I am attempting to do a new install of OpenSUSE 11.2 x86-64 by burning a network install disk. I am having trouble getting it to work on my hardware however. Whenever I boot up with the disc, I get a "image checksum error." I have tried to redownload the image and also reburn it. The disc will boot in VirtualBox but will not boot on the machine. I do not understand what could be causing this because the CD drive in the machine is working just fine.
I have a problem. When I start Yast, and it tries to download the update repository, there is a checksum error. The problem is, that this error is always there, it occured about 2 weeks ago and never disappeared. When I change the update repository to a specific one, I chose a german one, there is still that checksum error. If I say yast I want to still use the repository with the error, there comes another checksum error, if i say i dont care about that one either, it says
Code: "Download failed:./repodata/primary.xml.gz could not be retrieved from http://download.opensuse.org/update/11.2/Progress:-[DownloadCommand.cc:195] caught EOF from server"
I have problem witch installing larger packages. Small packages works always. Some bigger works after few tries (like vlc-data). Large packages never works (wesnoth-1.8-music 138MB). I checked many mirrors: main, every from Poland and most from Germany. It same on kubuntu 10.10 and 11.04. My ISP doesn't use proxy of any kind. What could be the reason?
Okay, so bear with me for the lack of detail, its 3:46am and I'm really a beginner at this. So here is my issue: I decided I wanted to try Linux, so i got a Disc Image of Opensuse 11.3. while burning this disc image to a DVD-R I had no issues. But after the Validation was done an error appeared stating the disc Image was not burnt due to some error (apologies for not paying too close attention here) although the entire burn completed without issue. So I closed it and figured I would try again with another Disk when i get one.
Well as it turns out I did burn the Disc Image, and decided to try the Install. I have previously installed Ubuntu a few times and figured it was just as easy.. so I restarted my computer and booted from the CD. went through the Installation up to the Partition part.. This kind of confused me at first but I eventually got that it wanted to shrink my existing windows partition in order to make room. so i went along with it and began the install. well about halfway through the installation error messages kept showing telling me there were missing Packs. after about 10 messages I aborted the install for fear of what would happen now i have a shrunken partition and i dont know how to fix or what to do. I would still like to install opensuse but i dont have anymore DVD-R's and my Flash drive is too small. I will try to provide any info i can upon request. Oh, I forgot to mention im Running windows 7. if that helps at all which I doubt it does. I can safely access windows, nothing happened to the information on my drive. Im just missing 50GB of space now.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
I downloaded the DVD ISO version of OpenSuSe version 11.2 64bit from openSUSE. I checked the iso file checksum after downloading and it was correct. However after burning to DVD i booted from the disc and started the install. After getting passed the initial settings and it starts to extract all of the packages each file fails the checksum and will not install. I tried downloading again on a different computer and burning again using UltraISO using the Disc-At-Once method, again checking the ISO file's checksum before burning.
It still gives the same errors. So i loaded windows and started the windows based install and my anti-virus (Kaspersky) says the disc is infected with a trojan. How can the disc be infected when the ISO file's checksum is correct?. The computer that i am using to burn the disc is virus free according to Kaspersky and Norton Technician Toolkit.
I'm getting an md5 checksum error during updating. Using the update manager. I'll post a snapshot. Screenshot-Changes applied.png (38.46 KiB) Viewed 219 times
I am trying to install Unbuntu 11.04 on a Via raid 0. I have windows already setup and it boots fine, but Ubuntu does not see the raid set. Running dmraid -ay (or any valid switch with dmraid) returns :
sudo dmraid -ay -v ERROR: via: invalid checksum on /dev/sdb ERROR: via: invalid checksum on /dev/sda no raid disks
mainboard is Asus M2V, with 2x Hitachi 250Gb disks in raid 0 configuration set in BIOS. I have a 3rd hard disk on the onboard Marvell 88SE6121 sata controller but this is not seen at all by Ubuntu either. I was thinking of installing it here if Ubuntu does not work the RAID, but no go it would seem. I do remember installing an earlier version of ubuntu on this very same board using RAID 0 (2x 80Gb drives at that time) and the RAID was reconised and worked fine straight from live cd to full install.
Machine is a Dell PE 1750. Previously running 5.2 or 5.1 32 bit. Tried to install 5.3 i386 but getting this error,
Error An error occurred transferring the install image to your hard drive. You are probably out of disk space.
