:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
xubuntu iso was downloaded with wget on Kubuntu, I did a md5sum checksum in terminal which passed, also K3b's check passed. K3b burned iso with no errors, I set speed at 4x. I made two coasters before getting this far but it still won't get past the BusyBox built-in shell prompt after choosing my language and staring at the xfce mouse for a minute:
Code:
BusyBox v15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
(initramfs) Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
is what I get when trying to boot live cd on both my Linux PC and Windows XP box.
I upgraded 9.10 to 10.04 via the web. The program announced it would take several hours, and when I came back to check, computer was off (kids?). Anyway, machine boots and 10.04 starts, but then blinks a few times and goes to a prompt. What should I tell it?
I have a 10.04 disc too, but it won't run from that either (Cannot mount dev/loop0 on filesystem.squashfs failed). Same message when I tried to start a nearby Windows machine with it. Disc "verified" when I made it. What's with that?
I have had a dual boot on my system since first trying Ubuntu a few months ago.I had a few problems when i upgraded to 11.04 (mainly due to the new desktop Unity), but after some great help here, we had the old desktop running again.I have Windows running on my spare Computer in case i should need it for any reason, though can not think of one lol Now i am used to Ubuntu (from the using side, get lost in terminal etc so here i come if i need help) i decided i would totally commit my main computer to Ubuntu.I downloaded the latest iso from the Ubuntu site, and burnt it to CD, inserted in my main computer & rebooted. It goes past the first purple ubuntu page (hit a key to choose language & also get a selection Menu) then goes to black screen and i get:
BusyBox v1.17.1 (ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash)Enter 'help' for a list of built-in commands.(initramfs) mount: mounting /dev/loop0 on //silesystem.squashfs failed: Input/output errorCan not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs(hope i typed that i correctly)I have burnt the iso image numerous times, using different disks, speed (from x4 - x52) and burning programs
so i have done a partition for windows on my MBP, i dowloaded latest ubuntu 10.10 desktop edition, burned the iso , restarted , boted form cd and i get htis error: Whats the problem ? when i try to download the desktop edition it says i need to use a usb stick to install it. does this means that usb stick has to always plugged in?
View 5 Replies View RelatedI am trying to put Ubuntu on my USB.
I use the tool here (as recomended by Ubuntu) to put it on my USB. It seems to work well up until it says "Data error in 'casper/filesystem.squashfs'. File is broken".
I tried to install it anyways (I know how to work the BIOS and everything) and the installation just stops with an error message.
i want to use linux but i am having some issues getting it to work on my system. my desktop is a p4 3.4gig with 512 DDR. When I insert my ubuntu CD it starts loading but then i get this screen/message:
Busybox v1.15.3(ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for list of built in commands (initramfs) mount:mounting/dev/loop0 on// filesystem.squashfs failed input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem/squashfs) on //filesystem.squashfs if I put the same disc into my HP laptop it boots up ubuntu fine. (however it won't allow me to get online, but that is a different issue).
i have a inspiron 1520 laptop which is starting to slow down some so i thought linux would help because all i do is internet use, so i download it from another computer and mount it to a usb flash drive like the site says, (netbook remix latest version) then i put it in my laptop and it loads all the way and i press try and after about 10 minutes of loading it lets me try. so that was ok really slow but i thought id install it to hard drive to see if it improved speed. so the next time i start my laptop i get Buffer i/o error on device loop0 logical block xxxxxx so i redo the usbflashdrive no errors switch usb ports and same thing, ive done the switch usb ports and redo the flash drive about 4 times im really getting mad at linux before i even have it installed.
View 1 Replies View Relatedan idea what might be wrong with fs 0x06 FAT16? I have a mobile, Sony Ericsson K750i, which was mounted in previous distributions without problems (up to 11.1). Now I use 11.2 and I am unable to mount it. I tried to do it via yast, but it says "non-existing or uknokwn file system" even it was recognized as 0x06 FAT16. I read that this fs is outdated, however still supported.
