OpenSUSE Install :: HD Updated - No Keyboard / Mouse After Boot
Jun 3, 2010
I had a normal OpenSuse 11.1 setup, along with Windows XP, swap partition and /home partition. After my hd began failing (badblocks), I cloned the system to a different location (using ddrescue), updated the hd with a new one (bigger), made new partitions on the new hd (preserving the old locations, ex: /dev/sda1 ext3 on old hd still is /dev/sda1 on new one, but made changes to the partitions sizes to make them bigger), recovered all the clones to the new hd, fsck'ed them, recovered grub with install dvd then tried to boot.
On the first boot, it failed to mount / (/dev/sda1) and gave me a command line. I checked /etc/fstab and saw that, on the old setup, it was mounting the partitions based on the HD-id, which obviously changed. I fixed that to use /dev/sda1, /dev/sda2, etc. Now, the systems boots fine. But, when I get to the graphical login part, the keyboard and the mouse don't work. It's a Dell Inspiron 1525 notebook, now with a 320gb samsung hd.
I was working on something important in 11.2 and did a "zypper up" in the terminal in the background. I wasn't paying that much attention to it, I believe it was an update to 11.3. After returning to the computer after about one hour the windows were behaving strangely and the machine wasn't very responsive. I decided to reboot. Now at login I have neither mouse nor keyboard. I have switched the keyboard to PS2 model, no difference. If someone could help me with booting to run level 3 from the grub menu perhaps I could change some settings there to make everything work. I really regret doing the update. It would be very important for me to be able to get back in to machine with spending as little time as possible on this. Could I reverse the update? This machine is very important for me and my family for their daily communication, but currently I have very little time to fix this. My quick fix was to install Kubuntu 10.10 so I could resume working, but I would really need to get back in to 11.2.
I have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
I just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
Today I installed openSUSE 11.3. I finished downloading updates, and restarted. I can get through the grub menu fine, but after that my keyboard and mouse fail to respond. On my windows partition(which is where I'm writing this) my keyboard and mouse work fine. If it matters, they are the Logitech Wireless EX100 keyboard and mouse set.
I recently installed suse 11.2 on my system and during the install the keyboard (Microsoft internet keyboard PS/2) and mouse (Microsoft optical mouse USB with scroll wheel) worked perfectly, but once I reached the login screen they both became unusable.
I also tried rebooting into failsafe mode but once reaching the login screen the same happened again, the only key that seems to work is the 'F Lock' key and the optical light appears on the mouse.
I just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
Was running out of room on / and set in Yast to delete /tmp on startup. Also deleted /var/log and /var/tmp while logged in. Rebooted and now mouse and keyboard (both USB) not working. Keyboard works on grub menu. Also works now in XP. Tried reconnecting (sync & plug unplug) different usb ports and nothing. Gave it a few minutes on startup and still nothing. Plugged in a PS2 keyboard and the lights just blink after startup and it will not work either.
I know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
I have installed VMWare server 2 on a windows XP host. Then I installed Suse 11.2 on the VMWare server. For the most part everything seems to be working Ok. However, the key board will type two letters with every keystroke. I have used the the accessibility options to force a hack fix (slow keys). Also, the host pointer looses synchronization with the guest. Simple fix, running it off the screen forces VM to synchronize.
I have managed to find work around solutions, but overall it is annoying and effects my productivity (IE Ctrl+C takes about 2 seconds to register!!!). I would like to find better solutions. So I am looking for advice on how I could address these issues, I need advice on two methods:
1) Assuming the problems are within Linux, I will need to tweak/change the drivers for my mouse and keyboard, how would I do that?
2) Assuming the problem is with VMWare Tools, I will need to tweak/update the tools. Now, I have noticed that Suse has their own custom setup for the tools. Thus the documentation for tweaking the tools doesn't apply (ie cannot find vmware-tools-config.pl). So how would I go about playing with that side of things?
3) Ruled out the problem being with VMWare itself. Whenever I run the system in command line mode, or in the graphical installer, the keyboard works fine. It is only within KDE that the problems arise. Thus it is either X-Windows/KDE or the VMWare tools layer that is causing the problem. So my next question, is there a way of turning components off and on to narrow in on what component is causing the problem?
similar issue to Keyboard and mouse deactivated while installing - openSUSE ForumsI am installing from OpenSuse Linux 11.2 DVD. After I hit install, the screen with keyboard layout choice comes up, but neither my mouse nor my keyboard work on that screen (they did work until that screen)I have Vista and Win7 installed on separate partitions. My keyboard is a logitech S520 and mouse LX5, both wireless, connected to a USB portI did try to connect a wired keyboard and mouse over USB (front ports), did not work.
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
A couple of weeks ago I installed a new 4-core Lenovo PC and installed Squeeze on it - keeping it updated every day. When kdm or gnome display the login screen, my USB-connected keyboard and mouse don't react. When I then unplug and re-attach them into the same socket everything ist fine. Surely this can't be working as intended? I can however get into BIOS-Setup as usual during the initial boot-phase by pressing Crtl-S and F1. Things also are fine when selecting the debian version to run from the multi-boot screen.
