OpenSUSE Install :: Add Ubuntu (10.10) To (11.3) Boot List?
Nov 23, 2010
I have three OS-es (XP, Ubuntu 10.10, OpenSuse 11.3) on my PC (single disk) and would like to add the Ubuntu to the boot list (using Suse's grub), so I can boot into it. The problem is that I have never did this before and am not much familiarized with linux, so if anyone could help me out, I would very much appreciate it.Now, from what I've read a bit on the forums and the net (specifically here), if I use the code from the link:
Code:
#Don't change this comment - YaST2 identifier: Original name: none#
title Ubuntu 9.04 booting via symlinks
[code]....
View 9 Replies
ADVERTISEMENT
Feb 6, 2011
I have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
View 2 Replies
View Related
Feb 7, 2010
I just purchased openSUSE 11.2 x64 on DVD from osdisc.com, as well as the 5 x64 repository DVD's. The base install went fine, but when I try to add thos's to my software repositories using yast they all have the same listed name, "repository" - I can change that to show "repository disk 1" etc, but when I go to install stuff and the software installer asks for "repository disk 1" I put that in the dvd drive, and it cannot recognise it, spits it out and asks for the same disk again...hmmmm. Should I not change the default name that comes up when each DVD is added to the list? If I leave them unchanged will I be told which is the correct disk to insert, remembering that in the list they all have the same name
View 8 Replies
View Related
Mar 28, 2011
im very slowly migrating across from Windows to OpenSuse. However i have a few quarms about the system and how it works.
1. Add / Remove programs.Is there a way to see a list of software that you have installed and is it quite easy to "un-install" it? I have installed Compiz and then when i went to remove it i could see 10ish items called Compiz. I was confused about how to uninstall it all from my system successfully without getting rid of something i need.
2. Software packages.I have tried to install packages from the OpenSuse site and I'm not sure what has happened to it. I have installed Virtual box from here and nothing has happened. I cannot search or even see Virtualbox anywhere. What im wanting to do is run OpenSuse as my Primary OS and then run Windows 7 on VB so i can continue to work as normal under it.
3. OpenSuse in a Microsoft domain.Is this possible? At work we use a Microsoft domain but is there a way i can install the Admin tools for OpenSuse so i can continue to work as normal by for example using Active Directory etc etc.
4. Device Manager?In Windows you have the "Device manager" a very handy tool that tells you what is on your computer, what drivers are missing and need installing etc. I can't see anything like this in Suse. Im not sure if all my hardware is installed once i am in Suse like Graphics cards, sound card, network card, card reader, and anything else that is on my PC etc.
5. Partitioning. Can someone give me a good description on how OpenSuse partitions your hard drive. I have seen it gives you a "swap?" drive etc but unsure as to what this is.
View 3 Replies
View Related
Dec 14, 2009
Sometimes my user list is empty on start-up. When it happens the buttons beneath the empty list (shutdown, suspend and restart), are not responding. As a work-around I login to the first terminal as root to restart the machine and usually my normal user account appears back on the list. This morning the reboot work-around didn't work any more..
View 4 Replies
View Related
Mar 9, 2010
I had windows 7 on my computer on drive D,then I installed opensuse 11.2 on space of drive C. But when I restarted my computer,I couldn't see windows 7 bootloader on the list, all of the options related to opensuse.
View 5 Replies
View Related
Mar 12, 2011
I am new to OPEN SUSE. I installed 11.4 without any problems. It is working fine. I did Multimedia install with oneclick option. All the updates were done. Today while going thru forums FAQ, I saw repositories list and their priorities. When I checked my repositories in YAST, there was no PACKMAN so added the PACKMAN repository. I noticed in Software Manager there is Upgrades OpenSuse-release 11.4-1.8 - 11.4-1.9! What does this mean?
View 1 Replies
View Related
Mar 22, 2011
Yast->Users and Group Administration->set filter: system users.I get a very long list, including an account called "nobody".
View 3 Replies
View Related
Apr 29, 2011
After testing Opensuse 11.4 since it was released, I decided to go back to version 11.3. After installing 11.3 I find I cannot add the community repositories, such as Nvidia, Packman, etc. It attempts to download the repository list but gives the following error message : Unable to download list of repositories or no repositories defined. I've used this DVD before and it installed perfectly. I then tried installing 11.3 from a network cd but got the same error when trying to add a repository. At this point I don't know what to do. Joe
View 3 Replies
View Related
May 7, 2011
I was following this thread: Upgrade kde4.6>
But just before I clicked accept after saying switch system packages to kde4 repo (the one in that thread) I noticed loads of the packages were older than those installed. In the list it has installed (available) and lots of them were all highlighted in red, and the installed version numbers were higher than the available, yet I'm running kde 4.6.0.
