I've got CentOS 5.4 without access to internet (install all from DVD).When I try ti run Eclipse via remote desktop I've got error:
Quote:(.:30196): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(.:30196): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
[code]....
I'm having some difficulty to confgure the windows X manager...
I can't find /etc/X11/xorg.conf
I'm trying to do this in opensuse 11.1 and fedora 12
I tried to install in fedora yum install system-config-display but I think that isn't the best thing to do...
And can anyone tell me a distribution that use XFree 86.4.4.x?
Opense suse, Fedora and Ubuntu use X.org-X11 isn't it?
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
How to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies View RelatedAm using Icefaces1.7.2 in tomcat5.5.23 in Centos5( jdk 1.6.06 and jre 6u11 and no X window system in my server ).. Am getting the error(java.lang.Error: Probable fatal error: No fonts found) when am using the functions getFontMetrics() and drawString() methods in my Captcha Image Generation programs. I am only using the fonts that me retrieved using ge.getAllFonts() ( i.e., the fonts available in the system ).
View 6 Replies View RelatedI am new to Samba.I'm running Fedora 10 and I've just download samba successfully and have the smb service running on my system.I'm in GNOME and select System and then Administration and Samba does not appear in the drop down menu.I have an NFS menu selection but no samba selection.I ran yum install and it installed successfully. If I can't get the samba config window is there a way I can configure in terminal window?
View 1 Replies View RelatedI have been trying to configure webalizer on a centOS 5.5 system.I did the yum install and I found this helpful link...[URL]..However when I try to change the dir it puts the info into, it keeps giving me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results.
/etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/ When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place) I go to my www page remote or on the local network I get page not found errors. http://mysite.com/webalize or 192.168.1.80/webalizer page not found.
In summary.
1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?
2. How do I display the www page to view the data?
3. How can I secure the www page so only I can view the data.
just saw this in my email too :
header info deleted...
/etc/cron.daily/00webalizer:
Error: Can't change directory to /home/webalizer
/etc/cron.daily/logrotate:
Current logging target is:
`- SYSLOG
edit: i should also mention SeLinux is in permissive mode not enforcing while i am testing this.
Recently i have installed centos 5.3 from a 'CentOS-5.3-i386-bin-DVD.iso' which was downloaded about an year ago.It was conflicting with my graphics card(Intel� Graphics Media Accelerator X4500 integrated graphics subsystem) from the very beginning as i was unable to install it in graphical mode.So i did a text based installation and selected the 'Gnome' mode.But whenever i type 'startx' or Ctrl-alt-F7 ,Linux is unable to open the x-window and show a huge error regarding its inability to detect monitor resolution or graphics card.My hardware's are Intel quad core 2.33Ghz processor,1.96 GB ram,Intel Dg41 rq motherboard and on-board graphics card(X4500).
View 1 Replies View RelatedI need to enable GFS for a shared storage file system, I need to share it to different ip's so that every one get syn data on that file system
ex : /data on 192.168.0.10
I need /data to be in GFS and need to share to 192.168.0.20 & 192.168.0.21
so that this two machines can have sync file system
/data is in shared storage
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies View RelatedI'm a new user of Linux.Recently i have installed centos 5.3 from a 'CentOS-5.3-i386-bin-DVD.iso' which was downloaded about an year ago.It was conflicting with my graphics card(Intel� Graphics Media Accelerator X4500 integrated graphics subsystem) from the very beginning as i was unable to install it in graphical mode.So i did a text based installation and selected the 'Gnome' mode.But whenever i type 'startx' or Ctrl-alt-F7 ,Linux is unable to open the x-window and show a huge error regarding its inability to detect monitor resolution or graphics card.My hardware are Intel quad core 2.33Ghz processor,1.96 GB ram,Intel Dg41 rq motherboard and on-board graphics card(X4500).What should i do to operate Linux in graphical mode?Considering that I'm a beginner and everything i have to do is in the command mode,'detailed'.
View 2 Replies View RelatedI am trying to configure a system to boot Windows XP, CentOS 4 and RHEL5. I have one hard drive that contains both Windows XP and CentOS 4, and a separate drive that contains RHEL5. Until recently, I only had one SATA cable, so I could only connect one drive at a time. Under this configuration, everything works fine. When the RHEL5 drive is connected, I can boot into it. When the Windows/CentOS drive is connected, I can dual-boot into either OS. (GRUB was configured on this drive automatically when I installed CentOS into a new partition.)
Opening the box and moving the SATA cable is a lot of trouble, so I finally got a second SATA cable and enabled both SATA0 and SATA1 in the BIOS. I currently have the Windows/Centos drive as the primary, and I can still boot into both Windows/Centos. Now, I want to add RHEL5 to menu, but I can't find the file GRUB is using to present its menu at startup.
I have configured GRUB before on other systems, but I just know the very basics, such as where the grub.conf file should be. So, I spent a whole day reading advice online and asking friends who might have experience with these issues. Here are the steps I have taken so far:
I confirmed there is no /boot/grub directory, and /etc/grub.conf is a broken soft-link to /boot/grub/grub.conf. I did a find for grub.conf, which found nothing. I did a find for menu.lst, which found one item -- an example GRUB config file in /usr/share/doc/grub-0.95. I noticed that when CentOS boots, I see the GRUB commands printed to the screen, the first of which is:
root (hd0,2)
So, I did a grep -R "(hd0" * at the / directory, which also found only one item -- the example menu.lst file in /usr/share/doc/grub-0.95. I discovered that I can go to the command line grub from the grub menu and do:
cat (hd0,2)/grub/grub.conf
The cat command returns a printout of the grub configuration the system is obviously using. I didn't create this file, but the titles are identical to what I see in the GRUB menu, the default boot is Windows, and the timeout is very short. This must be the file. It looks like:
default=2
timeout=5
splashimage=(hd0,2)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.9-89.ELsmp)
[Code].....
I've also tried making the RHEL5 drive the primary drive. In that case, I can modify the existing /boot/grub/grub.conf file and see my changes at the GRUB boot menu. However, I can't get Windows to boot in this configuration. I've done a lot of google searching on the topic and added map commands to make Windows think it is on the primary drive. But, I'm still unsuccessful on this front as well. I think I'm closer to solving the problem with Windows/CentOS as the primary. However, if you think I will have more success with RHEL5 as the primary drive, I can provide more details as to my current grub.conf on that drive in a later post.
I could not able to configure the default gateway ip address onto the system. i use the route command (" route add default gw 192.xxx.xxx.xxx eth0 ") to add a default gateway onto the routing table but it is "disappear" in the routing table when i had restart the service network.
View 3 Replies View RelatedHow do I install goldendict ?stardict I installed but when I do a word search word to the show:I still can not install the Avant Window Navigator?Which means I'm enabled the repo?
View 2 Replies View RelatedIf it possible to install and configure RHN on centos...........
I want to know how to install and configure subversion on linux box. if it new subversion version
View 1 Replies View Relatedhow can i install and configure Apache-Ant .
View 1 Replies View RelatedI'm trying to install/configure a LTSP in CentOS 5.3
I have dhcp, nfs and tftp installed, but i can't install/configure XDMCP. I was reading some manuals and "hows to" and all says that, to configure XDMCP, i have to change de atribute "Enable = true" in the file "/etc/X11/gdm/gdm.conf", but i don't have this rute, only "/etc/X11/", gdm folder doesnt' appear :S also... why i can configure XDMCP?
When i run "ltspcfg", he says:
[root@localhost ~]# ltspcfg
ltspcfg - Version 0.11
Checking Runlevel....: 5
Checking Ethernet Interfaces
[Code]....
i want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
View 1 Replies View RelatedI have centos with software firewall enable , but i want to set up hardware firewall can anybody guide how to install and configure hardware firewall in centos
View 3 Replies View RelatedI have installed the Cent OS but i don't know how to configure & install the multimedia player
View 3 Replies View RelatedMy system boots, I login and am brought to my desktop. I click on the file system icon in the launcher to open a Nautilus window. The window opens, but is unresponsive (i.e., I can't move it, clicking on the icons does nothing, etc.). If I press the super key to get the dash and the press escape, the window becomes responsive again, just like normal.
If I open a folder in the window, the window becomes halfway unresponsive in that I can't move the window, but I can select more folders and toolbar icons. The top menu no longer appears at this point, and I can't access any of the system icons on the top right of the screen. Alt-F4 closes the window even if the close button doesn't work.As another example, suppose I open a Nautilus window and then a Chromium window. Both are immediately unresponsive. If I super-esc again, I can move the Chromium window around, and it seems to work normally. I can click on the Nautilus window, but it always stays greyed out. Even if I'm clicking on things in it, the Chromium window always has focus.
