I've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI am ready to reclaim the disk space that is currently being used by XP in my dualboot scenario. Per the Gparted scan below, my hard drive is currently being sequenced as sda1 (NTFS data only, which I mounted in Ubuntu and write my working documents to), sda2 (XP operating system/boot drive). Ubuntu is on sda3, with home on sda4. I'm currently running 9.10.
I would like to eliminate the contents of sda2, and migrate sda1 contents to ext4. Question is, what are the best steps. I have good backups of everything, and sync my NTFS data to a NAS.
My grub.cfg looks as follows (am running 1.97)
Code:
I've got a win7/ubuntu 10.04 dual boot running on my system. I did the usual of installing 7 first, then ubuntu and using it as the default boot option. I now want to get rid of win 7 and expand the ubuntu installation into the free space. My current hdd structure is in the attachment. If I just boot a live cd and gparted to remove the win 7 partitions and expand the ubuntu installation into the free space, will that work or will it have a massive panic? how to I get grub to silently boot after without offering me any boot options?
View 7 Replies View RelatedI have my pc setup with 2 hard disks, my main HD is running Win XP and the second HD is loaded with 9.1, the disk I loaded 9.1 on is a 40 gig HD, I wanted to try out 9.1 as a clean install before mucking around with dual boot. I really like 9.1 and now I want to change the way I am setup so I can run a dual boot. Right now the way it is I go through GRUB to choose either linux or win, it defaults to Linux, I removed the disk the 40 gig drive the other day and when I do I can't boot up, I get an error message telling me something like Grub not found (Duh right I took the HD out) I want to reset my comp so the 40 gig drive is visible to win and do the dual boot with 9.1 inside of windows.
My questions are this.
1. How would change the current boot config. so that windows loads and I don't have to use GRUB to choose my O/S.
2. How would I go about removing 9.1 from the 40 gig drive and leaving it blank so I can utilize it for windows.
my main concern here is getting the pc set back up so I can boot into windows without using the GRUB menu, I'm on my work pc and getting some greif from my boss on this. I'm worried that if I just remove 9.1 from the 40 gig drive that I won't be able to load windows, like when I physically removed the HD from the pc.
Can i even format without removing windows in the progress? If not, what would be the best way to just remove everything i have on the computer to get it as close as possible to a new computer? I don't have windows install CD because the laptop had Vista pre-installed. So i must be careful what i remove or my brother won't buy the laptop I'm mostly concerned about killing the GRUB and making me unable to start the computer.
View 8 Replies View RelatedSo I made my netbook a dual-boot machine about 2 months ago - it came with windows 7 and I added ubuntu. I've been running Ubuntu on my desktop machine for a while, so I'm pretty comfortable.
Now I'd like to completely get rid of the windows partition on my netbook and make the whole thing ubuntu. However, I've downloaded and installed so many programs and packages and libraries that I don't want to have to do it again. Is there a way to remove the windows partition (basically expanding the ubuntu side) and keep my programs/settings/libraries/packages/etc on the linux side? Or do I have to erase the partitions and start over with a fresh install?
Am running Karmic and Windows7 dual booting with separate hard drives. I want to remove Windows 7 and leave Karmic on it's single drive. I am concerned that I will cause a boot problem if I just 'unplug' the Windows 7 drive.
View 2 Replies View RelatedToday I've decided that I would like to remove my useless, freezing windows install from my Ubuntu laptop and only use Ubuntu... booting windows XP from a virtual box whenever I need to use a Windows application with poor Wine support. Any safe way I can go about doing that? I tried googling this, but all I found was the opposite, remove ubuntu from windows... which is quite sad. Anyway, windows is using up a ton of space that it doesn't need to. It takes me 5 minutes to even get it booted and after using Ubuntu, I have no patience left for the program. What should I do?
View 8 Replies View RelatedI've just installed Ubuntu 10.10 using Wubi inside of Windblows and I want to remove Windblows completely.What filestem does Ubuntu use and how do i delete the NTFS partitions and redistribute the free space once partition removed?I only installed through Windblows cos I couldn't get a decent cd burnt to install from there.Just noticed that it looks like the installer has locked up again becuase there is no mouse action. If it has locked up again, i think it may be the cd drive playing up. If i replace it temporarily with a newer drive will Ubunutu kick up a fuss when i out the old one back in. I don't intend using a cd-rom anyway. i just want to use it as a domain controller and file server.
View 3 Replies View RelatedI have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk)
- Select windows partition ( /dev/sda1 )
- Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedI tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies View RelatedWhen openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic
[code]....
I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.
View 6 Replies View RelatedHW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I have a system dual booting Ubuntu with XP.Up to upgrade to Lucid, grub worked fine, but now any attempt to use the grub menu to move to XP gives only another grub menu.I need to use XP once in a while. How do I resolve this
View 9 Replies View RelatedI have Windows xp and Ubuntu 10.04 in my system and last fine morning I was working in windows and when I restarts the system as there were some problem in the audio I found that the grub is not loading. Computer boots directly in the windows xp mode and not giving the possibility to boot in the ubuntu OS. Also, the windows xp restarts continuously with a blue screen for just a second.
This happened out-of-the blue. What might be the possible reason for this and how to get rid of this problem..
I am running a dual-boot of Ubuntu 10.04 and Windows 7. My current setup uses EasyBCD to pick between Ubuntu and windows. If I pick Ubuntu, it then fires up GRUB, which then goes to Ubuntu. My question is: Can I skip GRUB altogether in the boot process? I rather suspect that it's slowing things down a lot. I've set the GRUB default OS timeout to 0, but it still boots slowly, which annoys me. way to skip GRUB entirely and use only EasyBCD for both OSes?
View 4 Replies View RelatedOn reboot the GRUB2 installer shows me the options for OS - I select Windows XP and then I get a blank screen with a flashing cursor - and nothing.. I CTRL ALT DEL and it reboots back to GRUB2 and I select UBUNTU and I log in. This is the first time I have tried to reboot Windows XP after fresh install of UBUNTU
[Code]....
On my hard disk I have ubuntu 9.10 (/dev/sda6) and Slackware 13 (/dev/hda1). Since Ubunutu was installed second, it replaced Slackware's lilo with grub. Anyway I modified grub and got Slackware 13 booting also, I has been this way for a couple of months. Tonight slackware would not boot, it kernel panic'ed.Complained about no device /dev/sda1 and listed possible devices, /dev/hda1 (What it is supposed to be) being one of them. What the heck, what changed???
A quick check of /boot/grub.cfg first showed that the las cahnged date was 2010-1-30. What? I have not touched grub.cfg since the Ubuntu 9.10 install. But, I remember that about that date I did a system update. there were four Slackware menuentries, and I remember only one. Strange. Anyway I changed Slackware's grub menu entry to root=/dev/hda1 and rebooted. Now it complained about no known file system, Slackware 13 is ext4. Here is the Slackware menuentry:
[Code]...
Here the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies View Related