OpenSUSE Install :: Sudden Failure Of BIOS To Detect New Harddisk?
Feb 5, 2010
I have problems with my acer aspire M1201. I have added a 2GB RAM beside the 1GB stock RAM. Currently I have reformatted my stock Hitachi HDD 160GB and I have added another HDD in which it is a Samsung 500GB HDD SATA drive. I have successfully installed GNU/Linux Opensuse 11.2 OS in the new harddrive (Samsung). Besides all that, the other specifications are all stock. After 2 days of successful runs in the new OS and no problems at all, the OS hangs and fails to boot and displays this, Error 18 : Selected cylinder exceeds maximum supported by BIOS. I should mention also that while setting screensaver, when I chose OpenGL, the OS hangs and i have to hard-reset my pc. I suspect that the current BIOS version which is R03-B1 and product name ACRA8000-S03-990610-R03-B1 needed update due to new hardware. But currently there is no new downloads in Acer's website regarding my BIOS version. What should I do to run my Linux successfully? I should also mention that I haven't logged to the internet due to unsuccessful dialer which i have consulted my internet service provider and yet to rectify.
View 9 Replies
ADVERTISEMENT
May 11, 2010
Aftrer use "Suspend to RAM" my system hang and show many error messages ("read error" or something like this), after restart BIOS can't find disk at all. I have latest version Kubuntu 64bit, (few days ago upgraded) and Segate SATA disk.
View 3 Replies
View Related
Nov 14, 2010
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
View 8 Replies
View Related
Dec 18, 2010
I was connecting to the internet with no problems at all until two days ago. a while back I set my local IP to #.#.#.11, the internet failed.
Code:
I removed the added code from /etc/network/interfaces and the internet started up again, however the card retained the .11 IP address and has done through many installs... Don't know why or how, probably just a router DHCP setting not retiring the IP of machines.
That wasn't a problem as far as I know.
Ok, so I check a wired connected win7 pc and an ipconfig /all shows he's got the #.#.#.11 address. Checked a wireless win7 netbook and it got a #.#.#.24 address
Wireless key double checked and is correct.
I'm now on my WinXP partition (dual boot with the same ubuntu install that won't connect to the internet) it's getting the IP #.#.#.5 and is connecting with no trouble(albeit slow windows)
All machines are set to automatic configure, but obviously retain the same ip for a while.
I've tried
Code:
iwconfig show that the wireless card is indeed wlan0
Here's basic information
Code:
Wireless card on non-connecting machine: Belkin N+ wireless card, v2001, NDISWRAPPER
will this work?:
Code:
The problem is that if I try and connect to the router it does the "connecting rotating circle" and then just either has a message "disconnected from wireless" or asks me again and again for the WPA key, which is already correct.
LiveCD and fresh install both fail, used ndiswrapper and it's always worked fine before.
using Ubuntu 10.04
How I can get connected again? This is a desktop, a wired connection is just NOT possible.
View 8 Replies
View Related
May 18, 2010
i am new to open suse i just installed it now on one of the partition on ma hard disk but not able to access other partitions.
View 2 Replies
View Related
Nov 28, 2010
While installing OpenSUse i created a seperate drive for my personal files. Instead of mounting it to /home i mounted it to /usr/.....please tell me how to mount it back to /home user so that it has my files only
View 8 Replies
View Related
May 12, 2010
I am using a Dell dimension 4550 with pentium 4 processor. My current BOIS is A01. I am running Slackware 13. My current problem is that whenever I reboot, the keyboard fails just before the kernel selection page. This isn't a huge problem because I only have one kernel to boot but it is quite annoying. Whenever I shutdown the computer and boot it up again the keyboard works fine. The problem only occurs when I reboot.How do I fix this? Would updating the BIOS solve the problem?
View 8 Replies
View Related
Dec 24, 2010
everex gPC2 tc2512 they went under
ubuntu 804 hardy
no windows
single boot
my onboard video is going bad.i have a radeon 9250 pci 256mb v/d/vo card.i would like to install before the onboard goes all the way out.how and what all do i need to do.what do i look for and change in the bios.yes it may be the power pack but if not i can not install the video card later
View 9 Replies
View Related
Feb 19, 2010
I need to flash my BIOS to get rid of an error: "Intel uCode loading error". On [URL] I have found a tutorial, that looks to be fine. I can even see in the comments, that somebody have done this with success from Ubuntu 9.04, the very same system, that I use. Nevertheless I cannot make this bootCD with my Ubuntu 9.04, as it doesn't know the loop option to mount the image.
In the tutorial it says: "Requirements for this step is that you have support for the vfat and loop file systems in the kernel. Or you can have those features compiled as modules. In the latter case you can load the modules before the next step, like this:
modprobe vfat
modprobe loop"
loop doesn't seem to be present in my system, and the command modprobe loop returns an error that the module is not available. I tried to follow the tutorial anyway, but with no success. How can I get the module lopp? I also want to use it to make iso images bootsble from the harddisk.
