I was installing ubuntu 11.04 natty narwal daily build alongside windows 7 and ubuntu 10.10, and was resizing partition when computer was taking too long to resize, i then restarted computer, my computer appears to be working, but i get no display on my monitor, even though it is powered on. getting my bios to appear, or restoring my computer to normal.
View 9 Replies
Since install ubuntu 11.04 natty narwal (unity) i have had issues when leaving my computer for about 10-15 sometimes longer and returning to a frozen screensaver and ubuntu doesn't repond.Lately i have just enabled the screensaver to go on after 5 hours but this is bad for my screen.I am wondering if there is a fix for this i have updated today and still encountering the issue. And is this bug reported?
View 2 Replies View Relatedit's probably very silly, but for some reason I can't change Language settings in Ubuntu. I select English and click use for the whole system, then restart, but nothing changes. What else should I do?
View 1 Replies View RelatedStory: Installed 11.04 Natty Narwal from a live cd on my 2 year old HP Elitebook. The installation completed successfully according to the Live Session. I restart... Quote: GRUB Loading stage1.5 GRUB loading, please wait... Error 15
I have 2 other operating systems on the hdd, that I was previously managing with grub which was stored in the boot directory of Ubuntu 9.04 (on the partition that I formatted to install 11.04) What I have on hand:
[Code]...
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
A while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
I have two 250 GB drives setup with hardware RAID 1. I had on sda and sdb: 20 GB swap, 20 GB /, 198 GB /srv all was good until I started to run out of space on 20 GB /. So I booted the server with Suse 11.3 live cd and reduced the size of 20 GB swap to 10 GB and 198 GB /srv to 150 GB on sda and sdb.
All good so far, then tried to increase 20 GB / to 60 GB, but the Partition setup says the Max Size can be 20 GB, I have checked and I have 42.88 GB of Unpartitioned space. I have rescanned, rebooted, Server is still running fine by the way, but the 42.88 GB of free space is not made available for the expansion of 20 GB /.
I would like to resize my /home ( /dev/sdb6 ) partition - without losing data - to make room to create a swap partition (at the moment, I don't have any swap. Is it dangerous ?) IIRC, it was possible to change partition sizes from the install disk in repair mode (?) But I cannot find that repair mode on the 11.3 install disk. Has it been removed or is it somewhere deeper in the install or update process ?
[Code]....
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies View RelatedSo I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
View 9 Replies View RelatedI've installed Ubuntu 10.04 Desktop i386 using "Install inside Windows" option. In the installation i dedicated 3GB for the root parition. Now i have a Windows 7 and a Ubuntu.
Currently, I need more space for the Ubuntu root parition (just 50MB freespace remained!). I realized the it is a simple 3GB file in the Windows and root parition is virtually in that file.
So it should be possible to increase the size of the root parition. But i cannot find any way for this.
I do not want to reinstall the my Ubuntu or add another partition. Is there any painless way to just increase the size of root parition?
A friend is having trouble booting Natty from the live CD in order to install ubuntu. Grub is giving an error message "Error: prefix not set". or something like that when he tries to boot from the CD. My friend is speculating that it can't boot because it's an uefi drive. he got a lenovo thinkpad.
View 1 Replies View Relatedi was experiencing slow start ups since i installed ubuntu 11.04. it took about 20-30sec for the apple logo to come up (or rEFIt). today apple released EFI firmware updates which doesn't seem to install. reason is that the partition scheme is not compatible. EFI Firmware updates only install from GUID partition schemes.
DiskUtility tells me i have MBR. So it seems like Ubuntu changed the Partition Scheme.
Can any body confirm that? how can i make sure ubuntu installs into existing GUID? i will re-partition later today and give you an update if the EFI firmware update installs and boot time is faster.
When I installed Ubuntu on my system (a year or so ago) I forgot to add a BIOS Boot Partition. This is something of a problem considering that the partition type for my 2TB drive is GPT. Hence, whenever grub is updated I get a warning:
Code:
/usr/sbin/grub-setup: warn: This GPT partition label has no BIOS Boot Partition; embedding won't be possible!.
/usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and its use is discouraged..
Installation finished. No error reported.
