Like the title says. Suddenly, for no apparent reason KDE jumps to 100% cpu usage. I've tried tracking this down and it's frustrating. Sometimes I have to reboot 2 or 3 times to get it back down.
View 9 Replies
My memory usage keeps building up and up as time goes by, when it hits 100% it logs me out. I have a tad over 9 Gib in swap, that is how it was set up when I did auto install and let it do the partitions. I have 4Gib memory. When I first log in it shows about about 800+ MB being used and starts adding more from there. I can run applications for about 6-8 hours before it hits the 100% marker. At first I was blaming this on the video player, but when I put on a play list each song seems like it gets stuck in memory also adding about .02% per song to max memory.
This seems to pertain to each application I do. Uploaded with ImageShack.us. This pic shows my Computer setting and usage through system monitor and conky script. In another note, I never see my Swap partition being used at all. I am real green to linux and not sure if I was suppose to turn something on. In the partitioner it shows it being mounted and as swap.
I have this happening on my vaio laptop and FC11- top shows /usr/share/scripts/shared/onlyservice or /usr/share/logwatch/scripts/shared/onlyservice running %100 of one core of my CPU. It takes 30 to 40 min to stop. Same thing happens when I go to a GUI log-viewer. This, of course wouldn't matter on a desktop, but with a laptop it's kinda expensive. On boot up after the grub I get error: Invalid TSD data!
View 11 Replies View RelatedMy CPU usage suddenly started oscillating between 5% and 80% causing the computer to lag very badly. This problem came on suddenly--I was using the computer the night before and then the next day I was hit with the lag.Computer info:
IBM Lenovo ThinkpadR61 with Ubuntu 10.04 Lucid Lynx
Intel Duo Core 2GHz Processor T7300
2.5GB RAM (2GB Kingston DDR2 + 512MB DDR2 not sure what brand)
[code]....
Nagios had alerted me that the server had a very high load average exceeding the critical level (17+), when logging onto the server I found that all 4GB of the swap was in use despite the fact that there was 15GB+ of free memory (and that's not even including memory from cache and buffers!) Because it seems all heavily used pages were being stored in swap, the I/O wait on the server became very high, and 4 kswapd daemons were taking up nearly 100% available CPU. This did coincide with an error reported by Bacula during a backup job while changing to a bad tape...
From /var/log/bacula.log:
Code:
10-Dec 02:11 bacula-sd JobId 1898: End of medium on Volume "4097" Bytes=434,170,000,000 Blocks=217,084 at 10-Dec-2010 02:11.
10-Dec 02:11 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4097, drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 02:12 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4096, drive 0" command.
10-Dec 02:13 bacula-sd JobId 1898: 3305 Autochanger "load slot 4096, drive 0", status is OK.
10-Dec 02:13 bacula-sd JobId 1898: Volume "4096" previously written, moving to end of data.
10-Dec 03:51 bacula-sd JobId 1898: Error: Unable to position to end of data on device "Tape-1" (/dev/IBMtape0n): ERR=dev.c:1384 read e
rror on "Tape-1" (/dev/IBMtape0n). ERR=Input/output error.
10-Dec 03:51 bacula-sd JobId 1898: Marking Volume "4096" in Error in Catalog.
10-Dec 03:51 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4096, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 03:58 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4098, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3305 Autochanger "load slot 4098, drive 0", status is OK.
10-Dec 03:59 bacula-sd JobId 1898: Wrote label to prelabeled Volume "4098" on device "Tape-1" (/dev/IBMtape0n)
10-Dec 03:59 bacula-sd JobId 1898: New volume "4098" mounted on device "Tape-1" (/dev/IBMtape0n) at 10-Dec-2010 03:59.
At the same time, these messages starting occuring in /var/log/messages:
Code:
Dec 10 03:51:47 07 kernel: Mem-info:
Dec 10 03:51:47 07 kernel: Node 0 DMA per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: Node 0 DMA32 per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 186, batch 31 used:162
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 62, batch 15 used:48
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 186, batch 31 used:18
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 186, batch 31 used:159
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 62, batch 15 used:56
...
