OpenSUSE Install :: KDE & Startx Login Failure?
Aug 16, 2011
After upgrading several packages (can't remember which now) I can't login with the graphical login. It accepts the password, starts to load, but then dies and dumps me back at the login prompt again.Attempting to login from the prompt, sometimes works (there is specific condition), and when it does, I then attempt to "startx". OK, it complains the display is already in use, so I then "startx -- :1". Everything starts to load, but then fails again like the graphical login.
checking /var/log/Xorg.1.log I see no errors [EE].checking /home/***/.xsession-errors I see the following.xauth: file /home/***/.serverauth.15914 does not existI have also tried as another forum suggested and rename the .kde4 and the .skel directories to something else. Login via graphical and prompt still both fail.I have also tried logging in with another window manger. That also fails.However, I have also tried creating a new user and logging in. That works. It is from this user account that I write the postI have attempted copying over all of the application settings from the corrupted user account, but some things are missing and there are various personal project directories and permissions that are causing issues. Therefore I would like to repair the corrupted account. Where do I begin to fix the corrupted account?OS: Linux 3.0.1-40-desktop i686System: openSUSE 11.4 (i586)KDE: 4.6.5 (4.6.5) "release 4"Video: nouveau
View 9 Replies
ADVERTISEMENT
May 20, 2010
I got an opensuse 10.2 on a aged desktop. Once start, it just stops at command line login prompt. I have to login and type 'startx' to get the GUI. Since I haven't used this computer for over half year. I couldn't remember what I did last time. Any tips for this problem?
View 4 Replies
View Related
Mar 8, 2011
Whenever I load up my computer, Ubuntu comes up with a command line asking for my user name and password. I can type all that in, and get into the system, but it's still in the command line. If I type startx, it will then load the GUI desktop just fine. Is there any particular reason it wont' boot straight into a GUI login screen?
I originally had Ubuntu dual booted with Windows 7, and was having this problem. When I installed Ubuntu fresh on an external hdd, the issue went away. However, I recently formatted the hdd and re-installed Ubuntu and now it's doing this again.
View 8 Replies
View Related
Jun 30, 2010
I can boot up ubuntu but it's just showing the default background, the login prompt won't come up. What do I do? Startx doesn't work in the terminal (ctrl-alt F1), it gives an error. I can log in as root (recovery mode) and startx works and the desktop comes up though.
View 5 Replies
View Related
Jan 5, 2011
afeter installing ubuntu studio 10.10 a black login screen after login it asking me to type a command i've typed '' startx '' but it does't work
View 2 Replies
View Related
Jun 23, 2010
- is there a way to set the default user in console login so that all needed is to press enter(or event without it) to be able to input the password for that user - also is it possible to console login without password, by just inputting user name and pressing enter how to put startx for that user right on login, so that the user doesn't input the command manually
View 6 Replies
View Related
May 30, 2011
My OS11.4 KDE 64 bit I'm trying to install Win4LinPro and I get this error message. "An internal system error has occurred. A problem that we were not expecting has occurred. Please report this bug with the error description. Details: [PK_TMP_DIR|dir:///var/tmp/TmpDir.vZjMM9] Repository already exists". When I click OK the install shuts down.
View 6 Replies
View Related
Dec 19, 2009
Resently I installed OpenSUSE 11.1 including XEN as I planned to use virtual machines. XEN item appeared in GRUB boot menu along with other items (OpenSUSE, windows...).I was instructed to boot XEN in order to use virtual machines.During boot, XEN was examining my disks and partitions, and when it reached CD and DVD drives, seemingly it went into infinite loop between the two drives. Finaly the screen went dark, and I have to make hard reboot. How can I work around this problem?
View 3 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Jun 2, 2010
i'm using OpenSuSE 11.2 and was wondering if there is anyway to set remote login as the default login method.
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Dec 10, 2009
2 weeks ago, my power supply blew, during close-down. My system is a SUSE Linux 10.1 and openSUSE 11.1 dual boot with WInXP (for those family things). After replacing the power supply my system had no root partition, or loader. It said something like "Invalid Partition table". Grub had gone! So following swerdna's "How to Boot into openSUSE" tutorial I used the openSuse 11.1 install CD rescue option to get to the command prompt, su'd, went to grub and followed the stated commands. So far so good.
However the new grub entry openSUSE (Failsafe) has a problem. It starts to boot in the usual way, but I note fatal Module errors in the boot log relating to sata_nv not found, ide_pci_generic not found etc, and Fatal error inserting edd (/lib/modules/2.6.27.39-0.2-default/kernel/driver/firmware/edd.ko): no such device but uses udev as boot source until Waiting for device /dev/disk/by-id/ataST3120827AS-4M60PX7V-part6...... and then it exits to /bin/sh.
