OpenSUSE Install :: Pc Is Frozen After Reboot?

Jul 17, 2011

config is pentium D and nvidia 7300 , plus 1 gb of ram ; ok they had an 11.2 opensuse version and installed 11.4 from a cd (or dvd) they bought in a shop , the pc is working ok, but upgrades are NOT , how come ? This looks stange to me

- in init 3 : zypper cc && zypper ref && zypper up does not work : after reboot using "shutdown -r now" the pc is frozen, with the green screen and white lizard (no access to keyboard, nor to grub options), ctrl+ alt+ f1 is ko for example.

- in init 3 and only with 3 repos (oss, non-oss, and update of 11.4) a zypper dup works but a bug with mozilla firefox 4 brading opensuse which is ko . we continued , can one package break down a zypper dup ? ( same ko result : after reboot usinf shutdown -r now the pc is frozen with the green screen and white lizard (no access to keyboard, nor to grub options) )

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Mouse Frozen After Upgrade 11.3

Jul 15, 2010

Just upgraded to 11.3 from the terminal. There were a few hiccups, but it said to run "zypper verify," and it downloaded a few files and finished. When I rebooted, the graphics were fine, but the arrow in the middle of the screen is frozen. I can move the mouse till I get carpal tunnel, but the arrow ain't gion' nowhere. So how do I "unfreeze" my mouse? (Besides knitting it a sweater!) I'm hoping for a "ctrl/f2", and that aterminal can be opened that way, with a command to wake up the mouse dameon.

View 3 Replies View Related

OpenSUSE Install :: Suse Software Management Frozen

May 27, 2011

After an installation of SUSE 11.1 the software management hangs short after it started with YaST2.Kwin sends a message that the Window with title YaST2 is not responding. Only the termination works.What could be the reason, and what could help? Could you assist me with your knowledge?

View 2 Replies View Related

OpenSUSE Install :: 11.4 - Boot With Frozen Screen Right At The First Second - Repeatable?

Jun 23, 2011

I have a repeatable and annoying problem that seems to be connected with the graphics card driver of nvidea. I had another card before (7900 card) and I have after having had a malfunction now a nvidea 430. Mainboard Gygabyte with AMD 790 Chipset, GB Ram. The opensuse system is fully patched and updated, newest kernel but the same error occurred with another graphic card and with the precedent kernel and with the precedent nvidia video driver.

Now, the problem is as follows:
System is dual boot with options:
openSUSE 11.4 64 bit

[code]...

View 8 Replies View Related

OpenSUSE Install :: Key-stroke Sequence To Exit A Frozen Desktop?

Jul 27, 2010

I wonder if this is the right sub-forum I quite often play around with beta releases. Sometime the Screen freezes. (so what) However is there a key-stroke ctrl-?-? to get to a login prompt ????(rather then press the reboot button) ???

View 3 Replies View Related

OpenSUSE Install :: Boot Sometimes Ends With A Frozen White Screen?

Jan 25, 2011

I got a problem with my opensuse 11.3 machine. Sometimes it doesn't boot up correctly and ends with a frozen white screen. It's not just x that is broken the whole pc is frozen as I can not ping or ssh into my machine

View 9 Replies View Related

OpenSUSE Install :: Lost All Control - Machine Is Frozen With No Video

Jun 7, 2011

how to regain some type of display. I was trying to get a printer online. The printer was recognized but would not print. I went away from the machine for a few hours and when I came back I had a blank screen. I turned the machine off but nothing comes back up. All key strokes fail to give me anything.

View 6 Replies View Related

OpenSUSE Install :: Frozen Mouse Cursor Image After Screen Power Off?

Sep 15, 2010

I run a HTPC which I recently upgraded 11.2 -> 11.3.Most things work fine but I've got an oddity. After the TV is shut down and restored the mouse cursor is "frozen":The old mouse image stays where it isHowever, the mouse IS active, in that you can (blindly) move the mouse, see it mouse-over widgets, and activate them - there's just no visible cursor where the hotspot is.Hardware is ATI chipset (can't remember which, offhand, but it's only a year or two old), running AMD driver, with a HDMI link to the TV.