Dec 10 03:51:47 07 kernel: Node 3 HighMem per-cpu: empty
Dec 10 03:51:47 07 kernel: Free pages: 732052kB (0kB HighMem)
Dec 10 03:51:47 07 kernel: Active:4232128 inactive:3071288 dirty:158210 writeback:0 unstable:0 free:183320 slab:256840 mapped-file:289545 mapped-anon:3805487 pagetables:13063
Dec 10 03:51:47 07 kernel: Node 0 DMA free:10796kB min:4kB low:4kB high:4kB active:0kB inactive:0kB present:10356kB pages_scanned:0 all_unreclaimable? yes
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 3512 9067 9067
Dec 10 03:51:47 07 kernel: Node 0 DMA32 free:213332kB min:2500kB low:3124kB high:3748kB active:1794108kB inactive:1463220kB present:3596296kB pages_scanned:64 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 5555 5555
Dec 10 03:51:47 07 kernel: Node 0 Normal free:41028kB min:3952kB low:4940kB high:5928kB active:3409444kB inactive:1471120kB present:5688320kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 0 HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 1 DMA free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
...
Well to cut a long story short, I fixed the problem by disabling the swap partition with 'swapoff'. After about 30 mins all the swap was freed and the server went back to normal. I don't dare reactivate the swap partition and unfortunately as this is a live server which currently has no fail over, I can't reboot either
Server Spec:
4 * Dual-Core AMD Opteron(tm) Processor 8214
32GB DDR2 ECC RAM
RHEL 5.5, 2.6.18-194.11.3.el5 SMP x86_64
Running many KVM VMs (All CentOS x64) and kksmd is used.
bacula-dir Version: 5.0.0
IBM Tape Drive using lin_tape module version 1.34.0 according to modinfo
And before anybody asks
# sysctl vm.swappiness
vm.swappiness = 10
I am running a HP dc5750 dual core computer with a 512MB Nvidia 7200/7300 graphics card my operating system is Ubuntu 10.10. Both my processors are operating at 98-104% cpu usage, it appears that gnome-appearance-properties is the culprit and the only way to return to normal is to end these processes. I have been setting up the desktop cube to my liking and the processor appears to rise up to 100% again. Would getting a 1GB graphics card correct this or is this a bug in maverick meerkat. Any advice would be appreciated. Please keep it simply as I am a Newbie to Linux and find things over-whelming at times. Also would running at 100% on both processors at indefinite periods of time harm my computer.
View 3 Replies View RelatedMy pc freezes when firefox is running not only to open a new tab but also to browse some pictures and flash video. The screen freezes, no Keyboard response. Only mouse pointer can be moved but it cannot execute any program. That means I can see the mouse pointer moves but it cannot click on any icon. I have to ssh from my laptop to my PC and kill firefox process but can't get any improvement. The screen is still freezing. Then I have no choice but to use root right to restart the pc. This system freezing has happens many times since the PC system was updated from openSUSE 11.3 to 11.4 one month ago.
It's really random and I don't know when it will happen next time. But when it happens then I have no choice but to restart computer again. I notice that every time when PC freezes, the Xorg occupies 100% cpu resource and as long as keeping this status. Even when the PC dose not freeze, I feel the mouse point does not moves so smoothly. It could stop for a very very short time in its moving. I did not find this moving problem when I was using openSUSE 11.3. I guess it may caused by the video card driver which may not installed appropriately on my openSUSE 11.4.
Using "lspci |grep VGA" I get the following video card information:
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
Suse 11.3 KDE 4.4 Amarok - Standard version that comes with 11.3 I start Amarok, which still worked fine yesterday and this morning. I get the Amarok splash screen and then it disappears and the Crash Handler with the following message appears.
[code]...
I want to use my QTCurve theme for GTK apps. This has worked great for several months on opensuse 11.2, and suddenly it broke. I do not know what made it broke, purhaps some kind of system update...The gtk-Qtcurve engines are installed (both 32 and 64 bit). I tried linking the gtkrc file from /usr/share/themes/QtCurve/gtk-2.0 towards /etc/gtk-2.0 but that didn't help either. I can change the GTK themes to whatever theme, except to QTCurve...