[Code]....
If so, what is the rough sequence of commands to create the partition (without disturbing what is already there) and then setting it as a BIOS boot partition.
I want to give Mandriva 2010 a shot, and I want to resize my 500gb /home partition (logical) to make some room. It's an ext4 partition. Do you reckon I'll be safe resizing it from the Mandriva installer? or should I use an Ubuntu LiveCD first?
View 2 Replies View RelatedI didn't like the fact that Ubuntu allocated like 5gigs of swap with its automatic partitioning / install. So I decided to shrink it with gparted now it doesn't show up when I boot I have to select swap on in gparted to use it.
View 1 Replies View RelatedToday I was messing around with my partitions, and I decided to shrink my main partition that had Windows on it, so that I would could have one big storage partition and then a Windows 7 one and a Ubuntu one. Well, it didn't really work so I decided just to wait for Lucid to come out and start with a fresh install. So I went into EASEUS Partition Manager and resized my main Windows 7 partition back to its normal size. It had to reboot and did its stuff, and then when I restarted my computer, grub was showing the grub rescue> thing. So I went into the Windows 7 recovery disk, and tried all the BootRec.exe options. None of those worked. So I decided to go to the extreme and just delete Ubuntu completely.
I deleted the entire partition with GParted and then resized the main partition all the way. Then I booted into a Ubuntu live usb and re-installed Ubuntu. I thought it would just reinstall Grub and I would be able to get to both Ubuntu and Windows 7. It did install Grub, but now I can only boot into Ubuntu. It's really weird, because I can boot into windows, it just says starting windows and does the loading thing. And then EASEUS Partition Manager comes and says that all resize operations were complete successfully(because I hadn't booted into windows since I resized stuff with it) and then the screen just stays black for a long time. I don't know what to do. If I wait long enough, my computer just reboots...
I have a LVM logical volume, that contains a LUKS encrypted volume, on which is an ext4 filesystem. I shrank the partition to the minimum size. Next step is to luksClose the device, and then to resize the LVM logical volume. I suspect that LUKS has overhead. So if the ext4 filesystem was resized from, say 1TB to 500G, I have the idea that resizing the LVM LV to 500G does not take LUKS overhead into account and this might corrupt data on the end of the FS. So, what's the smart move to take? How do I calculate the safe minimum LV size? Or should I just give the 500G disk a few gigabytes extra to be sure?
View 4 Replies View RelatedAre there any bad effects of resizing a partition? (like loss of data).
View 6 Replies View RelatedI know there are probably alot of threads about lvm however they aren't addressing my problem. I want to extend the PEs available in a VG. This VG already has LVs and those are active and mounted. From what I read from the manpages of pvresize this should be perfectly possible.
Code:
pvresize resizes PhysicalVolume which may already be in a volume group and have active logical volumes allocated on it.
I did the following steps and wonder if anyone has the same issue. THe machine where I am talking about is an ESX VM.
1. Resized the vmdk in ESX (+1G)
2. Let the kernel reread the device geometry: echo 1 > /sys/block/sdc/device/rescan
3. fdisk shows me the new size... so far so good
4. I resize the partition using fdisk (remove, recreate) and gave it the 8e type (lvm)
5. wrote config to disk
6. executed partprobe
7. pvresize /dev/sdc
Here it goes wrong! Pvresize says in the verbose output it sees the same size however at the end it says the pv has been resized. I have seen when I put volumes "offline" using vgchange -a n vg on a test machine, and then try pvresize it seems to work ok. This is against what is in the manual as it says pvresize should work on online mounted volumes.
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
/dev/sda1 is XP; /dev/sda2 is Linux Mint
After running Lucid since it's release I decided to wipe out my Karmic partition yesterday in order to utilize that space better elsewhere. So I booted up with the Karmic LiveCD, using the option just to check out Ubuntu. Then I opened up Gparted, unswapped (unmounted) the swap partition, made sure nothing else was mounted, and proceeded to delete my Karmic partition which then provided me with about 40 GB of unused space.
