After reboot the server will only allow 15 telnet sessions. I have checked in /dev but all the pseudo ports ttyp0 thru ttypf and ttyq0 thru ttyqf are there. The telnet daemon is running fine, but I am now running myself into a corner.
View 5 RepliesI have a couple of openSUSE 11.2 machines and each is directly connected to the Internet (they are not behind a router, firewall, etc). I want them to be able to communicate without any firewall restrictions, but keep the firewall rules for all other IP addresses. Is this possible? the software package I'm trying to use randomly chooses a port to use in the range of 32768-61000 and I don't feel comfortable having a port range that wide open on both machines.
View 5 Replies View RelatedI have a Suse 10.3 router with 4 network cards. 1 is to connect to the big network and thereby also the internet, 2 are for 'client' subnets and I want to use the last one as a DMZ. In this DMZ will be a web server which has to be accessible from the other 2 subnets and from the big network. I could do it with a few simple clicks in Yast firewall, but I have some issues with this firewall and there for I want to use it as minimal as possible, using Iptables.
So now I'm struggling a bit with Iptables. Basicly what I'm looking for is how to block all ports but 80 in this last subnet with iptables.
I'd like to have a port open for some streaming radio stations. However, I don't know if they are UDP or TCP or what "direction" to have them set up (inbound or outbound). I also don't know if they should be set up for "host" or "dynamic". The stations I'm interested in are the 181.fm channels mostly (shoutcast stations). We have a Westell A90 type modem/router from Verizon.
View 7 Replies View RelatedI'm using opensuse 11.3 32bit with LXDE. I have configured an apache tomcat server listening on port 8080. Yast was used to open udp 8080 and tcp 8080 in the firewall by manual entry under the advanced button of 'allowed services' menu.Another system was used to access the tomcat server via a firefox webbrowser. The attempt was unsuccessful. The url used was [URL]. firefox webbrowser keeps showing'connecting ...' until timeout. I'm assuming that inspite of the specified port openings in the firewall, it is somehow ignored. If I were to disable the firewall, then I can access the tomcat server with the firefox webbrowser.
View 2 Replies View RelatedI have a Opensuse 11.4 workstation that has two ethernet ports and I was wondering if there is the chance to use the other ethernet port as a switch to a Mac/PC?
View 2 Replies View RelatedI have troubels with internet, on different Linux x64 systems on my laptop(Lenovo ThinkPad sl510), but if I load WindowsPE all is OK ( what coud it be? where to search?There is an hardwere firewall/nat/gateway in my local network, it allows only connections to dst ports tcp 80 (http), udp 53 (dns) and no frags, no icmp, deny in and etc. But Windows Internet (the same Firefox) works fine , and under Linux sites doesn't loding full or "connetion timed out"...But if I have can start downloading any file it would be downloaded full (I have downloaded DVD iso of SuSe)Dns throu nslookup responce not evry time...Decreasing of MTU to 1372 didn't help (( Deactivating ip v6 also....What coud it be? What is different betwin Windows and Linux in DNS clients is any alternative dns client in SuSe? Is the trouble only in DNS?
View 1 Replies View RelatedI have a question about /etc/services file. If I open ports in firewall, do I need to alter /etc/services file in order for certain apps to work?
kpasswd 464/tcp # kpasswd
kpasswd 464/udp # kpasswd
# Theodore Ts'o <tytso&MIT.EDU>
# 465 is illegal used by eMail Server
smtps 465/tcp # eMail Server
#urd 465/tcp # URL Rendesvous Directory for SSM
igmpv3lite 465/udp # IGMP over UDP for SSM
# Toerless Eckert <eckert&cisco.com>
digital-vrc 466/tcp # digital-vrc
digital-vrc 466/udp # digital-vrc
Above example shows if 465 tcp isn't altered, Postfix MTA fails to listen on 465 tcp port. What if there's a bigger span 3000:7000 TCP/UDP, is there a need to alter each line by hand?
i have two questions and thought that anyone here could have the answers.first things first,i want to make firewall accept a range of ports (say 8000:9000) because im using mpd process manager to make some parallel processing, does anyone know the command that satisfy this?
the second thing is, when i open a range of ports like that, it would put my system at risk if some bad guys somehow identifies this range, is there is anything that solves that matter(i.e. makes the firewall monitor the packet, if its an mpd accept if not drop)
After a fresh install of suse 11.4, Yast cannot configure my local printer (Epson Epl-5700) because there is no parallel port available. How can I make parallel ports work?
View 5 Replies View RelatedHow to open RTP UDP ports (port_number : port_number) in openSUSE 11.2 firewall with yast?
View 2 Replies View RelatedI'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
I have loaded Suse 10.3 on a system that has 4 Ethernet ports, all Intel chipsets. 2 ports have the 82571 chipset, 1 port has the 82573 chipset and the last one has the 82567. The 82567 chipset can use the e1000 driver and the 8257x chipsets require the e1000e driver. We are only actually using the 82571 ports.