View 9 Replies
View Related
Apr 9, 2010
OpenSUSE 11.2 installation DVD has many many applications that are installed by default.How can I install just the minimum for a working system. As an excercise I am trying to build a Nas system which I can install into our Windows Active Directory at work and have user access controlled via an Active Directory user group. I have no need therefore for so many of the applications available. I have tried uninstalling some applications and have managed to remove some features that I infact needed to keep.just a minor thing like the Gnome interface (gee!). Is there a list available of core applications required to function etc. that would help me to streamline my build?
View 9 Replies
View Related
Sep 15, 2010
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies
View Related
Jan 13, 2010
Here's what i'm trying to do: i have a 300GB IDE hard drive that has a OpenSuse build. I am trying to replicate this HD so that i can have another box similar to the original one...my second drive is 500GB SATA.
So far, I just ran a 'dd' command to copy the 300GB to 500GB. Now, after having read on internet, i realized i need to change fstab & /boot/grub/menu.lst. specifically, we need to change for ex:/dev/disk/by-id/ata-Maxtor_7L300S0_L60LCJ0G-part1 to /dev/disk/by-id/sda1 i did use a Ubuntu LiveCD to access the fstab and changed the line as mentioned above. Now, how do i change the menu.lst?? right now, when i try booting up from this HD, i have issues. specifically, i get this error message: could not find /dev/VolGroup00/LogVol00
View 6 Replies
View Related
Jun 20, 2010
I've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies
View Related
Jun 8, 2011
On Ubuntu, the local user is automatically added the xhost list when logging in (via a script in /etc/X11/Xsession.d).
Is there a way to enable this in OpenSUSE?
(My original problem is that I cannot interact with a running X session when loggin in via SSH, since newer GDM versions don't create $HOME/.Xauthority any longer.)
View 9 Replies
View Related
Nov 30, 2010
I'd like to change the font characteristics (size, colour) on initial login screen (list of users) however I cannot find the configuration options.
View 6 Replies
View Related
Nov 1, 2010
Alright so I'm currently in the process of trying to transfer a wubi install of ubuntu to an actual partition using LVPM. I need to use unetbootin with parted magic mounted (not sure if that's the right term) to my hard disk rather than a bootable flash drive. So I set everything up, downloaded parted magic ISO, ran unetbootin and selected the file everything installed smoothly. I then restart my computer and unetbootin is indeed in the boot list but when I select it, it remains at a black screen. I left it at the black screen for about ten minutes and nothing happened. I've tried a few times and nothing.
View 2 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Jan 4, 2010
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
View 4 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
Sep 29, 2010
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
View 6 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Jun 24, 2010
I'm new to OpenSuse and also fairly new to Linux in general. I installed OpenSuse 11.2 on a secondary machine and I really like it. However, during booting it stops somewhere half way, giving me only a black page but with a functioning cursor arrow. I can't do anything with it though. I re-booted in recovery mood and managed to boot up as root using the command 'startx'. How can I get back to "my own" log-in from here, with my own settings etc? There's obviously something missing during boot-up but where do I look?
View 5 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Apr 27, 2010
I have a Samba server running in my Lan (mainly for file and print service). This server will act as a PDC (don't ask why...). I have a question: Under a share I can use the "read list" and "write list" options with groups (eg @users). Is that group a Linux or Samba group? If it's the later, am I forced to use the net groupmap command, or it is sufficient to have a group name in the /etc/group file? Should I add samba/linux users to that group (with net rpc) or is sufficient to have the group membership set in the linux?
View 4 Replies
View Related
Aug 17, 2010
I just today installed OpenSUSE 11.0 on an empty drive I had (320GB) and I had Ubuntu 10.04 on another 500 GB drive, and I have now lost my GRUB menu.
Below is the output from FDISK. how to modify bootloader?
I'd prefer to boot from the OpenSUSE side and just have Ubuntu as an option.
Ubuntu (which is on sda drive) along with OpenSUSE 11.0 (which is on sdb drive):
View 5 Replies
View Related