View 7 Replies View RelatedI have problems with my acer aspire M1201. I have added a 2GB RAM beside the 1GB stock RAM. Currently I have reformatted my stock Hitachi HDD 160GB and I have added another HDD in which it is a Samsung 500GB HDD SATA drive. I have successfully installed GNU/Linux Opensuse 11.2 OS in the new harddrive (Samsung). Besides all that, the other specifications are all stock. After 2 days of successful runs in the new OS and no problems at all, the OS hangs and fails to boot and displays this, Error 18 : Selected cylinder exceeds maximum supported by BIOS. I should mention also that while setting screensaver, when I chose OpenGL, the OS hangs and i have to hard-reset my pc. I suspect that the current BIOS version which is R03-B1 and product name ACRA8000-S03-990610-R03-B1 needed update due to new hardware. But currently there is no new downloads in Acer's website regarding my BIOS version. What should I do to run my Linux successfully? I should also mention that I haven't logged to the internet due to unsuccessful dialer which i have consulted my internet service provider and yet to rectify.
View 9 Replies View RelatedHow do I find out the network usage ie the total amount of data is transferred in or out of my computer (openSUSE 11.2 and gnome) and keep a track of the total network usage?
View 1 Replies View RelatedI was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.
View 14 Replies View RelatedI'm running into a problem where my system is running out of disk space on the root partition, but I can't figure out where the runaway usage is. I've had a stable system for a couple of years now, and it just ran out of space. I cleaned some files up to get the system workable again, but can't find the big usage area, and I'm getting conflicting results.For example, when I do a df it says I'm using 44GB out of 58 GB:
Code:
[root@Zion ~]# df -h
Filesystem Size Used Avail Use% Mounted on
[code]....
Is there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!
View 2 Replies View RelatedIt should give me daily internet usage stats something/vaguely like this:-I have tried ntop and darkstat ,but they were too complicated and cannot be launched from notification area like this..Also tried using KtrafficAnlyzer by installing KDE core, i am not very amused by the idea of having to install a massive run time file package for a simple tool.
View 4 Replies View RelatedI am having a problem with Amarok 1.4.10 in openSUSE 11.1 that was not in 10.3. When Amarok is playing, the hard drive is in constant use. If something else, like a find, runs Amarok starts skipping. There is also a skip when ever I un-pause play. I dont see anything in Amarok config to increase or use a memory cache.
View 5 Replies View RelatedI just upgraded KDE on my openSuSE 11.2 installation. I have never had any problems doing this in the past, but this time, when I rebooted, I noticed that after a few seconds of idle time, my CPU usage goes sky high. I ran top in a console and noticed the culprit was xorg. I am using an NVIDIA card on an AMD64 3200+ with 1 gig of memory. KDE version is currently 4.5.85.
Like I said, I didn't have this problem until the last update. Any ideas as to what could be causing this?
why does this process use 100% cpu. I have googled the process, and can't really see what it is doing.
View 3 Replies View RelatedStarting this week I am finding that my computer will randomly start to run high CPU and using TOP. I find that its the apt-get process thats running it up at 100% (please note that top will show processes up to 800% i7quad with turbo-boost show as 8 cores). Whenever I catch this I do let it run for a reasonable amount of time 10-15 mins to allow for updates or whatever its trying.
However, I do end up having to kill -9 it as just don't understand why its running so hot. I realize this is a really early bump but its not intended as so, I was browsing the forums and realized I left the title as apt-get.... and would be better if I gave a more descriptive title. hense the edit. I really hope I am not breaking any forum rules here as I really am not intent on bumping so soon.
After about 14 hours of running constantly, top shows that MyDNS is using 99 to 100% CPU. This is insane. There isn't any hints of why this is happening in the deamon logs.
Code:
my:/home/dingle# ps aux |grep mydns
nobody 24157 0.0 0.0 27364 1596 ? Ss Apr15 0:00 /usr/local/sbin/mydns -b
nobody 24158 83.1 0.1 29120 3344 ? R Apr15 1146:34 /usr/local/sbin/mydns -b
root 25565 0.0 0.0 5160 784 pts/0 R+ 17:25 0:00 grep mydns
my:/home/dingle#
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
24158 nobody 20 0 29120 3344 788 R 99 0.2 1148:24 mydns
Heck, it only has 11 domains to handle.
I want an application/program whatever that can save how much I have downloaded an uploaded, so I can keep track of things. Is there something like this that I can use on Linux?
