I just tried to setup telnet server by telnetd + inetd in cygwin 1.7, but not lucky.
Here is the command to setup inetd:
in inetd.conf I use default setting:
But after telnet the server, it will just stop at:
trace the source code, seems it stop in function getterminaltype by the lines:
I'm not familiar with the telnet protocol, so not sure what happening here.
I have a program that is completed under Linux, it requires library tidy, PCRE and libcurl, which could be found in Cygwin too.
I could compile my linux program through Cygwin and produce an EXE file, however it do require 'cygwin.dll' installed by the users.
I am wondering if I could have someway to produce out a stand-alone EXE file that could run independently from Cygwin ? ( I don't mind to combine that cygwin.dll and the EXE together for a larger EXE file).
I installed the CUnit framework which is a .tar.gz file from the bash shell in cygwin.
make gives me an error saying:
make install works
make clean works
I am not able to compile but install works I do not know if it is installed and as to where it is installed
when i checked it gives me a list of header files and also the lib files. I do not know as to why the make command is not working in cygwin. When i go to the bin directory it shows the make command.
I'm running cygwin 1.7 on a vanilla win2k3 r2 server. I've put together a simple crontab that I'll paste in her in a sec. The crontab entries call several shell scripts that do either scp's or rsync's from linux servers to this win2k3 box under cygwin.
The problem is that the scripts work and run fine from the commandline. Just not when called from the crontab. I'm running from the root equivalent administrator UID. The crontab log files are empty of errors.
crontab is:
Like I said, the scripts execute fine from the command line.
Based on previous forum discussions, I tried to install cygwin with 'make' installed from develop during installation. I can even see 'make.exe' in bin folder, but still while running the make command, it still shows error.
I was confused in one other part. Should I put the bin folder in some specific location or just wherever it is placed during cygwin installation? I was running VIC model, do I need to place the bin folder inside VIC source code folder.
I installed cygwin with rsync on a Win XP Machine. My goal is to backup a folder from one hard drive to another (both on XP machine).
I run the following command from a batch file:
Works fine except the --delete flag is not working. Copies everything in source to destination, but doesn't delete some extra files that are present on the destination, but aren't on the source, which it's supposed to. I looked at the rsync man page, and I'm doing everything right... such as not using wildcard.
The same command works perfect on another computer (XP machine; source and dest both on XP machine).
I've seen how to do this from native linux native server to linux native server. Not a problem. My question has to do with ssh/scp exchange of key exchange between a windows cygwin server and a linux server.There seems to be no /home/root/.. to hold the key exchange files. I've tried this between a cygwin server with a /home/administrator/..subdirectory and the /root subdirectory on the linux server. Is this how I should do this?Someone else set this up between these two servers earlier but forgot to document how it was done in his notes.I don't want to break the existing systems by setting up the key generation incorrectly on the functioning pair's of servers.
View 7 Replies View RelatedCentOS 5.4 Cygwin CYGWIN_NT-6.0-WOW64 1.7.5(0.225/5/3) I'm trying to setup password-less login from my CnetOS server to Win 2008 Server via ssh. I have followed the fab walk-through here and many others. When i try to connect I get this msg after a few seconds delay...
Code:
Connection closed by 10.8.0.6 When ran with ssh -vv...
Code:
[smegadmin@s ~]$ ssh -vv 10.8.0.6
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]....
As an example, I have two servers, sm-i222 and fileserv. sm-i222 is a Win2k3 system running cygwin. fileserv is a linux box running RHEL 4.7. sm-i222 maps /cygdrive/c to the c: drive and /cygdrive/d maps to the d: drive(actually a single 4TB RAID). from the sm-i222 server /cygdrive/c I call a small script from the crontab. The internal IP for fileserv is 10.0.0.7. See below.
cd /cygdrive/d/fileserv/home
rm -rf /cygdrive/d/fileserv/home/*
rsync -avz -e 'ssh -c blowfish' root@10.0.0.7:/home/* .
These three lines perform well in that they make a full transfer of the fileserv:/home/ directory on fileserv to the appropriate place on sm-i222 using rsync. I use rsync instead of scp because I have to traverse subdirectories and symbolic links in the /home/... filesystem on fileserv. What I'm looking to do is use rsync to do an incremental transfer/backup of only the files that have changed since the last full backup. I'll manage the times I do this manually or in crontab. A colleague says this is do-able, but not how. Rsync.org says this is do-able but not how. Cygwin says this is do-able... see rsync.org. I believe what I'm looking for is a single rsync line like I have above that only transfers the changed files on fileserv to sm-i222.
I'm running cygwin 1.7.7 on a win2k3R2 Standard edition server. I have a RHEL 4.7 linux host I'm scp'ing files from to the windows system using a simple cygwin scp command from what appears to be OpenSSH_5.5p1 on the cygwin host. When I run the simple scp command on the cygwin host, the counters initially display and increment/decrement, albeit what is at a much slower rate than is actually taking place. After the percent complete reaches a little less than 10%, all the counters from the cygwin console window cease to increment/decrement.