I had a similar experience to this with VLC and Chromium. After clicking around enough I eventually got it to the point where VLC apparently always had focus, but I couldn't access any of VLC's controls. Double clicking anywhere on the screen fullscreened the video, and that's all I could really do. Not even escape worked to bring it back.I can usually press super to get the dash and Alt-F2 to get a command prompt. Also Alt-Shift-T seems to usually work to bring up a working Terminal (at least one that accepts commands, even if I can't move the window).Does anyone have any ideas on what might be causing this? The behavior is highly unpredictable and extremely frustrating. I should note that key commands don't always work, even though they seem to in my examples. So I don't think it's just a mouse issue.
I'm trying to host a dedicated game server for a game called garry's mod. I have to use wine *PUKE*, because the developer of the game doesn't think linux is that great, so I don't have binaries to get the server running.
I got wine installed just fine with no errors. I have vnc installed and running, and able to make connections. (nothing but a never ending black hole of darkness) This leads me to the issue. I tried to launch the installation of Steam to get the garrys mod server running, and this is the out put, and you can see my actions that I took to see if I could get things rolling, unfortunitly, I have encountered an error that I just don't know how to solve.
~:/home/revnev/gm10# wine hldsupdatetool.exe Application tried to create a window, but no driver could be loaded.Make sure that your X server is running and that $DISPLAY is set correctly.Application tried to create a window, but no driver could be loaded.Make sure that your X server is running and that $DISPLAY is set correctly.~:/home/revnev/gm10# yum groupinstall "X Window System"Loaded plugins: fastestmirror, priorities
[Code]...
Just wondering if there is an un-install for the gui. I intalled it like this:yum groupinstall "X Window System"
View 4 Replies View RelatedI want to install the Empathy on my CentOS. And I configured, then I got a resposes:
checking gnome-doc-utils >= 0.17.3... no
configure: error: gnome-doc-utils >= 0.17.3 not found
But when I run "yum install gnome-doc-utils"
The system respond:
[root@localhost ~]# yum install gnome-doc-utils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
Package gnome-doc-utils-0.8.0-2.fc6.noarch already installed and latest version
Nothing to do
I am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
How do you configure the system to automaticly change wallpaper and the standard Icon Theme to a custom made.
-If Im not mistaken, it must be something to do with the option to make a script at the end of the installation, -Ive seen the option in the creation,
Has anyone noticed this bug in KDE 4.5? It started for me with the official 4.5.1 packages in -current, and is now continuing with Alien Bob's 4.5.2 packages. I don't think it happened with previous 4.5.0 builds I was using.
1) Right-click title bar, select "Configure Window Behavior"
2) the "Desktop Effects" option is selected by default, but displays the "Window Decorations" screen instead.
3) Clicking on another option on the left will show appropriate screen.
4) Finally clicking on "Desktop Effects" will show the proper screen to configure effects.
[URL]. [In the screenshot above, you can see "Desktop Effects" pre-selected, but displaying the wrong screen.]. Bug still shows up with a brand new user account with fresh .kde. My searching for other bug reports has turned up nothing, so I'm wondering if this is unique to slackware for whatever reason. I'm running slackware64-current, up to date, with NVIDIA binary drivers.
I tried to install Win 7 from the DVD and it didn't work at first because my Ubuntu is not in NTFS which is require for Win 7 to start installing. But the Win 7 doesn't have the option to format the harddrive for me so I went back to Ubuntu to format it.
I downloaded GParted and NTFSProgs
The storage drive in the screenshot below the one I want to format but if I format that while I am running the Ubuntu OS, what will happen? Can someone guide me what to do? I can see there are two seperate virtual drives in that one 320GB SATAII harddrive. I want to erase the one with the more space because I'll install the Win 7 on it since it requires 15GB+ space. I do not want to have a dual boot by the way so I also want to make sure no Ubuntu is left out.
I upgraded 9.10 desktop to 10.04 using network (recommended) procedure.The window close button has moved (all desktop windows) from upper right corner to upper left corner. This causes untold frustration since I flip amongst numerous computers with Windows windows and other levels of UBUNTU windows. is there some way to configure where the window close button is (some way to put it back in the upper right corner)?
View 5 Replies View Related