General :: KDE - Control Center And Configure Desktop Missing
Apr 6, 2011
Yesterday, after I first installed Slackware 13.1 I had no trouble replacing the default wallpaper with a simple gradient. Very easy. Today, (after re-formatting the drive and re-installing the entire system because I messed around with a script and it wouldn't boot) I can't change it. I spent about an hour messing around with menus and settings trying to figure out how I did it, and eventually, as a last resort, turned to the help file. It tells me to choose Configure Desktop from pop-up menu when right-click on the background.
But Configure Desktop doesn't appear in the pop-up menu. (At least, not anymore it doesn't.) The help file also says to use the Control Center, but I can't find any trace of that either. I haven't the slightest idea why these are missing. Since I re-installed everything onto a freshly re-formatted drive, anything I played around with before shouldn't have any effect on the new installation. The problem is there both when I login as root and user. I really don't want to try re-installing everything again.
The only changes I've made to the system since the re-install is to edit /etc/inittab to replace the 3 in id:3:initdefault: with a 4, so I get a graphical login, and to edit /etc/rc.d/rc.inet1 to place an & at the end of the dhcpcd request which, according to the instructions I was following should put it in the background to speed up boot-time slightly. I haven't (knowingly) played around with anything that should affect KDE, except changing settings from within the KDE menus. I know it's probably going to be something very simple, and possibly obvious in retrospect, but I'm new to Linux and have no idea what I'm doing here.
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
I have recently had my ubuntu 10.04 updated and lost the show desktop (minimise button usually attached to the desktop panel located at the bottom far left corner of the screen. (The one you click on which minimises all windows and takes you direct to the desktop.
I have tried looking for options in the Appearance and Windows options in Menu-system-preferences but cant find anything, that could be used to enable or disable this feature. Secondly, since upgrading to the current version of Ubuntu I have been missing the volume control button usually located by the date/wireless/ Power off button/ icons on the panel located top right of screen.
I have a pretty powerful computer and GPU that I'd like to fully utilize.I've been using Linux for the better part of 10 years and I'd like to know (as I can't think of a way) how I can use a single PC as a desktop AND a media center.My vision would be to essentially have to separate workstations on one PC. My desk monitor will be station one (desktop) and my TV will be station two (media center)... both should work independently of each other as if neither knows the other exists.
I installed OpenSuse 11.4 Gnome on my Toshiba laptop. A couple of things i noticed while trying the live CD first is that the file manager recognized my NTFS partitions and after I installed I expected it to do the same. Also, while installing I thought I selected a secure logon with username & password. After installation it boots right into the desktop GUI. I haven't had a lot of time playing with OpenSuse yet and I have browsed through some threads and I couldn't find a way to configure a secure logon and do I have to mount the Windows partitions in the Command Line or is there a tool I can use in the control center?
I tried adding sample programs to the Control Center by adding them to the Preferences/Administration menu, but that doesn't work. I'm using Lucid Lynx.
I know that you can have a nice control center if you have nvidia or ati drivers installed. Is there such a thing for intel graphics (Intel GMA or HD graphics)?
Today is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
when running XFCE, changing the font in qtconfig fails to change fonts in KDE apps such as ktorrent and koffice. This is rather annoying because default KDE fonts are excessively large and blurry on my monitor. Is there any way to force KDE apps to obey qtconfig settings?
I'm about at wit's end trying to figure out how to get Fedora 10 (can't go upgrade past that version, due to no more support for the integrated Radeon S300 graphics) on my HP Media Center desktop to resume after suspend- or to disable suspend, or anything that will prevent the computer from hanging after a period of inactivity. I have tried various combinations of noapm, noacpi, s4_nohwsig, etc., etc.; nothing helped. Actually, noacpi might have helped, I don't know, because disabling ACPI somehow disables internet as well, and I'm not willing to pay that price.I went into the CMOS RAM setup (both before and after updating the BIOS to the latest version), and the only Power options available were "After AC Power Failure," "WOL in S4," and "XD (Execute Disable)."Does anyone perchance know the magical solution to make the problem go away, aside from reverting to Windows?
P.S. The specs: Dual-Boot XP / Fedora10 with GRUB bootloader PentiumD 820(S) DC 2.8 GHz (800 MHz FSB, Socket 775)
About a week ago, I installed all the updates that popped up. I didn't actually look at what was being installed.
Since then, most of the items in the Yast2 Control centre won't run and just pop up an error box with the following (Firewall):
terminate called after throwing an instance of 'std::logic_error' what(): basic_string::_S_construct NULL not valid YaST got signal 6 at YCP file /usr/share/YaST2/clients/firewall.ycp:20 /sbin/yast2: line 440: 19436 Aborted $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS Xlib: extension "RANDR" missing on display "::ffff:127.0.0.1:11.0".
This is the error message I got today when updating. patch:yast2-control-center-4200.noarch conflicts with yast2-control-center-qt.i586 < 2.20.2-1.3.1 provided by yast2-control-center-qt-2.19.3-6.1.i586
I've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
Catalyst Control Center (CCC) is not saving the changes I make. I saw a couple of thread about this that had links to instructions on how to install CCC, but it still doesn't work for me.