View 5 Replies View RelatedI was looking at the root filesystem folder for mounting a device when I noticed extra folders. I'm using an encrypted filesystem so I'm not sure if it's that, a break in or the default Red Hat layout. I searched these forums and Google to no avail on extra folders. The root system contains the following:
bin {fda00e13-8c62-4f63-9d19-d168115b11ca} media opt selinux usr
boot home misc proc srv var
dev lib mnt root sys
etc lost+found net sbin tmp
Trying to install 10.04.1 Kubuntu desktop to Toshiba T110 laptop running Win 7, 4 Gig Ram, 32 bit o/s. Downloaded iso from Ubuntu web site and burnt DVD. No matter what I do I get the error message "cannot mount /dev/lop0 (/cdrom/casper/filesystem. squashfs" etc. Searched by Google and this forum, tried various remedies Unebootin; USB drive boot up etc etc; still get same message. Is there a workaround for what seems to be a fairly common install problem?
View 1 Replies View RelatedThe trouble I'm having is that when I load a bootable USB/CD of 64bit 10.10, I always get an error that looks a little like: "(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/output error. Can not mount /dev/loop0 (cdrom/casperfilesystem.squashfs) on //filesystem.squashfs." I've done some googling and I've noticed people have had the same problem. They say the alternate downloads could be the problem, or the CD, and that I should use the UNetbootin application. I guess I should start with describing my build:
[code]....
I've tried:
1. Going to the DL page, DLing 64bit 10.10, and mounting the image to create a bootable CD (by the procedure offered on the DL page).
2. Using Unetbootin to create a bootable USB (this I did multiple tmes, with different versions: 10.10 64bit desktop, 10.04 64 bit desktop, and I'm about to try another DL except I forgot which one I'm using, but I'll find out in a bit )..........
I need to examine a hard drive that came from another system running Ubunut Server (not sure what version). I know the drive has LVM on it, so as far as I understand that means the drive will be treated as EXT4 for mounting. I can't boot from the actual disk, but I have used a IDE to USB connector to make a binary copy of the drive, which I've mounted as a loopback device. However, when I try to mount the loopback device properly, I get this:
root@~je:/# mount -o ro -t ext4 /dev/loop0 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried using -t ext4dev too, but that just gives an unknown filesystem error. The file I've got mounting in /dev/loop0 is a .dd file, created by imaging the drive using dcfldd on the server drive while it was mounted (as /dev/sdb). System I'm working on is running Ubuntu 9.10. All I need is to be able to mount the server drive so I can traverse the file directories, there's a few things I need to check on it. If needed I can dispense with the whole loopback setup and just directly connect the server hard drive again using the IDE to USB cable, but I'd rather not do that; it's imperative that the drive doesn't get altered, or at least as little as possible.
I am getting error while mounting loop dev over mount_dir. my step as follows:
#mkdir /mount_dir
#mount -o loop /mount_dir
mount: mounting /dev/loop0 on /mount_dir failed: Invalid argument
I'm trying to install Kubuntu on an old Windows system. I am getting tons of errors such as:
I/O error
SQUASHFS error:unable to read page, block XXXXXX
SQUASHFS error: unable to read fragment cache block
It then reports that it's loading ACPI modules and starting the ACPI services, starting the system log daemon, doing Wacom setup, starting kernel log daemon.....and then it reads sb_bread failed reading block umptysquat.I have a feeling that this hard drive is toast. I can't get it to install Windoze or Linux. I can't even get a prompt so I can do a low-level format. Unfortunately, I'm not super savvy with Linux and don't know what to do next.
I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
I am noticing the following output when running ifconfig:
[root@proxy log]# ifconfig -a
dev32758 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
BROADCAST MULTICAST MTU:1500 Metric:1
[code]....
Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
The [Errno 14] HTTP Error 404: Not Found error appeared again today, while trying to update the system. No mirrors available.
