OpenSUSE Install :: Custom SuSE Distro And Yast/control.xml?
Dec 8, 2009
As a Fan of openSuSE on the Desktop i'm about to create the version 2.0 of our local LUGS munotLinux distribution which should be localized for switzerland and contain a lot of additional software.
For this case I tried to modify the control.xml file in the root image for yast to hide the dialogs for language/keyboard layout, location and deskop choice (it will be a kde based distro). I can set the language, keyboard and location defaults correctly, but I couldn't get any success in disabling the regarding dialogs yet. And after all googeling and reading the available documentation I can't find a hint about the correct way to modify the control.xml this way.
View 2 Replies
ADVERTISEMENT
Nov 18, 2010
I'm having trouble with Yast, I noticed today that I can't open the control centre from the desktop (along with install/remove software) when opening from the command line I get. the following output:
** (y2controlcenter-gnome:9050): WARNING **: error accessing /desktop/gnome/lockdown/disable_command_line [Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)]
Yast2 control centre opens, but none of the options load when selected. I have tried updating everything through Zypper which didn't work. (aka zypper ref/up etc). Then I tried removing yast and installing it again. When I did this (and downloaded the Yast control centre again the above errors, reappeared.
View 3 Replies
View Related
May 16, 2011
After installation and deinstallation of XEN the main topic "Virtualization" is missing in the YAST control center.
Under "Software Management" I searched for "yast" but found no fitting module.
How can I reinstall?
View 2 Replies
View Related
Jun 14, 2011
I hope this is the right forum in which to post this but I am currently running SUSE 11.2(I know im a couple versions back, its a long story but this box has been in storage for awhile) but the problem I am having is with updating SUSE and accessing the repositories through the Yast Software Installer. When I open it I get several variations of this message:
Download failed:
File '/repodata/repomd.xml' not found on medium '[URL].. I think this must have something to do with an old repository not being up but im not exactly sure how to fix this.
View 7 Replies
View Related
Apr 23, 2011
While upgrading from Suse 11.3 to 11.4 using zypper my computer froze. I allowed it to sit for 7 hrs before regrettably restarting the machine. I was later able to install 11.4 successfully, however it seems now yast2 is broken.
Whenever I try to use the sofware management tool the following error appears:
Code:
Interesting enough zypper gives the following following text when I use the ls command
Code:
I thought the two files were not linked so I performed a #ln, but that yeilded this error.
Code:
ln: failed to create symbolic link `libzypp.so.706': File exists
I think the two issues are related, but I'm pretty stuck at this point. I've read about people having similar issues with yast2 after distro updates, but their issues seems slightly different as those solution do not work for me.
Suse 11.4 Gnome 2.3.1
Dell Inspiron, Intel Dual core Centrino 64, 4 gigs of ram
View 9 Replies
View Related
Mar 19, 2011
why is there two different buttons to do the same job? i made the default sound device creative x-fi with the kmix in the right hand corner but i still couldnt hear any sound. i then found out from another forum thread in this forum that to change the default sound device you have to go through yast. it works now but it is confusing. same for networking. network manager is installed by default in 11.4 but if you click on the icon in kde tray it says no network interfaces found. you then have to go to yast,network and click the radio box for network manager then click on ok. i hope in future releases of opensuse there will be one way to change the defaults.
View 2 Replies
View Related
Sep 22, 2010
I have a question that I can't find anything about online. I have spent the last few months creating and customizing a Kubuntu OS for my company and we want to install it on roughly 45 computers (all different models). Is there a way to save my creation to a cd so it can be installed on another computer?
I know about creating an image of the HDD but what I want to do is create what you would get in the store from Microsoft. A complete OS on a CD, ready to install with all of my configuration changes already setup.
