So I recently installed Ubuntu on a blank 250GB HD..
When I was doing the partitions I separated the / and /home and /bin etc
Ultimately I gave 30GB to my /home.
However I kind of need a bit more space now.
There is still a lot of empty space on my HD and I want to know is it possible to increase the size of my /home by about 20 GB?
So today I needed to switch from openSolaris to a viable OS on my workstation and decided to install openSUSE after having good experiences with it on my personal laptop. I ran into some problems partitioning one of the two hard disks installed on the system. I was limited on the amount of time I could spend at the office doing the install so I decided to use LVM on the one hard disk that seemed to work okay.
I picked LVM because although I don't know much at all about LVM, I at least know enough that it would allow me to expand the root and home partitions once I get the 2nd hard drive working correctly. So now that I've gotten the 2nd disk working okay, I've created two physical volumes on the 2nd drive, one to expand the root partition and one to expand the home partition. So, my question is, can I expand the root an home partitions while they are mounted or should I boot into a live CD environment before I expand the partitions? If I could expand them without booting into a different environment, that would be so great as I don't want to have to drive out to the office again before Monday. BTW, I am a new openSUSE user and an ex Ubuntu user. I loved the Ubuntu forums but had to switch because I do not agree with the direction that Ubuntu is taking.
Here is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
This forum might not be the best place for this question, but some people here are pretty knowledgeable and may have more insight than I do about this. Anyways, I'm thinking about expanding an NTFS (Windows 7) partition on my desktop computer into unallocated space. I know that there is a risk when shrinking a NTFS partition due to fragmentation but are there any risks of data loss from expanding a NTFS partition? My common sense tells me there isn't a risk but I want to be 100% sure I won't lose any files.
View 4 Replies View RelatedI installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies View RelatedTrying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View RelatedI've got Debian 6 loaded on a Dell E6520 laptop, and my / partition is nearly full. I used Parted Magic to make room adjacent to / so I could expand it, but pmagic won't work with this because it says that / is lvm2 and not mounted. But Debian 6 says that it doesn't have any lvm's and that / is ext3.
View 1 Replies View RelatedI have a directory like this:
mkdir test
cd test
touch file{0,1}.txt otherfile{0,1}.txt stuff{0,1}.txt
I want to run some command such as ls on certain types of files in the directory and have the * (glob) expand to all possibilities for the filename.
echo 'file otherfile' | tr ' ' '
' | xargs -I % ls %*.txt
This command does not expand the glob and tries to look for the literal 'file*.txt'
How do I write a similar command that expands the globs? (I want to use xargs so the command can be run in parallel)
I have used linux on and off for a few years now but still jump between distros.
I have just got my old toshiba laptop working (got lucky and got given another broken laptop for free and managed to merge them into one working laptop )
I am about to install mint 10 RC and fedora and just realised why on earth have I not created a seperate partition for /home?
I have done a quick google and I know it can be done but I thought id ask you guys if you had any tips or advice on sharing files between 2 or more distros?
I have found a how-to for this but if there is a specific tutorial that you would recommend?
Doing some more research into it and I have found that sharing the /home file is 'not adviced' unless using differant user names for each install... so I am now planning on making a /data partition instead.
I am running Ubuntu with root on one partition and /home on another. I am proposing adding another distro (probably openSUSE) with its root on a partition which is unused at present, and the same /home partition as Ubuntu. Will using the same /home partition for two distros work? I realise that I will have to use the same usernames and passwords for both.
View 5 Replies View RelatedHow can I extend /home or / partition through LVM. Is this possible ?
View 8 Replies View RelatedI want to install Ubuntu side by side with Windows. I have a big NTFS partition that has a folder with the same name as my username (let's say "joe"). Inside "joe" I have my personal files. Outside "joe" but still in the partition, there is random stuff that doesn't really belong anywhere, or now useless programs that I had to install there because the main Windows partition ran out of space. If during the Ubuntu installer I choose to use that partition as /home and make a user called "joe", will everything work fine?
View 1 Replies View RelatedI created a partition in my hard disk for my data (documents, multimedia, etc.).How can I:Move the /home/ directory to the new partitionMake the OS (Ubuntu Linux) treat that directory as the default /home/.
View 1 Replies View RelatedIs there a way to move /home to a separate partition?
also, i would like to know if the /home partition can be fat32 or ntfs.
There was a Toshiba Satellite notebook with XP I decided to install Fedora 13 in dual boot mode.So, I booted with Gparted and shrunk the ndows XP partition to just 24 GB.Then I set up partitions for Linux this way/boot, ext4 256 MB/, ext4 16 GB/home, ntfs 176 GBswap, 8 GBI intentionally left about 8 GB left just in caseThen I proceeded to install Fedora 13.I used the customized mode to use the already set up partitions and keep Windows XP.At the moment of setting the mounting points, fine with /boot, / and swap. But Anaconda wouldn't accept mounting point for /home.I went on anyway.Fedora got set up and run moothly.However, /home resided in / with only 10 GB left.And the /home partition could be seen as a separate disk with its 176 GB.This is /etc/fstab:
#
# /etc/fstab
# Created by anaconda on Sun Sep 5 05:46:26 2010
[code]...
due to perpetual Mandriva worsening by the day I have recently took the plunge into Ubuntu. So far it seems perfect for me, my hardware is supported, I am getting a very pleasant desktop experience from it (so to say, the situation has reversed from 3 years ago when Mandriva 2008 was the better choice over the Ubuntu of those times).