View 2 Replies View Related

Ubuntu :: Locked Out - Touchpad Is Frozen And When Try To Reboot My Passwords Are "incorrect"

Jun 17, 2011

I have Ubuntu Lucid Lynx on my Samsung N 130 netbook... I think I must have accidentally pressed Control and one of the Function buttons... My touchpad is now frozen and when I try to reboot my passwords are "incorrect"...

View 5 Replies View Related

Ubuntu :: Computer Seemed To Be Frozen - Reboot - No Init Found. Try Passing Init - Bootarg"

Jan 1, 2011

I've been dual booting 10.10 with Windows7 for about a month. Today is the first time I've encountered a serious problem.

This morning, nothing functioned properly after trying to open several programs. The computer seemed to be "frozen", although the mouse was working fine.

I decided to reboot, but then encountered an even bigger problem.

It failed to boot and got this message: no init found. try passing init= bootarg

The problem now is that it requires a Live CD session and I keep getting this: GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)

In case it matters, I didn't install 10.10 from an ISO, I just upgraded from 10.04.

View 2 Replies View Related

OpenSUSE Install :: Fresh Install + Update & Reboot = Unable To Open Session?

Sep 14, 2010

I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again

View 1 Replies View Related

OpenSUSE Install :: Fresh Install 11.4 Blocks At Splash Screen On Reboot

Jun 30, 2011

I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.

Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.

Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.

I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.

Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.

So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.

View 4 Replies View Related

OpenSUSE Install :: 11.3 64bit Install Freezes After Reboot During Autoconfiguration - GeForce 9300 Chipset (MCP7A)

Sep 15, 2010

I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.

I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!

This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason

View 9 Replies View Related

OpenSUSE Install :: HP Tx2525nr Install Fails On 1st Reboot After Installation?

Jan 26, 2010

This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?

View 1 Replies View Related

OpenSUSE Install :: Grub Error After Install And First Reboot?

Dec 21, 2010

I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:

md0 /boot
md1 /
md2 swap

or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)

View 2 Replies View Related

OpenSUSE Install :: Panel Bar Changes After Reboot

Mar 22, 2010

I use the Air openSUSE theme for my panel bar, etc., yet, after rebooting (or starting up the computer after it has been shut down), the panel bar comes up as if it were configured with some kind of black theme, which I do not like - you can still see things like icons for windows, launcher, etc. except for the clock, since its font color is black.

How do I put a stop to this? I have tried everything I can think of, customized settings, different themes, and so on, yet I get the same results after booting into openSUSE.I am using the openSUSE 11.2 KDE version.

View 9 Replies View Related

OpenSUSE :: 11.3 Will Not Load After First Reboot During Install / Fix It?

Oct 26, 2010

11.3 will not load after the first reboot during install, after the reboot the screen just goes blank and that's all.

This is a single setup no dual boot, from openSUSE-11.3-DVD-x86_64, on brand new Latitude E6510 laptop.

View 9 Replies View Related

OpenSUSE Install :: Reboot Hangs At Many Points?

Jul 1, 2009

Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?

View 9 Replies View Related

OpenSUSE Install :: 11.2 - Screen Resolution Way Off On Reboot

Jan 12, 2010

I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.

View 9 Replies View Related

OpenSUSE Install :: Reboot Directly To Another System?

Jul 7, 2010

in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files

View 4 Replies View Related

OpenSUSE Install :: Re-initialize Soundcard After Reboot (11.3)?

Jan 2, 2011

I have the problem that for working properly my soundcard needs sort of re-initialisation after every reboot (11.3, 64 bit). I have to change a setting in the sound module of yast that causes the yast to rerun its final steps. What is not working otherwise is audio playback from a usb TV-stick (recording is no problem, same as playing an audio/video file). any idea what might be the problem? how to call the final steps of the sound module of yast from the command line, I could at least put that call into boot.local to avoid having to call yast.

View 9 Replies View Related

OpenSUSE Install :: Ext3 Usb Dev Not Found After Reboot ?

Feb 23, 2011

I recently got myself a seagate 2 TB external usb harddrive.