View 1 Replies
View Related
Dec 2, 2010
If you can access Suse Studio here is thlink to the buildLFS Host - SUSE GalleryGoogle hasn't been friendly and neither has a search on these forums, I don't know which man to read so a finger in the right dirrection (preferably not the middle) would be nice as far as that goesRight now the yast live installer trips up at %84 while saving the boot loader configuration and displays a popup that says �An error occurred during initrd creation. /sbin/mkinitrd: illegal optionI then press enter to acknowledge the message and the installation continues without a hitch.
When I go to boot up (no other os installed) grub says it cant find the file initrd-2.6.34.7-0.5-defaultIf you boot the live cd again you can mount the boot partition and you�ll find a broken symlink called initrd that islooking for the missing file above.Like I said above, if it an obvious fix, all I need is some direction, I don't mind reading. (been doing that all day)If you need more specifics Id be happy to supply, I'm just not sure whats relevant and don't want to bloat the post.
View 1 Replies
View Related
Dec 20, 2010
Is it possible to install p7zip in a 10.2 32-bit distro .... I have a problem upgrading to higher versions at the moment.
View 1 Replies
View Related
May 22, 2011
I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies
View Related
Feb 20, 2011
I would like to take say, CentOS5, customize it to my needs, then make an installer ISO for it.Basically I'd like it to be a next next next install, and it has everything already in it like sshfs, basic config files, and other custom stuff preconfigured. I tend to do all these things manually every time I install, and I'd like to just automate it all, and also not have to depend on an internet connection each time. How would How would I go about doing that? I don't want to just take a disk image, since then I'm restricted to that platform. I still want it to be a true installer.
View 5 Replies
View Related
Mar 17, 2010
I am using Suse EL 10.2 on IBM cloud, and need to install basic packages such as gcc, zlib, etc. Is there any official Suse 10 sources that I can use?
View 1 Replies
View Related
Sep 6, 2009
Ubuntu has GRUB and I accessed Suse's partition while in Ubuntu to copy Suse's new kernel id from the menu.lst and paste it into Ubuntu's menu.lst. I boot into Suse OK but, don't have any rights. "su -" gives me "su: cannot set groups: Operation not permitted". I can't open Yast either.
View 6 Replies
View Related
Feb 24, 2010
From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
View 5 Replies
View Related
Dec 12, 2010
I can get the installation history via the command line:
Code:
rpm -qa --last | less
Is it not possible to get it from YaST in the same way as you can in Synaptic? It would not only be nice to see a basic list, but also what has been pulled in as dependencies and have it grouped by 'installation sets'. Too much to ask?
View 4 Replies
View Related
Jul 23, 2011
I don't know why this is happening, however, all of a sudden I am unable to install any packages (from OpenSUSE repos of course) using either Zypper from the CLI or YaST2. Every time I try and install anything, or perfom a zypper dup, I am greeted with the below error message.
Code:
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
I'm no stranger to OpenSUSE's package manager, however I have yet to come across this error before.
View 2 Replies
View Related
Mar 16, 2010
when in command line (because i cannot start plasma either) i get an error message stating [/usr/lib/YaST2/bin/y2base: symbol lookup error: /usr/lib64/libstdc++.so.6:undefined symbol: _ZNst_num_getIcSt19istreambuf_iteratorIcSt11char_traitsIcEEE2idE, version GLIBCXX_3.4] i would like to know how bad it is and if it can possibly can be fixed
View 9 Replies
View Related
Jun 8, 2010
Anyone know what happened to the nvidia repos and are they going to come back up?
Can't access it through yast, ftp, or a web browser.
View 2 Replies
View Related
Jul 20, 2011
The updates used to happen automatically in 11.4 but the last few weeks no updates at all even if I do it manually in yast still no updates is this normal?
View 9 Replies
View Related
Jan 10, 2011
I created a custom linux distro that originated from ubuntu server and I installed time-admin and want to change the time without admin rights. Is this possible?