View 14 Replies View RelatedThe error message I keep getting during mounting is:-
device-mapper: remove ioctl failed: Device or resource busy
This is from ane external USB HDD I use as a backup device. I've tried formatting it as ext4 ane encrypting it from the command line
# mkfs.ext4 /dev/sdc1
# cryptestup luksFormat /dev/sdc1
which run without errors but an attempt to mount throws up the above error as well as saying - you must specify the file type (tried that) - and fails to mount. I've tried using YaST to format and encrypt it which throws up the same error when I run mount but actually does actually mount the filesystem Googling around has brought up info saying that it's probably a race condition brought on by invalid udev rules. I've got a (mostly) working system and the udev rules documentation leaves more confused than when I started.
is there a way to remove a patch from a kernel?
I need to apply a squashfs-lzma patch (squashfs 4.1cvs) to the liquorix kernel source which is already patched with squashfs 4.0.
how would I do that?I tried googling got this. url
but I dont know the command used to apply the patch the patch is called
35.4-3.patch.gz
url
but that patch includes more than squashfs,etc
I'm trying to install ubuntu 9.10, downloaded the iso from the site and burned it on a CD, but when I boot from my cdroom drive and choose install ubuntu option I get an ubuntu grey logo for a couple seconds and the I get this error:
I tried downloading a new copy and burning a new CD but still have the same error, no matter what option I choose when booting the CD.
Does anyone now whats the problem? What I'd like to do is install linux as the only OS (formating everything else) not dual boot or anything, I'm new to linux so it'd help if you guys could give me details on how to fix it
I have installed previous versions of ubuntu on this same computer but using the wizard inside windows.
let's say this system has 3 hard drives. Drive #1 and #2 are RAID 0 and Windows7 lives there. It is a hardware RAID, not software.
On Drive #3 Ubuntu has been installed using WUBI - it boots up and works okay - but it does not see the RAID array.
Do I just need a linux driver to be able to see & mount my "Windows" RAID0 array? Or is this even possible? Can anyone point me in the right direction?
CentOS 5.3 has been running fairly good except for a slow ethernet connection so I thought I would upgrade to CentOS 5.4 to see if that improved things. I had previously changed fstab and menu.lst to use UUID instead of LABEL in order to insulate myself from partition label changes I wanted to make. This worked fine in CentOS 5.3. When I attempted to upgrade from 5.3 to 5.4 using the installation disk and telling it to upgrade rather than do a new install, the installation correctly found my root partition as /dev/sdb8. When I proceeded with the upgrade I received the error:
"Error mounting device UUID=cee298a0-9c47-4a3a-ac84-23db4d20edd5 as /. No such file or directory. This most likely means the partition has not been formatted."
But of course it has been formatted and is my / partition running CentOS 5.3 as I type. how to fix this to get CentOS 5.3 upgraded ? Di I have to use LABEL in fstab and menu.lst for my partitions,or perhaps just for my root partition ? Any other ideas why this is failing ?
I posted a similar problem sometime last week...but a little has changed(mainly I can access my files now): I recently performed the auto upgrade to Ubuntu 10.04 and upon restart of my machine I am presented with 3 screens. The first is a simple "GRUB loading". The second is "mount: mounting none on /dev failed: no such device". The third screen is a series of initializations, i.e. /dev/sda1:
clean, (number of files), (number of blocks)
*setting preliminary keymap...
and so on until it hits the line:
*checking battery status
at which point it will cease loading until i press the power button. The next thing that occurs is it kills all the processes it just initialized and shuts down the computer. I read that this is likely a problem from loading the wrong kernel and I can get into my files (using a boot 9.10 boot key). The problem is I don't know what files to change in order to get my system booting the right kernel.
I tried to install last Ubuntu distribution (11.04) in a laptop that fits setup requirements. I downloaded de Iso, burnt on cd and restart the laptop with the cd inside it.The hard disk does not have any partition, it's empty, I suppose installation gives that opcion.At the begining of the installation, before any interactivity, I get this error:
View 2 Replies View Related