I am enclosing the kern.log of the last boot below (don't know how to attach files!). In that I can see that on line 530 ist says New USB device found, idVendor=046d, idProduct=c03e (address: 5; optical Logitech mouse) and then on line 542 New USB device found, idVendor=046d, idProduct=c31c (address: 6; keyboard). It seems to get "interesting again on line 632 etc. with the message usb 2-1.8: USB disconnect, address 6.
------------------------------------- 2.754607] usb 2-1.5: new full speed USB device using ehci_hcd and address 4 2.855589] usb 2-1.5: New USB device found, idVendor=046d, idProduct=0a0c 2.855594] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2.855598] usb 2-1.5: Product: Logitech USB Headset
I have been battling this issues for about a year now. Kind of got tired of dealing with it, but inevitably I go away for vacation or something and I lose power at the fort then the system will not come back up on its own.
Every time (100%) I power my system on with the single USB cable connected to it, my system hangs. It did it on 8.x, 9.x and all versions of 10.x. I have asked the questions before, but never get anywhere with it. Finally I have found this Forum and figured out how to ask questions Weird, I know Anyway.
The system goes through the BIOS check and gets to the GRUB loader. If I do nothing, it hangs with a black screen just after it says that it is loading the kernel.
If I change the kernel commands to include the noacpi=apic or most other common fixes for what I have been told, USB, I get to the same place seemingly.
In reading through the forums and a little testing, I find that if I remove the splash and the quiet commands (obviously snicker), I am able to see where it is really stopping, but does not make sense to me.
The last informational text that appears to be processed is one of
Registered Protocol Family 1
There is nothing in the SYSLOG, MESSAGES or DMESG at all for this boot. I would assume that the system is not to a point where we can log this data
This is an AMD Phenom II x4 running 10.04 64bit Ubuntu. The USB connected device is an Avocent KVM 4 port with Audio and USB.
I use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[ 17.206] (II) Module shadow: vendor="X.Org Foundation" [ 17.206] compiled for 1.12.4, module version = 1.1.0 [ 17.206] ABI class: X.Org ANSI C Emulation, version 0.4 [ 17.206] (==) Depth 24 pixmap format is 32 bpp [ 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 17.211] (==) FBDEV(0): Backing store disabled [ 17.212] (==) FBDEV(0): DPMS enabled
I have a Microsoft Wireless keyboard / mouse which I use for my Windows world. I have tried booting the OpenSuSE 10.2, 11 DVDs, but none of them recognize the wireless keyboard that I have connected and I am unable to proceed with the installation because, the default selection in OpenSuSE's first installation screen is *Boot from HardDisk* I also tried using the Ubuntu Live CD that I had, the same problem of keyboard not recognized, but the lucky part was, the first screen in the live CD was a language selection and the default language was English and timed out and moved onto booting the Live CD. Once the booting was over, the wireless keyboard and mouse worked like a charm!
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
Running Landmarq Intel Atom DC330 Desktop I have just attempted to upgrade my desktop machine from Kubuntu 10.04 to Kubuntu 10.10. I used KpackageKit to do the upgrade which proceeded smoothly until the install packages phase, which seemed to complete and then repeat. I don't know the detail of what happened as I was out of the room.
The repeat almost completed, but then I got a set of error messages, which basically told me that KpackageKit was unable to install the upgraded packages. I closed KpackageKit, and closed the machine and tried a reboot. This time, I got as far as the splash screen, but although the cursor flashes, I can't type anything in the password box. In addition, the mouse pointer won't move. Using a different wireless mouse works, but I still can't type in a password.
However, the command ctrl+alt+sysrq+RSEIUB works, so the machine is accepting some keyboard input. I also know from using a live disc that my home directory is intact. I would like to revert to my 10.04 installation, and re-try an upgrade to 10.11 afterwards.
I have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..
I'm running suse 11.4 64bit and flash 11.0.1.60 My problem is that when I'm running flash if I give some keyboard input then my mouse (and only my mouse from what I can tell) will freeze for a second or so. This is most annoying when I'm goofing off playing a flash game that requires both keyboard and mouse inputs, since if I use the keyboard for anything I can't use the mouse for a second or so.I've tried searching the forums but I can't seem to find anything on this topic.
I have a recently installed version of opensuse 11.4 and I am unable to use the keyboard and the mouse at the same time. Whenever I type on the keyboard my mouse will become frozen for about 2 seconds and then will work as normal. It will happen with any key press. This problem became very apparent when trying to play first person shooters. I cannot move with the keyboard and look around with the mouse at the same time
I'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
I just upgraded (via backup and install) from 11.1 to 11.2. SaX2 was perfect for configuring my IBM SpaceSaver (Trackpoint) USB keyboard, and my Logitech Marble Mouse. Now that SaX2 doesn't have the keyboard or mouse, eh... modules?, I don't know how I can configure them the way I'd like.
What now? I'd rather not have to use the on-screen keyboard every time I start up openSUSE to turn off NumLock... Do I have to manually edit /etc/xorg.conf now?
I have a wireless keyboard with touchpad However the position of the mouse buttons is very unconfortable and so I would like to remap the mouse button to some kes on the keyboard.
I would like to use the media keys which are present on the keyboard. They are useless to me since most of the programs that I use have their own keyboard shortcuts for controls such as play, stop etc.
I mapped the keys using xev, and for instance I found that the "play" key mapped to keycode 172
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