View 8 Replies View RelatedRecently I decided to install my first linux. I choose openSUSE. Installation went smooothly and everything seemed to work just fine. After few days i noticed that sometimes my screen blinks for some time. During this blinking everything is working very slow.Today when blinking started i decided to see CPU usage of specific processes and I noticed that during this strange behaviour Xorg CPU usage is about 40% or more, it seems odd to me because usually it is few %. I am wondering what is the cause of this behaviour and how can I do something about it.I am using KDE, my graphics card is Intel GMA 4500.
View 6 Replies View Relatedas the title says my CPU goes on C0 state (100%) on every scroll and then returns down after a couple of seconds.
Is it normal?
I've checked this with powertop (and with my ears because I hear the fan noise...)
I am have been noticing nearly 100% Usage by the NTFS driver. According to top the "mount.ntfs-3g" use up to 100% when I am accessing NTFS partitions (one 1 core I believe). My CPU is reasonably fast Intel E8400 3.0 ghz. I find it horrible that its stuck at nearly 100% just because I decide to heavy access the NTFS file systems.
I have been google online and have seen dozens of similar complaints. Most people haven't found a real solution. Is there really any good solution for this?
When I was running Windows XP, I never noticed anywhere near 100% usage when access the Hard drive heavily. Is the Linux NTFS drives just very bad in performance compared to the native Windows drives?
However, I would like to ask if anyone else is experiencing Higher than normal CPU usage with openSuSE 11.4 PR?? My system, which is probably similar to others, increases the air flow with the fan on the CPU when it is working hard. Mine gets rather noisy. (don't have it on the floor, but right next to me) This fan speed increase has been lots more prevalent in the newest version of openSuSE.
Have also used 'top' and it looks like xorg is one of the biggest hogs. However, when I use VMware it goes into hyper drive a lot.
I am using Fedora 12. Prior to this I was using Ubuntu 9.10. In Fedora 12, I am facing a problem with battery power. Sometimes when it is fully charged I remove the power cord, battery power comes down to 40%-41%. It never happened with Ubuntu, which gave quite a good battery performance. My question is when it is showing Laptop Battery 100% i.e. fully charged, if I remove the cord why it comes down to 40%-41% (and always in this range).
View 8 Replies View RelatedI wanted to run some really heavy programs on my virtual Windows (32 bit installation). Thats why I have allocated 2GB of my 3GB ram to the virtual OS on Virtual Box.
the VirtualBox is warning me that the setting is non-optimal. What do you think is the optimal setting? Is it VB:UBUNTU::1.5GB:1.5GB? Please explain the reason if you know.
I've just installed the Netbook Edition of Lucid on my MacBook, and it works great, with two issues:
First, each time I start, the computer is extraordinarily laggy (pretty much unusable), until I run System Testing for video, and go through the whole process. Then it seems to work great. Also, I'm having a 100% CPU issue, which switches between my two CPUs. There was nothing under "my processes" that showed any kind of heavy use. But, under "all processes" was something called Backend. I killed the process and now everything seems to be working just fine.
One year ago I decided to give it a try with Ubuntu. I used the 9.04 Live CD, but it didn't perform as expected - it gave randomly errors on boot up, the interface was disappearing and reappearing, applications closed themselves randomly and in the end it usually froze and I had to do the magic SysRQ or hard restart. I installed it then through Wubi - and it was somewhat more stable. It behaved sometimes excellent all the time until I restart, but sometimes it just crashed with an error when I boot up. When 10.04 came out, I wanted to try it out, so I burned the CD.
It was the same as the 9.04 when using the Live CD and when installing it using Wubi it just fails on 25%. I don't have any problems with Windows 7 and another distribution like Knoppix (6.2) runs just fine and smooth from the Live CD. No problems what-so-ever. I haven't did any clean installation on my hard drive because I don't know if this would persist and leave me with a not working system. I still would like to address the problem from a Wubi installation or the Live CD before going for a full installation.
Here is my machine:
AMD Sempron 3300+ @2.0GHz
NVidia GeForce 7300LE 384MB
1 GB RAM DDR1 (2x512MB)
A31G PCCHIPS Mobo
I finally get mic working. Problem I have now is the volume is very low in Skype, I have set it to 100% but it is barely discernible on playback from the Skype test.
View 9 Replies View Related