Click ok Install starting Starting install process. This may take several minutes. Exception Occurred Traceback (most recent call first ): File "/tmp/treedir.14202/instimage/usr/lib/anaconda/yuminstall.py", line 711, in _run self.ts.ts.scriptFd = instLog.fileno()
I am trying to install True Combat: Elite on my Fedora 14 machine, but when I try to install it, it tells me there is an error in the md5 checksum of the binary installer. Output:
[alex@sofy01 Desktop]$ sudo linux32 ./true.combat.elite_0.49-english.run Verifying archive integrity...Error in MD5 checksums: 3723510cf281bc315a9009cd1ca4f0e4 is different from 7cd28449f1231ff747e08fb76d4615c3
This file was copied from a flash drive onto my hard drive. Is there any way to skip md5 checks because I really do not want to download this 200+ MB file again.
when adding the www2.ati.com/suse/11.2 repo to yast and installing the fglrxg01 I get this errormessage: Fehler: INVALIDaket ati-fglrxG01-kmp-desktop-8.593_2.6.31.5_0.1-21.1 wurde anscheinend w�hrend des Transfers besch�digt. Wollen Sie es erneut abrufen? checksum incorrect)
Suse asks me to install it anyway but then decides to not let me install it, only leaves skip, cancel and retry. when doing skip, suse also managed to fcuk up Grub and removes all the entries for suse. Installing the driver doing like ATI Proprietary Driver Install Guide | openSuSE 11.2 vanilla - openSUSE Forums
fails miserably too. the free radeon driver on my FirePro V7750 on the Dell 6400 still has artefact all over screen, I hardly can type., this linux installing is still quite frustrating. or should I try Linux maybe in a year again?
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
I just installed jessie on a machine that had been running wheezy with no problems. Now I see that a kworker process is hogging nearly 100% of one of the CPUs. I am not sure how to proceed with solving the problem even after doing a number of Google searches.
I'm not sure if this is related, but I am getting the following when I run 'dmesg':
My hardware is: cpu: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2333 MHz Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, 2000 MHz keyboard: /dev/input/event0 AT Translated Set 2 keyboard mouse: /dev/input/mice ImExPS/2 Logitech Explorer Mouse
[Code] ....
Here is the "top" display, showing 75.2% of the CPU on kworker/1:2 and 27.6% of the CPU on kworker/1.1:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4731 root 20 0 0 0 0 R 72.5 0.0 0:53.73 kworker/1:2 28 root 20 0 0 0 0 S 27.6 0.0 0:58.69 kworker/1:1 1246 dan 20 0 1668476 132720 57548 S 2.7 4.3 0:42.33 gnome-shell 4673 dan 20 0 855208 158368 65568 S 2.7 5.2 0:28.44 iceweasel 815 root 20 0 201804 29020 18728 S 1.0 0.9 0:14.30 Xorg
So i've been battling this for a while now, trying all sorts of different options and searching the boards before I finally decided to post this.I can't make CDs or DVDs, so my only option is to mount the downloaded ISO file on my laptop with CloneCD, then set up PXE DHCP,TFTP server. This method works on other distros but this one in particular is causing me problems in the installer.
So here's the process:I copy the files vmlinuz and initrd from the ooti386loader directory to my tftp root directory.on the system I am installing, i run gPXE, at the prompt type vmlinuz initrd=initrd.I have tried a large combination of different options {install=nfs after I have been having trouble which I will get to later.
the kernel loads, the installer starts. prompts for "Please make sure CD #1 is inserted" naturally, i hit back and select NFS as the install source. It then prompts me for DHCP configuration and the NFS server IP and directory.I'm running an NFS v3 server (haneWIN NFS to be specific) and exported the mounted ISO (this case F) as /suse.
After adding rpmforge on a fresh installation of CentOS 5.4 64bit, I received the error "Metadata file does not match checksum" so decided to try the fix yum -y remove yum-fastestmirror, As discussed at [URL]... Unfortunately, this also deinstalled yum. If I try to reinstall from my CentOS 5.4 DVD, I get:
# rpm -i --aid yum-3.2.22-20.el5.centos.noarch.rpm error: Failed dependencies: yum-fastestmirror is needed by yum-3.2.22-20.el5.centos.noarch
But if I try to install the yum-fastestmirror I get
# rpm -i --aid yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm error: Failed dependencies: yum >= 3.0 is needed by yum-fastestmirror-1.1.16-13.el5.centos.noarch
Anybody else get errors about the 11.2 disk image being bad? All the linux and windows software I use say it's not in the "proper" format. I also straight burned it as a bootable disk and it still doesn't work.
I want to install a OpenSuSE 11.2 in a no optical drive station. Obviously I have done a pendrive installation (following the steps in Live USB stick - openSUSE). Using Live images it works very well. But with the net install image, when I boot the station, nothing happen and it passes directly to the second boot device
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
I'd like to do a complete backup of my laptop, convert it to ISO, and then create a bootable flash drive with it. I'd like to be able to totally restore, or run (like in Live mode) the image.
I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
I'm trying to make my USB bootable with the OpenSUSE 11.4 64 bit KDE iso image. When I open up SUSE Studio Image Writer (by following the Windows instructions here), it doesn't find the .iso image on my desktop. When I'm selecting the image, it's looking for a .raw file. Do I have to do some trickery to change the .iso image to a .raw?
Digikam will not rotate images. Worked fine in all previous versions. Tried installing 1.3 from this repo
Index of /repositories/KDE:/UpdatedApps/openSUSE_11.3 per this thread opensuse - exif and gwenview but 1.3 failed to launch. De-installed 1.3 and re-installed 1.2 from release repos.
From reading the above thread perhaps a patch will soon be released?
