OpenSUSE Install :: Update Suse11.0 To 11.3 On Older Laptop?
Jan 5, 2011
My laptop is a Medion MD 96970 (bought at Aldi in September 2008) with
- graphic card nVidia GeForce 9300M G
- processor Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
- 82801H (ICH8 Family) HD Audio Controller
- 3GB RAM and 300 GB memory
1) Originally, my laptop came with Windows Vista. Then I got a SUSE linux 11.0 CD, let it make a partition and installed Suse 11.0. Since Suse11.0 isn't updated any further I would like to change to Suse 11.3 (or whatever is newer). How should I proceed? (I can't find my old Windows Vista CDs and would like to KEEP THE PARTITION, thus formating all isn't an option)
2) In order to make a backup I bought a portable hard drive from iomega (USB 2.0). Then I noticed that it is formated in NTFS. SUSE 11.0 doesn't seem to like it --- what should I do? Can I reformat it somehow?
3) Suse 11.0 doesn't like my sound card. Thus I couldn't Skype or listen to music --- do you know if this problem is solved under Suse 11.3?
View 9 Replies
ADVERTISEMENT
Oct 20, 2010
I just deleted the suse kernel-default by yast2 accidentally and rebooted the suse11 box,how will I install the kernel in suse11 rescue mode from the suse11 dvd ?
View 2 Replies
View Related
May 7, 2011
I was following this thread: Upgrade kde4.6>
But just before I clicked accept after saying switch system packages to kde4 repo (the one in that thread) I noticed loads of the packages were older than those installed. In the list it has installed (available) and lots of them were all highlighted in red, and the installed version numbers were higher than the available, yet I'm running kde 4.6.0.
View 9 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download.
It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same. I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall issue.
[Code]...
View 2 Replies
View Related
Aug 10, 2011
When I run the YAST Online Update OR Software Management OR Zypper, the Updates (or install of new software) fails when the download of the Delta RPM reaches 98%. I have added ALL of the community repositories and have Imported the appropriate certificates. When watching the DeltaRPM or normal RPM download, it starts the download at approx. 4Mbs/sec until it reaches 98% of file downloaded. Then, the speed drops to 0 B/sec and the file download fails. This then prompts a Retry which again fails when it reaches approx 98% download. It does not matter if I am doing an Online Update, Doing a Software Management (to install new software) or using Zypper in a Terminal session, the result is the same.
I have even gone so far as to connect the machine DIRECTLY to the internet, bypassing all firewalls so as to ensure it is not a firewall
[Code]...
View 4 Replies
View Related
Feb 24, 2010
I am trying to install Ubuntu 9.10 on an older IBM laptop from a LiveCD. (Windows stopped working and I thought this would be a great time to try Linux!) When I boot up Ubuntu (which takes forever) it starts up, but I don't think it is recognizing the wireless card (DL 650). One suggestion I got from the net was to disable the acx module by blacklisting it with the statement:
blacklist acx
in the blacklist.conf file.
The next step is to install ndiswrapper with:
sudo apt-get install ndiswrapper-common
The last step is to get the Windows driver (I have it) and put it in a directory. Then go to that directory and type:
sudo ndiswrapper -i AIRPLUS.INF. This is all well and good, but where do I do these things to test to see if it works and ultimately, if it works, to set it up this way permanently? How do I edit blacklist.conf if this is a LiveCD and as soon as I turn off the machine everything goes away? I am not sure that I can install on the hard disk at this point because I don't want to wipe out Windows yet (it isn't my computer). I would like to prove Ubuntu (or maybe Xubuntu) before committing to it. I am also not sure that the single USB port will allow me to install a USB stick version of Ubuntu.
View 11 Replies
View Related
Jul 9, 2011
Just installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
View 3 Replies
View Related
Feb 22, 2010
I'm a new linux user and I'm trying to install some files from a .tar.gz archive. I have successfully created a repository in a directory using createrepo, but I can't figure out how to add am installation source to YaST.How is it done in 11.2?
View 2 Replies
View Related
May 13, 2010
Recently, I downloaded openSUSE 11.2 DVD.I read here (Partitioning/Install Guide) that GRUB may not dual boot correctly with windows: It should be said that grub does not always get the settings to boot Windows quite correct and you may later have to adjust the /boot/grub/menu.lst file in your Linux installation
Is it true also for the openSuse version (11.2) that I downloaded? Please refer to Windows 7.
View 2 Replies
View Related
Apr 29, 2011
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies
View Related
Feb 4, 2010
I used to keep a back level kernel on all my systems along with the latest upgraded kernel. How is that done using Yast/zypper? I don't see an option to keep the older version.
View 5 Replies
View Related
Feb 1, 2010
i want to reinstall my OS, but use kernel 2.6.31.5 instead of 2.6.31.8. Are there settings in the install that I can change to do this automatically?
View 1 Replies
View Related
Mar 31, 2010
today I upgraded my 11.2 system to KDE 4.4.2. Basically this works. However there are two questions I was not yet able to find a useful answer for:
- 4.4.2 offer strigi desktop search. The index process started and probably did its job but how can I start a search. I found a hint that dolphin can be used, but here I do not find any Menu entry that opens a search dialog (except for the standard file search window). What I found was settings->Toolbar and there I could add a search bar into dolphins toolbar. However this search bar only appears in this one window, if I close it and open a new dolphin window it will not appear again (probably a bug). Any other way to start a strigi based desktop search?