However, when I cd to the directory on the cygwin host where the file is being scp'ed to, the file is continuing to be transferred and a much higher rate than the counters seem to show. Finally, when the file transfer is complete by directly seeing the byte count as equal between the hosts, the scp counters will suddenly jump to 100% complete. This is not the case with my linux to linux scp's. The counters increment/decrement as expected and transfers are about what I'd expect over the same network infrastructure. This appears to be a cygwin ssh/scp implementation issue. I've posited this question to cygwin with no response as yet. The only reference I've been able to find on the 'net refers to buffering causing file transfers to appear to complete later than the transfer really does..........
I'm trying to configure an embedded device to run telnetd (yes, I know ssh is more secure - it's a backwards compatibility thing!) but it doesn't ask for my password.I've tried getting telnetd to run two ways:1) By adding the following line to /etc/inetd.conf:
Code:
telnet stream tcp nowait root /usr/sbin/telnetd telnetd -i
2) By running telnetd as its own service with a pre-prepared init.d script that just runs
[code]....
Has Inetd been updated to something else or has /etc/inetd.conf been changed to a different directory with Ubuntu 10.04?
Just curious, I'm was looking to set permissions on /etc/inetd.conf, but cannot find the file. If I just need to install it.
I want to configure following serivices on non-standard (or not well-known)port uisng RED-HAT LINUX INETD: TELNET, SSH, SNMP, FTP
1) Is there any issue/limitation doing this?
2) Any caveat or peculiarities related to any of the services?
no inetd file found in ubuntu 10.04 after i run command sudo apt-get install openbsd inetd still that file is not created : /etc/inetd.conf
View 3 Replies View RelatedI would like to support following sevices on non-standard port uisng INETD running on Red Hat LINUX:
SSH, SNMP, FTP
How to change the properties of inetd controlled services in Linux ? in linux it is xinetd controlled services.
View 3 Replies View RelatedIm trying to install proftpd on my debian server but i get this error
ProFTPd warning: cannot start neither in standalone nor in inetd/xinetd mode.
After reboot the server will only allow 15 telnet sessions. I have checked in /dev but all the pseudo ports ttyp0 thru ttypf and ttyq0 thru ttyqf are there. The telnet daemon is running fine, but I am now running myself into a corner.
View 5 Replies View RelatedI had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
As one of our friends told, I have downloaded and installed the CYGWIN on my winows xp pc, to learn and practice linux commands.when the icon of it is double clicked, its screen as appearing as below:
System1@system ~
$
MY DOUBT IS :
I could make a directory with command like mkdir. But after that it is not allowing commands like touch, vi, vim etc.How i have to write data or a file in it. Still anything to do after installing CYGWIN.
I am using cygwinI am getting these errors when i compile sim_routing.cc program by this command../../bin/cxx sim_routing.ccg++ -Wall -o sim_routing sim_routing.cxxfollowing errors comes../../common/priority_q.h : In member function 'bool guardedQueue<ITEM>::Validate(Const char*);error : there are no argument to 'strcat' that depend on template parameter so a declaration of 'strcat' must be avaible.error : <if you use -fpermissive g++ will accept your code but allowing use of undeclared name is deprecated>error : there are no argument to strcat that depends on template parameter,so declaration to strcat must be avaible
View 1 Replies View RelatedI want to install these libraries in cygwin, how do I do it? are all of them available on cygwin environment or only on linux?
g++ - the version 4.4
graphviz
gnuplot
plotdrop
[Code].....
I can't copy and paste into Cygwin... is there a good alternative to Cygwin that will let me do this?
View 7 Replies View RelatedI want to use the command more to see the content of a text file; however, the command is not available. I wonder whether all linux commands exist in cygwin. I am running cygwin on windows xp.
View 4 Replies View Relatedcan't find a decent forum (sourceforge.net has an awkward forum platform). I am having trouble getting a2ps to run under Cygwin on a Windows-7 box. And if you know of a forum specifically for users of a2ps
View 1 Replies View RelatedNew to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I've been searching the interwebs for a solution to a problem I'm having with cygwin, that is the ability to install! I thought it would be cool to install both firefox and gnash, so I've found out that I need gcc, gcc-++, and make, but the problem persists. Under firefox I get the error "checking for gcc... cl", but I've never installed (or able to install) cl.
The purpose I want this thread to serve in allowing people to see the best possible ways to setup cygwin. I have a startup script that I feel is pretty good for the fact that it's a relative path; I haven't figured out what some of the start options were in the other scripts so I just erased them!
i'm trying to install ns-allinone-2.29.2.tar in windows 7 by using cygwin installer..
At the starting i got this message
Code:
* Testing for Cygwin environment
Cygwin detected
Note: Cygwin install is still considered EXPERIMENTAL
Checking Cygwin version is >= 1.3.12... 1.7.8 (should be ok)
Checking filesystems are mounted as UNIX filetype... yes
Checking default mode is binmode... yes
[Code]...
I have installed cygwin 1.7.5. But the command "file" (check the type of a file) is missing. I tried to re-install, but could not find it on installation program. Where is it?
View 2 Replies View RelatedI have the binaries: perl-5.10.1-3.tar.bz2 and I don't have access (admin privileges) to run setup.exe for cygwin, my question is how can I install manually inside cygwin the module for perl: perl-5.10.1-3.tar.bz2?(or maybe can I get the sources and compile? can someone tell me please how?)
View 1 Replies View Related