View 2 Replies
View Related
Jan 7, 2010
I had my motherboard fail and had to do a replacement. The motherboard I got has a feature (I don't think I can shut off) that lets you select what drive you want to boot off of. I have XP installed on the first drive and openSUSE 11.1 on the second drive. I am running openSUSE 11.2 with KDE 3.5 and I simply dropped my drives onto this new motherboard. I can boot up (Linux) just fine but am having other issues with my mouse. I am thinking of Updating to openSUSE 11.2 and the current KDE version.
Should I just update to 11.2 or do a new install. I have LOTS of data in my home directory I really don't want to lose and have a partition for data as well that is pretty full. I don't want to lose this stuff. What should I do about Grub with this BIOS that lets you pick which drive to boot off of? Put Grub in the MBR of the drive with openSUSE on it and nuke the MBR of the XP drive?
View 9 Replies
View Related
Dec 27, 2009
i am trying to let my BIOS boot up from a CD afther installing openSUSE. so i went to my bios and configured it to boot to cd first then hdd, but it went to my hdd first. no cd..
i am trying to install another OS from cd..
View 9 Replies
View Related
Aug 20, 2010
I have installed openSUSE-11.3and notice the following line in boot.msg:
WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 512MB of RAM.
AMI BIOS shows 6043MB usable RAM
--- excerpt boot.msg ---
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[ 0.000000] e820 update range: 00000000ddc00000 - 0000000100000000 (usable) ==> (reserved)
[Code].....
View 4 Replies
View Related
Aug 29, 2010
Under Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
View 9 Replies
View Related
Aug 27, 2010
How to install Coreboot (GPL BIOS) from openSUSE.
View 8 Replies
View Related
Dec 9, 2010
I'm attempting to upgrade the BIOS in an ASUS 1005HA netbook. The netbook runs SuSE 11.3, and no other OS. All the BIOS utilities on from ASUS are Windows or DOS based. ASUS has a utility titled afudos that apparently flashes the programmable ROM. Running afudos using the dosemu utility suggests that one needs to create a DOS boot drive, execute afudos during a reboot with the new ROM image located on the drive.
How does one accomplish said task on a netbook without a floppy disc drive? Do I create a bootable DOS USB flash drive that contains just afudos and the new bios flash rom upgrade? And if so, how does one do this? As a side issue, it looks like all the major motherboard vendors do not support Linux. That is, all the motherboard drivers require Windows or DOS.
View 7 Replies
View Related
Mar 12, 2011
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies
View Related
May 16, 2011
Recently, for whatever reason (I am led to suspect a bad hard drive), Windows 7 failed to boot even in safe mode so I decided to just use a clear hard drive and install a far less troublesome OS, so I decided to try to use openSUSE. I used a backup laptop to download and burn the 4.7 GB release. Problem is, I haven't a clue how to get it to work. I thought just placing the burned DVD in when booting would be enough, but the BIOS keeps telling me it fails to launch from CD. Luckily, I had enough foresight to download a live CD just in case. I was able to install from the live CD, and when I checked the DVD, I was able to access all the content.
But I haven't a clue how to use it to upgrade/install all the extra software. Also, I should add I am completely new to this whole thing. While I have used Linux before, for the most part others dealt with all the administrative aspects of ensuring the system actually ran/had the needed software on it. Finally, I have one major restriction placed on this whole issue. I live out in the middle of no-where and the only internet I can get is limited to 200MB a day (I downloaded the CD/DVD elsewhere, but normally don't have a chance to do that). As such, being able to install from the DVD and not needing to download much software would be nice.
View 1 Replies
View Related
Sep 1, 2011
I have a problem where my PC will stop at the BIOS logo screen after a reboot. The keyboard and mouse don't get power ie no lights. I can power off / on and it will boot normally. The problem started after a fresh install and after installing the updates. ie before updates I could reboot and it was ok. I moved from Slackware and have Win7 and they don't have this problem. Also Ubuntu and Arch rebooted normally when I tried them. I have Opensuse 11.4 x64 on it's own HDD (Samsung F3) The system board is an Asus P8P67 Deluxe (Sandy Bridge) and the HDD is on a SATA3 port. Could it have something to do with the EFI BIOS? Would it be worth trying a newer kernel? it may better support my hardware. I'm hesitant as I don't want to break Lirc as it took awhile to get it working properly on the stock kernel.
Also where can I add '/etc/init.d/lirc restart' so I don't have to run it manually every time time I launch XBMC. I couldn't find 'rc.local'
View 7 Replies
View Related
Aug 5, 2014
So, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?
View 9 Replies
View Related
Feb 21, 2010
so i have a main drive (320gb) which currently has kubuntu 9.04 installed.i also have a side drive (60gb) on which i made a backup of all my windows files (i wanted to migrate to new windows OS but messed up, long stupid story...) and also had opensuse 11.0 installed.now when i open either 2 linux versions, the ntfs partition isnt recognised anymore.there are files on it that i need, including the iso of the windows version i want to install next to opensuse (just like my old windows version)
View 5 Replies
View Related
Jun 8, 2010
I have some trouble booting the current KDE Live Cd (11.2) on my Laptop. I tried USB and CD both. The laptop hangs on the bios bootscreen and I cant select any further option like a boot device. No problem I have with an Ubuntu CD.
View 9 Replies
View Related
Mar 15, 2011
Some posts say 11.3 and newer automatically detect drives that have 4kb sectors, and partition things accordingly. But other recent posts specifically about 11.4 say, no, you still have to prepare the drive manually before installing, to be sure things are optimized.
View 9 Replies
View Related
Feb 24, 2011
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies
View Related
Jun 18, 2011
how can I clone my installed ubuntu to a new harddisk? with 32bit ubuntu I have used:tar cvpzf -> create a tar file on my external nas system. after that I have done a restore tar xvpfz - worked with 32 bit.
Alternative I have mounted both disks and via another linux partition I have used:
cp -rvbdR /source/* /target
both methodes worked with ubuntu 32 bit. With 64 bit ubuntu I can NOT get it to work. error message after booting the clone: /var/lib/gdm/.ICEauthoriy ..
I can see that /source/var/lib/gdm has different rights as /target - will be part of the problem.
This did not happen with the 32 bit ubuntu - but why ?
View 3 Replies
View Related
May 30, 2011
My OS11.4 KDE 64 bit I'm trying to install Win4LinPro and I get this error message. "An internal system error has occurred. A problem that we were not expecting has occurred. Please report this bug with the error description. Details: [PK_TMP_DIR|dir:///var/tmp/TmpDir.vZjMM9] Repository already exists". When I click OK the install shuts down.
View 6 Replies
View Related
Dec 19, 2009
Resently I installed OpenSUSE 11.1 including XEN as I planned to use virtual machines. XEN item appeared in GRUB boot menu along with other items (OpenSUSE, windows...).I was instructed to boot XEN in order to use virtual machines.During boot, XEN was examining my disks and partitions, and when it reached CD and DVD drives, seemingly it went into infinite loop between the two drives. Finaly the screen went dark, and I have to make hard reboot. How can I work around this problem?
View 3 Replies
View Related
Feb 2, 2010
I'm absolotly not sure, if I'm right here. During start I see the message "unknown (unsupported) BIOS version Acer/Aspire 6920/V1.14 , please report, aborting!"but I did not found any Mail or URI, where I can report this one. So I paste the partof the boot.msg here. Hopefully it will be on the right place. If not :
Acer-6920:/var/log # cat boot.msg |grep 8.82
<4>[ 0.038082] [<c0208056>] show_trace+0x26/0x40
<4>[ 0.185822] [<c048ef1c>] acpi_tb_load_namespace+0x6e/0x136
<4>[ 0.185827] [<c048effa>] acpi_load_tables+0x16/0x4b
[code]...
View 1 Replies
View Related
Aug 16, 2011
After upgrading several packages (can't remember which now) I can't login with the graphical login. It accepts the password, starts to load, but then dies and dumps me back at the login prompt again.Attempting to login from the prompt, sometimes works (there is specific condition), and when it does, I then attempt to "startx". OK, it complains the display is already in use, so I then "startx -- :1". Everything starts to load, but then fails again like the graphical login.
checking /var/log/Xorg.1.log I see no errors [EE].checking /home/***/.xsession-errors I see the following.xauth: file /home/***/.serverauth.15914 does not existI have also tried as another forum suggested and rename the .kde4 and the .skel directories to something else. Login via graphical and prompt still both fail.I have also tried logging in with another window manger. That also fails.However, I have also tried creating a new user and logging in. That works. It is from this user account that I write the postI have attempted copying over all of the application settings from the corrupted user account, but some things are missing and there are various personal project directories and permissions that are causing issues. Therefore I would like to repair the corrupted account. Where do I begin to fix the corrupted account?OS: Linux 3.0.1-40-desktop i686System: openSUSE 11.4 (i586)KDE: 4.6.5 (4.6.5) "release 4"Video: nouveau
View 9 Replies
View Related
Mar 7, 2009
Like the title says. Suddenly, for no apparent reason KDE jumps to 100% cpu usage. I've tried tracking this down and it's frustrating. Sometimes I have to reboot 2 or 3 times to get it back down.
View 9 Replies
View Related