When the system is booted, the 82567 seems to get bound to the e1000 driver and the 82573 gets bound to the e1000e driver. Doing an "lsmod" I see both drivers loaded. It appears the 82571 drivers are getting bound to the e1000 driver which is a major problem. They work for a while but eventually they lock up with enormous error counts according to "ifconfig". How I know the e1000 driver is bound to the 82571 ports is that when I remove it(modprobe -r e1000) and then try to use one of them, I get a "network unreachable". When e1000 is loaded these ports seem to work fine. I tried modding the file in /etc/sysconfig/hardware that corresponds to the PCI address of these ports(i.e., hwcfg-bus-pci-0000:08:00.0) to force the module to e1000e, but no luck there either.
I just tried to setup telnet server by telnetd + inetd in cygwin 1.7, but not lucky.
Here is the command to setup inetd:
in inetd.conf I use default setting:
But after telnet the server, it will just stop at:
trace the source code, seems it stop in function getterminaltype by the lines:
I'm not familiar with the telnet protocol, so not sure what happening here.
I'm trying to configure an embedded device to run telnetd (yes, I know ssh is more secure - it's a backwards compatibility thing!) but it doesn't ask for my password.I've tried getting telnetd to run two ways:1) By adding the following line to /etc/inetd.conf:
Code:
telnet stream tcp nowait root /usr/sbin/telnetd telnetd -i
2) By running telnetd as its own service with a pre-prepared init.d script that just runs
[code]....
I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedI have a program that connects to the internet that I would like to route through one of my secondary network interfaces. I need one specific port routed to eth1 instead of eth0. I believe that I should be using iptables for that, but I don't really know how to do it.
View 14 Replies View RelatedThe other day I was using BitTornado and it was running so slow it was almost unholy. After some research I found out that if the yellow light was on it means I couldn't receive any incoming connections and had to open some ports on the firewall. That, my friends, is not the problem. I tried to manually open up the bittorrent port and did some other things that I can't quite remember but eventually I accidentally killed all bittorrent functionality on my laptop.
Is there any way I can reset my network and ports back to the default settings or am I utterly screwed? I'd really prefer not to have to reinstall my whole OS just to fix my bittorrent or worse, have to download on Vista *shudders*. I'd rather go back to my uber-slow bittorrent than none at all. I've tried everything I can think of, even the godlike might of Google couldn't get me out of this one. Now I am forced to bother you, all because I wanted to see a damn sci-fi film from Switzerland (Cargo[2009]).
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
How to create a user account on a Linux desktop machine with restrictions on connecting to the LAN, WAN, PCMCIA ports, Firewire, CDROM and generally any user controllable output options?
I have the task to set up a machine for users working with sensitive data that should not be leaving the machine where it is processed. This means disabling access to the ethernet device, lan, all other ports as mentioned earlier, and any other way of leaking the data.
In Mac OSX this was achieved using "Parental controls" from the System preferences; this even allows a selection of the applications that can be used. Under XP, Device Manager offers the option to click various devices and "Disable" them, which worked so far just fine. Some will point out that the latter mentioned OS may be easy to circumvent the security of in other ways, but that has been mitigated with other measures and it's not the point anyway. For the operator users in question, the aforementioned measure proved successful and worked.Using OSX and XP to do this was a 10-15 minutes job with testing included.
So far all guides and tutorials pointed to useradd, groups an facl, but in actual practical terms did not help at all, in fact most of the research did not render any practical results so far. I surely don't expect to point and click, and would gladly run a set of commands from CLI. If I had them. I would really would like to achieve the same restricted user account configuration in a concise, comprehensive and practical manner under Linux too. Preferably tested on humans before, and known to be workign, of course.
The machines that need to be set up are two laptops running Ubuntu. So how can this be accomplished in Linux?
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies View RelatedJust installed 11.3 kde. When running the live cd both wireless and ethernet devices appeared in the network connections manager utility. I even connected to a wireless AP.I just booted up for the first time and none of these devices are available. There is no network manager icon in the system tray, and when the network manager utility is maually opened the only connection type i can select is vpn.I know that opensuse should be able to recognize these devices since they were available and working via the live cd, so can anyone help me restore them?
One extra piece of info, is that I am sharing a home directory with a gnome ubuntu install. there were a few minor issues i dealt with initially, but i didnt need to change this user's UID like I have had to do in the past so that's good. Each time i open a terminal I get two pieces of output assuming from the bash startup saying something like.URL...I highly doubt that these problems are related, but figured I'd post. Also if someone knows the solution to that as well, that would save me a bit of googling.
I had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
I'm writting an app for desktop and embedded linux and I need to get information about the multiserial port, and I need to know which port is been used (by a printer, por example).The multiserial I'm using is an Altera Corporation Device 0004, and I just need to tell how many ports are there and how many is been used.
View 3 Replies View RelatedI have configured OpenSuSE 11.1 in VirtualBox and Networking was working fine and I was able to access network. Yesterday I recieved update notification from SuSE and updated machine. Now after restart eth0 is not comming up. In Hardware profile I can see Network Card but it is not configured automatically. I don't know how to configure it. Virtualbox Networking was working before latest update and just tried in other virtual machines.
View 9 Replies View RelatedHow can I tell if my USB ports are 2.0 ports?
View 1 Replies View RelatedI am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.