Since I wanted to re-assign 10 of those GB to my primary Ubuntu software partition where I keep all of my personal data, I went ahead and resized that one to make it 10 GB larger. First I had to move the empty space over which took several hours, but that wasn't a problem. Resizing the partition wasn't a problem either. Then I wanted to re-assign the remaining 30 GB to my Ubuntu boot partition which contains strictly my Ubuntu system ... and that's where the problem is.
The remaining unused space on the hard disk is located directly next to my Ubuntu boot partition. No matter what I do while using Gparted via the LiveCD, it doesn't seem to be possible for me to enlarge that boot partition. Does anyone know how I can do this either via Gparted, the Disk Utility from Lucid, or even via the terminal?
Ubuntu 10 is great. Love it. Am still running with dual boot as am a bit of a games addict. However want to give Ubuntu more room as will be my work area. Can I make the Linux partition bigger with the disk utility that comes with Ubuntu 10.10?Played around with Linux in the early '90's.Sure has changed.Easy installation, device recognition better than Win 7 and great working environment.
View 3 Replies View RelatedI'm trying to install Ubuntu on my Mini 700 EL and when I start it doesn't give me the option to install it alongside Windows. Wubi does not give me the option to install onto the system, only to reboot and install it completely. When I try to install from booting from the USB key, I decide to edit partitions manually and I don't get the option of resizing the Windows partition, I can only delete it.
View 2 Replies View RelatedI'm installing 11.04 on a friend's laptop. I'm fairly familiar with Ubuntu, and I'm sure when I've install it previously it didn't take this long to resize the partition. It's been going for around 15 minutes. The loading cursor is still spinning, and the HDD activity light is on almost solidly, but it's been a long time with no updates. The log says only "ubuntu ntfsresize: Please make a test run using both the -n and -s options before real resizing!". Nothing appears to be happening. Is this normal? Never mind, it failed.
View 7 Replies View RelatedI have a small disk and I want to resize to 2 gb the swap partition, how I can do?
[root@server12 ~]# lvdisplay
--- Logical volume ---
LV Name /dev/vg_fedora11/lv_root
VG Name vg_fedora11
LV UUID Zwl9te-GQ1j-5Py3-Jiz0-JFAY-sy7n-iaV2TP
LV Write Access read/write
LV Status available
# open 1
LV Size 52.32 GB
Current LE 13393
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Logical volume ---
LV Name /dev/vg_fedora11/lv_swap
VG Name vg_fedora11
LV UUID k61vCI-YAdI-XgNX-xRaG-B7jY-CTMQ-LKOjwk
LV Write Access read/write
LV Status available
# open 1
LV Size 3.92 GB
Current LE 1004
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
I have slackware 13.1 installed on my desktop and I have all my hard drive dedicated to it. But now Im thinking about resizing my hard drive so that I can install windows so my brother can play games on it ( probly giving 50 Gigs to windows )I heard that parted ( located on slackware cd 1 ) is what I should use. So I was wondering if I need to backup any important files before doing the resizing? I would also appreciate it if someone could link an good tutorial for doing partition resizing .
View 2 Replies View RelatedI used to have a dual boot vista + ubuntu jaunty configuration. I installed ubuntu bootloader in the ubuntu partion not the MBR using advanced option during installation. Then i used Easy BCD to edit my Vista Boot Configuration and add an entry for Ubuntu.
Problem:
Everthing worked like a charm, until one day i decided to shrink my vista partition to get some free space using Microsoft Windows Disk Management Utility "diskmgmt.msc".
Now when i boot into linux i get grub prompt only.
When i do this (to find out my linux partition):
Then i booted with ubuntu live cd
Same thing : file not found
And i dont see my Ubuntu partition in My computer under Live DVD session.
Then i opened Gparted it doesn't show any ext2/ext3 partitions instead it shows my ubuntu partition as Upartitioned. Now is it that my ubuntu partition is dead, i can never recover it back.
I was trying to resize a NTFS partition using GParted and trying to enlarge it using some unallocated space (about 400 or 500 MB unallocated space) but something went wrong and now I am unable to access the NTFS partition. The unallocated space is still there.The error details are reported at the bottom of this mail, plus the content of fstab and mtab.Do you have any idea on what caused the error and how to recover the partition?
View 9 Replies View Related