I start CCC with 'sudo amdcccle' and the GUI appears. I can use it to make changes; however, it never saves them. After clicking OK, it instructs me to restart the system. After a reboot all the setting are back to the default.
I have installed CCC three different ways:
1) sudo aptitude install --without-recommends fglrx-amdcccle | tee fglrx-amdcccle.log
In all cases, the fglrx driver works, and 'sudo amdcccle' brings up the GUI, but the changes are gone after a reboot.
Hmm, at the moment, when I click "Apply" and the "Do you want to keep these settings?" 15 second countdown box appears, no changes occur even temporarily.
I've tried doing a fresh install of 9.04, then upgraded to 9.10 (I have problems with the 9.10 command line installer not installing grub) among other things.
I am currently using Xubuntu version 11.04 and I am working with a Radeon HD 4850 graphics card. I am using the proprietary FGLRX drivers from AMD.
I have a small problem. I have two monitors, and in order to tell the computer to use the extra monitor for extra desk space, I have to get into the Administrative CCC. However, when I click on the administrative CCC, nothing happens. It's strange considering that the regular CCC works just fine.
I have a personal laptop and a work laptop. personal is running ubuntu 10.4(which im planning upgrade to 10.10 soon) and Win-Xp on work laptop. I would like to run ubuntu on work machine, but i need to use vmware vsphere client regularly as half my work is related to it.
Is there an alternative available for vmware vsphere client? How can i have ubuntu on work laptop and have access to VMs via the control center? Is running Windows-XP on ubuntu via vitual box a resolution? If yes, I have 3GB of RAM on my work laptop, is that enough?
I finally upgraded from my old Passive Nvidia 6600GT video card to a passive ATI 5750. Using Fedora Core 12, 2.6.32.16-141.fc12.i686, On boot the native driver worked but the card got hot as it was not de-clocking into idle mode like it does under windows 7.
So I reluctantly installed the closed source ATI driver from RPM Fusion
I also added nomodeset to the kernel start-up
Previously I was using the native standard built in Nvidia driver.
The new ATI driver seems to be running with correct entry in Xorg.conf and now it runs very cool at idle just like under windows :-
However the control center will not start...There was a problem initializing Catalyst Control Center Linux edition.
Also some commands using aticonfig return this error...
These libs are on the system in /usr/lib/catalyst
I am also getting video tearing in movies with mplayer and VLC. I have tried the options...
Which added a vsync entry in xorg.conf, but No luck...I think I need to get catalyst control center (amdcccle) running which I has a sync on refresh option radio box that may solve my video issue.
I can live with these errors but the video / movie tearing is a show stopper.
I am getting headache over this trying to find a solution to these issues. ATI and Linux still do not mix well
Today I updated using yum there was a update to something called control- center (2 updates for this) It said it was for changing fonts backgrounds, themes etc... is this just a update for systems settings or tweak tool or a new program? I know I cant change themes in System Settings so what is this...Anyone download this today? I cant find a new application.
I'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
I'd like to combine the gnome-main-menu and control center windows into one window.by default the gnome-main-menu closes by after you choose an application, the control center does not.I use docky and if I could combine the two windows I'd have one less icon on the dock.I'm also open to alternative menus. preferably that work with docky. gnomenu isn't my fav but I haven't tried many others.[URL]
I've got 10.10 up and running like a champ. Haven't done much in it, but all was well. After a little while I went in to turn the cool effects on, and it told me I needed a driver for my ATI card so I said go for it. It ended up putting Catalyst Control Center in for me. That's all fine and dandy except on the windows side I can get into an area that allows me to adjust overscan and turn it off (its a slider for under and overscan).
This version wont seem to let me do that, so now I'm stuck with either NOT a full screen, or no ability to have fun graphic effects. While your here, how can I change the data files which I think ubuntu refers to as your /home folder (documents pictures etc) to a different location? Windows7 and Ubuntu need to see the files in the same places so I don't have to have two working sets of files.
I was just wondering if there are any applications that would serve as a webcam manager in Ubuntu. I am running 64 bit Ubuntu 10.10 on a Dell XPS M1530. Under Windows, I was able to modify camera settings (resolution, image, special effects) from a dedicated panel any time the camera was on. I don't need a lot of flashy features, but it would be nice if I could lower the resolution so that Skype runs more smoothly.
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs: CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+ Motherboard Name Unknown Motherboard Chipset SiS 761, AMD Hammer System Memory 1024 MB (PC3200 DDR SDRAM) BIOS Type AMI (11/09/07) Display Video Adapter ATI Radeon HD 4300/4500 Series (512 MB) Multimedia Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
spent endless time trying to get multiple monitors going and have had a bit of success -- got two showing just fine. However, when I try to access the page I mention in the title, Slackware hangs hard -- only the red button will get me out. This is recent. I had dual monitors going before and that didn't happen, I think one monitor was at 800x600 and the other at some wide screeen rez. Anyway all by itself the 800x600 decided to go to 1024x768. Now, note that it all shows fine, no issues of any kind on the monitors themselves, xrandr works