View 1 Replies
View Related
Apr 19, 2011
scanning them with Avast! and Malwarebytes Anti-Malware or by running registry cleaners like Ccleaner.However, I think it would be cool to have a Live system that I could boot from my flashdrive that I could have programs installed to do all this with.It would be cool if I could use Puppy Linux, since it loads and runs from RAM, which gives a huge speed boost when compared to running a live version of a distro like Ubuntu, but I don't really know my way around Puppy, or how to make my own "pupplet". Also, from what I could tell, Puppy Linux didn't have a package manager like Pacman or Aptitude.Here's a list of programs I would like to have a Linux alternative to use:-Avast! Anti-virus-Ccleaner (registry cleaner)-Malwarebytes Anti-Malware/Superantispyware (malware/spyware cleaner)-Perhaps also a Defrag program like Defraggle
View 1 Replies
View Related
Mar 17, 2011
I get the following error when YAST tries to install the latest updates----Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index----could it be from removing KWALLET? Now I cannot re-install it due to this error.
View 9 Replies
View Related
Jan 29, 2010
If you go to Vuze: The most powerful bittorrent client in the world. you'll see that you can download a tarball for linux. But, if you're like me, you'd rather get the RPG so you can use YaST to install it, allowing you to add vuze to your application launcher and desktop. After digging through google for the rare RPG files for the latest version of vuze.
Step 1: Download the swt libraries RPM here: ftp://ftp.pbone.net/mirror/packman.i...m.6.1.i586.rpm - ( original link found on this page )
Step 2: Download the Vuze RPM here: ftp://ftp.pbone.net/mirror/packman.i...1.1.noarch.rpm (original link found on this page)
The Vuze package needs the swt libraries pre-installed, so download that one first. In just two clicks, you'll have the latest version of Vuze installed by YaST on your system! BTW, this is my first post and first thread in these forums. I just installed SUSE on Tuesday and it's my first Linux OS I've tried.
View 3 Replies
View Related
Nov 18, 2010
Is it possible to configure Yast Software Manager module so that it does not completely exit when done installing a package? It get's annoying to search for a package and install it, the software manager exits, you then have to reopen it, install another etc. a few minutes later.
Seems this would be a config option, but if so I can't seem to find it.
View 5 Replies
View Related
Nov 20, 2010
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
View 1 Replies
View Related
Nov 28, 2010
I have a problem when trying to update or install new application via Yast, I'm using opensuse 11.3. PackageKit Error repo-not-available: Failed to download /content from Index of /distribution/11.3/repo/oss
View 9 Replies
View Related
Feb 6, 2011
I have old laptop that I intend to give away to a child who's family, due to bad financial, has no means to afford it.
I'll quote Ken Starks: "A Child's Exposure to Technology Should Never Be Predicated On The Ability To Afford It"
I have installed openSUSE 11.2 with KDE (as this one works perfectly on that laptop), but I wish to put it in one of the languages (ordered by preference)
1. Serbian
2. Croatian
3. Bosnian
During and post installation there were neither of those languages available.
View 2 Replies
View Related
Apr 25, 2011
As I have had some problems using kpagager I've used file asociations to set yast as the default. When I download an rpm the yast icon bounces around for a while and then dies. I assume this means I need another set of yast launch instructions. Suppose I could download to a directory and set it as a repo but would rather just have it launch for rpms as it's quicker. 11.4 KDE 4.6.0
View 9 Replies
View Related
Nov 13, 2009
i had the problem that i couldn't surf access the internet while DNS and PING worked well. That i solved with ipv6.disable=1 at boot time. Now i can suf the internet with a browser but YAST is still unable to access the repositories which are accessible with a browser. Can someone please help me what the problem with YAST is?
View 9 Replies
View Related
May 18, 2010
When I am closing yast, from time to time I get this error. Although something segfaults the system seems to behave normally and I do not experience other issues it seams. The error comes up in a small separate window. Yast stays operative. Should I be worried about something? What is the system complaining about actually? Although this happens quite often, it does not happen always.
System is: 11.1 with Linux linux-xu0v 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux and KDE 3.5.10 (r87) Yast: 2.17.69-0.1.1-x86_64
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib64/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running.
[Code]...
View 2 Replies
View Related