However, it did not occur to me that Kbuntu was the KDE version I am now running Gnome Ubuntu. And hey, it is a nice Mac replica I would like to stay on Gnome! But! although I have mounted the old /home partition right onto its former /dev/sda5, Ubuntu Gnome would not allow me to log in with former Mandriva KDE user. The /home/my_old_user folder is still there...
Any way to keep my old KDE user in new distro on Gnome ? I am just guessing this would be the reason why Gnome does not see it - the old user account (because it comes from a KDE environment). Or ?
EDIT: I am now on kubuntu, and still can not access the old user account. How come ?
Is it practical to have 2 different Linux distributions which share the same home partition? I know that programs save their configuration in home directory and that can mess up, yet I would like to play with different Linux distros at the same time while always finding my files at home.
View 10 Replies View Relatedrecently i made a backup of my home directory in 10.10 before reinstalling 10.10. again.This time I chose to manually define the partitions (50GB Root, 25GB Swap, 325GB Home)Now i wish to migrate the old home into the newly installed home, which is on a separate partition.I have found the following documentation URL...Still, as a beginner I am not quite sure about the necessary steps to perform.As the new home is located on a separate partition is it possible to simple delete all directories there and copy all directories from old home to new home with rsync?
Do I have to install all the software that corresponds to the old home first followed by migrating home or first migrating home followed by installing the software such as thunderbird, Texlive2010 etc.Guess that migration should take place at a later stage. Otherwise my old profile files from firefox and thunderbird will be overwriten by new ones?
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
I dual boot into Arch Linux and OS X 10.6 on my MacBook pro. I synced my UID between both OSes and created an HFS partition (with no journaling) to use as a shared home/Users partition. For the most part it works just as I'd expect, but sometimes when I'm booted into OS X certain files are "locked" (when I get info on a particular file the "Locked" box is checked under the "General" pane. I can resolve the issue by manually unchecking the box) and/or I get "Operation not permitted" when I try deleting or chmod'ing a file. In both cases I don't see anything out of the ordinary on the permission bits displayed with ls -l, except for a trailing '@' character in the position where the sticky bit would normally occur:
This '@' character shows up on ALL normal files, so doesn't seem to be linked to the locked/operation not permission situation.
On the Linux side of things I never have permission problems. To the best of my limited knowledge and experience with ACLs I've not found any ACLs on any of the files in question.
For what it's worth, I do most of my file editing using emacs (Aquamacs in OSX), is it possible it is setting weird permission bits?
What is the "locked" setting that OS X uses and does it have a permission bit equivalent (so at the very least I could recursively unlock all files in my home directory from the terminal) why might some, but not other files get "locked" when booting into OS X what is the meaning of the '@' character?
I'm a big fan of the NSLU2-Linux project so I've been doing some developments for this platform for the last three years. In order for the end users to test my applications, I initially created an USB image with everything bundled into it. Then, they only had to download the image and decompress (dd) it into an USB pendrive with capacity equal or greater than 4 GB. The fact is that this has brought me lots of problems in the practice since my Web server hardly accepts long file transfers.
Moreover, flash spaces beyond 4GB are wasted. As result, I'm now considering a different approach as I don't know how to do it. Well, I've thought that I could maybe create an USB disk image only with the root file system partition. Then, the first time a script runs, it creates a home partition and formats it into the rest of the space available in the pendrive. There is maybe some command-line alternative to fdisk without having the user to interact during the format process... ??
i decided to try archlinux in my pc a while ago so i installed it... after three months i started to miss slackware so i decided to reinstall it but i wanted to save my /home partition so when i installed slackware i left my /home partition from arch hoping that i could just mount it on slackware...but now when i try to mount that /home partition this is what i get:
bash-3.1# mount /dev/sda4
mount: wrong fs type, bad option, bad superblock on /dev/sda4,missing codepage or helper program,or other error In some cases useful info is found in syslog - try dmesg | tail or so
code....
So i dont really know what is going on here but i hope somebody could help me because i really NEED to get the data from that partition.
oh and by the way i installed slackware on ext4 partitions and the /home partition from arch is ext3 so i dont know if that's maybe the problem o_O?
l my root (/) partition has 11G free space and my /home is only left with 5g around and /usr has around 8g in my fedora 13 .So is there any possibility to "resize" the root partition and add it to home partition bcoz i see the opposite in the threads(resize home to add space to root).My home has nothin more than a movie which is 700MB and i've installed some new application yesterday. But it shows half of the space is almost used!!!
/dev/sda7 12G 925M 11G 9% /
tmpfs 497M 2.6M 495M 1% /dev/shm
/dev/sda9 12G 5.0G 6.0G 46% /home
/dev/sda8 12G 4.1G 7.3G 36% /usr
My total filesystem capacity:39.9 GB(used 4.2GB,available:35.7 GB)
Currently,i have only single partition.
i wanna make again a new partition from the single existing partition where root(/) folder stored.
my aim is to separate the home folder from the existing partition to the new partition.
whenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
View 3 Replies View Relatedi have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedI installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View Related