- Again in dolphin I sometimes see strange folder icons for the folders in my home directory. Basically this is the default folder icon and after waiting a while all the icons change in that inside the regular folder icon a gray rectangle is displayed a the lower left side. No idea what this is good for. I goes away if I reload the folders content and then again after a while those strange icon appears again. It does however not appear for folders in eg /tmp only for /home which is on my system a NFS mounted filesystem.
View 4 Replies
View Related
Dec 26, 2010
I add http://ftp5.gwdg.de /pub/opensuse/repositories/ always error :A valid domain name consist of
View 2 Replies
View Related
Aug 23, 2010
I am having a hard time getting repositories to install and even some applications. Do I use yast to install RPM's aned what about if the file is a zipped up tar file? If you are familiar with VMware, can we play cd's, rip them and burn and so on?
View 1 Replies
View Related
Apr 22, 2011
I have installed openSUSE-11.3 in my system.But the problem is when the load of the system is little bit higher the getting black and the performance of the system is totally decreasing and the at that time the system is also going to struck.
View 9 Replies
View Related
Dec 26, 2010
I set HTTP proxy: http://10.*.*.*:6666/ choose Use the same proxy for all protocols fill my user name and password An error occurred when testing:
* Port number too large: ****** (password number)
curl: (3) Port number too large: ****** (password number)
* About to connect() to proxy 10.*.*.* port 6666 (#0)
* Trying 10.*.*.*... % Total % Received % Xferd Average Speed Time Time Time Current
[code]....
View 2 Replies
View Related
Nov 5, 2010
I have an older compaq laptop (P4). I just wanted to be able to boot a live cd. The trouble is the only live cd I can get to boot is SUSE 9.2 and it ends up having a scripting error. It is an old disk so it is probably shot.
I have tried to get fedora 14 to boot, but it will not. A newer computer I have will boot from the FC14.
why I cannot get the live CD's to boot?
View 14 Replies
View Related
Dec 10, 2009
I am having some trouble getting a VNC session to a new OpenSuse 11.2 32bit machine I have just installed.Fresh off the DVD, tried under KDE4 and Gnome with the same result (each time a fresh install).In YAST, I enabled remote administration, open the firewall ports, and then try and connect from remote client (in this case I have tried RealVNC from windows, and krdc from a Suse 10.x client and via HTTP) all result in the same blank black screen (http does get an X cursor echoed on the screen)
View 3 Replies
View Related
Jun 19, 2011
Running:
Suse11.4 (Celadon)
Kernel Linux 2.6.37.6-0.5-desktop
Gnome 2.32.1
I've just followed the instructions at SDB:Skype - openSUSE again, as before. The install didn't start automatically when the download finished so I used package installer. Skype appears to start normally, before promptly closing itself after about 3-5 seconds. When running it from terminal, I get the message:
Inconsistency detected by ld.so: dl-open.c: 582: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed! Code: rpm -q libasound2-32bit xorg-x11-libXv-32bit xorg-x11-libs-32bit libqt4-x11-32bit libpng12-0-32bit skype
[Code]...
View 9 Replies
View Related
Feb 16, 2011
I am running suse11.3 32 bit, and have installed squid3.
As far as I can tell it's not been compiled with ipv6 support.
Or have I missed some option in some file somewhere?
View 2 Replies
View Related
Apr 3, 2010
I just installed the latest version of Ubuntu on my Toshiba Sattelite A25-207 laptop. I totally erased my previous Windows XP OS and everything else. Everything is great, execept the screen resolution. The resolution is set at 800 x 600 and I know that my screen can handle bigger. How do I change this?
I am totally new to Ubuntu and I have no idea how to play with code.
View 3 Replies
View Related
Jul 1, 2011
I recently installed Ubuntu Karmic Koala onto my old IBM Thinkpad (I THINK it's an X23 model, but don't quote me on it). The only reason I went with the older, obsolete version is, honestly, it's the only one that will run on it. That said, I love it and see no reason to go back to Lose-dows full time (I'll still get a Windows machine in order to learn the inner workings of it... thinking of going back to school for a tech job, so the knowledge will do me good).When I bring up various windows (most disturbingly, my system monitor), I get a bizarre glitch. It's hard to describe, so I'll give a screencap.
View 8 Replies
View Related
Jul 5, 2011
How to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies
View Related
Sep 9, 2010
I installed a fresh 11.2 and perform a Stable KDE update and a complete update with "Yast Online Update" and now there is no sound in my laptop.
My sound card is HDA Intel and uses snd_hda_intel driver.
View 3 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Jun 11, 2011
I don't know what to do. All my attempts to make changes with alsa-mixer failed.
View 9 Replies
View Related
Jun 7, 2010
I'm sorry if this is recurring subject, but I have searched the forum for such a subject and can't find one.I'm using Xubuntu 8.10, I'd like to update my programs to the latest releases, but the available updates in 8.10 versions are not the newest ones. I can't upgrade to a newer version of Ubuntu due to some known issues with older Intel drivers.
Is it possible to have the latest updates of packages while I still using 8.10 version?
View 9 Replies
View Related
Jul 19, 2010
i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies
View Related
Mar 17, 2010
I have a Dell Laptop C640 Latitude that locks up with in a min or two of booting up after I update from 09.04 to 09.10 or if I do a clean install of 04.10. I do not know if it is the laptop or the 09.10 that is doing it.
View 3 Replies
View Related