My fdisk looks
Dev Boot Start End Blocks Id Syst
/dev/sda1 1 1306 10490413 c w95 fat32
/dev/sda2 1307 2612 10690445 c w95 fat32
/dev/sda3 * 2613 14593 96237382 f w95 ext'd
/dev/sda5 5486 8096 20972862 83 linux
/dev/sda6 8097 10695 20987643 83 linux
/dev/sda7 10699 14593 31310653+ 83 linux
View 5 Replies
View Related
Jun 21, 2011
the power on my street went out overnight, and I came home to a rebooted computer at the command line. I shut it down and rebooted again, also tried the failsafe mode, but it keeps going to the command line. Looked in the BIOS and it didn't see my hard drive settings. But I can see the HD fine when I booted using the live CD (that's how I am able to post here
View 4 Replies
View Related
Sep 17, 2010
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
View 9 Replies
View Related
May 21, 2009
openSUSE Install/Boot/Login: I am looking for a Linux distribution with a working LTSP OOTB. LTSP-openSUSE / KIWI-LTSP looks interesting (http://en.opensuse.org/LTSP).
When I boot openSUSE-11.1-DVD-i586.iso, go through the installer, and attempt to use encrypted LVM, I get the following error dialog:
Code:
YaST2
Error Failure occurred during following action: Setting up encrypted dm device on /dev/sda2 System error code was: -3034
View 1 Replies
View Related
Feb 5, 2010
I have problems with my acer aspire M1201. I have added a 2GB RAM beside the 1GB stock RAM. Currently I have reformatted my stock Hitachi HDD 160GB and I have added another HDD in which it is a Samsung 500GB HDD SATA drive. I have successfully installed GNU/Linux Opensuse 11.2 OS in the new harddrive (Samsung). Besides all that, the other specifications are all stock. After 2 days of successful runs in the new OS and no problems at all, the OS hangs and fails to boot and displays this, Error 18 : Selected cylinder exceeds maximum supported by BIOS. I should mention also that while setting screensaver, when I chose OpenGL, the OS hangs and i have to hard-reset my pc. I suspect that the current BIOS version which is R03-B1 and product name ACRA8000-S03-990610-R03-B1 needed update due to new hardware. But currently there is no new downloads in Acer's website regarding my BIOS version. What should I do to run my Linux successfully? I should also mention that I haven't logged to the internet due to unsuccessful dialer which i have consulted my internet service provider and yet to rectify.
View 9 Replies
View Related
Apr 27, 2010
Unfortunately my laptop was powered off whilst the Updater Applet was doing an update. Now, after a reboot, the system always fails when updating. Neither the Updater Applet nor yast does succeed. To me it looks like some involved DB got corrupted. The error messages are shown below.
Code:
Subprocess failed. Error: RPM failed: error: package systemtap-runtime-0.9.9-2.4.i586 is not installed
Code:
Subprocess failed. Error: RPM fehlgeschlagen: error: db4 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db4 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
View 4 Replies
View Related
Aug 7, 2010
I got three times fsck failure during system booting, fixed issue by reinstall whole suse last two times, this time I really do not want reinstall.
View 4 Replies
View Related
Oct 15, 2010
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies
View Related
Nov 19, 2010
Recently, I had to switch harddrives on one of my servers due to the need for hardware.
However, when I switched back to the original harddrive I got a surprise : Instead of booting normally in OpenSuse 11.3, it booted in the grub shell.
I did a root ( hd0,1) but when I attempted the setup cmd it failed. Thinking that I probably was a configuration error ( nothing was changed - the drive had spent some time in a nice anti static bag ) I booted using a USB key.
To my surprise I got a message stating that parted couldn't read the other partitions ( boot and swap ) and hence I would not be able to edit then. Fortunately, the data partition seemed OK so I can backup the data.
Preferbly, I would like to be able to restore my original system.
View 2 Replies
View Related
Jul 26, 2010
OpenSUSE 11.1; kernel 2.6.31.12-0.2-default
Tried to configure via:
Zoom CD driver: 1.06_k2.6.22.17_01_default-1suse.i586.rpm
linuxant driver: dgcmodem-1.13_k2.6.31.5_0.1_pae-1suse.i586.rpm
[code]....
View 8 Replies
View Related
Feb 12, 2010
I've been trying to get SELinux working in OpenSUSE 11.2. So far I can get to runlevel 3 with enforcing=0. Before I start tinkering with audit2allow, The 11.2 repository gives me these policy rpms:
[URL]
But that version of policy has some issues in OpenSUSE:
1) failure to allow the graphical desktop to load (even with enforcing=0) . The following message appears in the console during boot:
** (gdm:1073): WARNING **: Couldn't connect to system bus: A SELinux policy prevents this sender from sending this message to this recipient (rejected message had sender "(unset)" interface "org.freedesktop.DBus" member "Hello" erro name "(unset)" destination "org.freedesktop.DBus") startproc: exit status of parent of /usr/sbin/gdm: 1 Since enforcing is off, I'm surprised to see a message like that. SELinux shouldn't be preventing anything, so I don't see how modifying policy will solve that. Ideas?
2) Attempting to boot to runlevel 5 with kernel parms "security=selinux selinux=1 enforcing=0", I'm dropped off in runlevel 3 instead. I'm getting a couple of pages of AVC errors after boot (see below). I've tried several other versions of the policy without luck:
- the version included in Fedora 12 (refpolicy-2.2009117
- the latest release from Tresys
- the latest from the repository at Tresys
[Code]....
View 2 Replies
View Related
May 8, 2011
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
View 5 Replies
View Related