I formatted it with ext3 and the fstab looks thus:

Code:

(the problematic device is in red) it worked well for a couple of weeks, but then, one day, after i rebooted, my machine can t find the device:

Code:

I ve rebooted a couple of times, but to no avail.

View 4 Replies View Related

OpenSUSE Install :: Remotely Reboot To A Given Kernel?

Mar 16, 2011

I would like to remotely reboot a computer (via ssh) to a non default kernel. If I just type reboot, it reboots to the default kernel. Man reboot(8) does not give any hint so I am not sure that is possible at all. I have found nothing googling around either.

View 6 Replies View Related

OpenSUSE Install :: No Umount On Shutdown Or Reboot?

Apr 2, 2011

On one of my computers that I upgraded from 11.3 to 11.4 with a SSD HDD, it no longer umounts any disks on reboot or shutdown, there are no errors shown, it goes from sending TERM and KILL to rebooting.here is my fstab:

Code:
/dev/disk/by-id/ata-OCZ_SOLID_SSD_MK0109030A6100011-part1 /boot ext4 acl,user_xattr,noatime 1 2

[code]...

View 6 Replies View Related

OpenSUSE Install :: Strange Behaviours After Every Reboot?

May 11, 2011

I hope I open the thread in the correct section.I have just installed OpenSuse 11.4 with XFCE environment on my Acer Aspire 5738Z.Everytime I boot, I experience the following "strange" behaviours:1 - I need to reconfigure manually the "capture device" with Alsamixer to change it from "micro" to "internal micro". Even though I restore a taylored asound file with alsactl, as I used to do when I used Ubuntu, every time I restart my computer, the capture is on "micro" again.2 - In the panel, I need to remove the Thunderbird launcher. I remove it everytime I log in on Suse, but it comes back after every reboot.3 - Skype and Pidgin start automatically, even though they no longer are in my list of apps to start automatically after log in. (They once were, but then two instances of each tried to start at the same time).Besides, I have another problem with the action button, the one that enables to shut down, restart, hibernate, etc. When I click on it, I will immediately be logged off.

View 1 Replies View Related

OpenSUSE Install :: Raid5 Not Starting Up After Reboot?

May 29, 2011

Running OpenSuse 11.4 and have setup 2 x Raid5 configs - raid created, disks format, everything working fine. I've just rebooted and the raid5 fails to initialize.

Getting these errors:

Code:
May 29 16:58:30 suse kernel: [ 1788.170692] md: md0 stopped.
May 29 16:58:30 suse kernel: [ 1788.197864] md: invalid superblock checksum on sdb1
May 29 16:58:30 suse kernel: [ 1788.197876] md: sdb1 does not have a valid v0.90 superblock, not importing!

[Code]....

View 9 Replies View Related

OpenSUSE Install :: Suse 11.4 Installer Causes Reboot?

Jun 4, 2011

I am in possession of a new HP HPE-570f PC which I bought this morning. This has AMD Phenon 1090T and AMD Radeon HD 6770 graphics card. The OEM Windows 7 works fine. When I try to install Suse 11.4 using same DVD that works on my other (older) machine, I see the Suse Installation screen from which I select "installation", then comes the "Loading Linux Kernel" progress bar. As soon as the progress bar gets to the end, the computer reboots! Then of course I end up back at the Installation screen since the DVD is still in the drive.

View 9 Replies View Related

OpenSUSE :: [Ctrl]+[Alt]+[F1]~[F7] Cause 11.2 To Frozen?

Apr 7, 2010

1) start up the openSUSE 11.2 GNOME desktop. 2) press [Ctrl]+[Alt]+[F1] --- give me the text mode (tty1)3) press [Ctrl]+[Alt]+[F7] --- back to the desktop.

View 8 Replies View Related

OpenSUSE Install :: Suse 11.2 - After Installation An Reboot - Blackscreen?

Nov 18, 2009

After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist

"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?

View 9 Replies View Related

OpenSUSE Install :: Weird Noise At Shutdown Or Reboot?

Apr 4, 2010

Whenever I reboot or shut down my computer (running OpenSuse 11.2 on a Dell Studio 15), it makes a weird noise that sounds like very loud static, even if my sound was muted when I selected shut down.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved